397 research outputs found
Methodology for standard cell compliance and detailed placement for triple patterning lithography
As the feature size of semiconductor process further scales to sub-16nm
technology node, triple patterning lithography (TPL) has been regarded one of
the most promising lithography candidates. M1 and contact layers, which are
usually deployed within standard cells, are most critical and complex parts for
modern digital designs. Traditional design flow that ignores TPL in early
stages may limit the potential to resolve all the TPL conflicts. In this paper,
we propose a coherent framework, including standard cell compliance and
detailed placement to enable TPL friendly design. Considering TPL constraints
during early design stages, such as standard cell compliance, improves the
layout decomposability. With the pre-coloring solutions of standard cells, we
present a TPL aware detailed placement, where the layout decomposition and
placement can be resolved simultaneously. Our experimental results show that,
with negligible impact on critical path delay, our framework can resolve the
conflicts much more easily, compared with the traditional physical design flow
and followed layout decomposition
A High-Performance Triple Patterning Layout Decomposer with Balanced Density
Triple patterning lithography (TPL) has received more and more attentions
from industry as one of the leading candidate for 14nm/11nm nodes. In this
paper, we propose a high performance layout decomposer for TPL. Density
balancing is seamlessly integrated into all key steps in our TPL layout
decomposition, including density-balanced semi-definite programming (SDP),
density-based mapping, and density-balanced graph simplification. Our new TPL
decomposer can obtain high performance even compared to previous
state-of-the-art layout decomposers which are not balanced-density aware, e.g.,
by Yu et al. (ICCAD'11), Fang et al. (DAC'12), and Kuang et al. (DAC'13).
Furthermore, the balanced-density version of our decomposer can provide more
balanced density which leads to less edge placement error (EPE), while the
conflict and stitch numbers are still very comparable to our
non-balanced-density baseline
Layout Decomposition for Quadruple Patterning Lithography and Beyond
For next-generation technology nodes, multiple patterning lithography (MPL)
has emerged as a key solution, e.g., triple patterning lithography (TPL) for
14/11nm, and quadruple patterning lithography (QPL) for sub-10nm. In this
paper, we propose a generic and robust layout decomposition framework for QPL,
which can be further extended to handle any general K-patterning lithography
(K4). Our framework is based on the semidefinite programming (SDP)
formulation with novel coloring encoding. Meanwhile, we propose fast yet
effective coloring assignment and achieve significant speedup. To our best
knowledge, this is the first work on the general multiple patterning
lithography layout decomposition.Comment: DAC'201
Recommended from our members
Improved Physical Design for Manufacturing Awareness and Advanced VLSI
Increasing challenges arise with each new semiconductor technology node, especially in advanced nodes, where the industry tries to extract every ounce of benefit as it approaches the limits of physics, through manufacturing-aware design technology co-optimization and design-based equivalent scaling. The increasing complexity of design and process technologies, and ever-more complex design rules, also become hurdles for academic researchers, separating academic researchers from the most up-to-date technical issues.This thesis presents innovative methodologies and optimizations to address the above challenges. There are three directions in this thesis: (i) manufacturing-aware design technology co-optimization; (ii) advanced node design-based equivalent scaling; and (iii) an open source academic detailed routing flow.To realize manufacturing-aware design technology co-optimization, this thesis presents two works: (i) a multi-row detailed placement optimization for neighbor diffusion effect mitigation between neighboring standard cells; and (ii) a post-routing optimization to generate 2D block mask layout for dummy segment removal in self-aligned multiple patterning.To achieve advanced node design-based equivalent scaling, this thesis presents two improved physical design methodologies: (i) a post-placement flop tray generation approach for clock power reduction; and (ii) a detailed placement approach to exploit inter-row M1 routing for congestion and wirelength reduction.To address the increasing gap between academia and industry, this thesis presents two works toward an open source academic detailed routing flow: (i) a complete, robust, scalable and design ruleaware dynamic programming-based pin access analysis framework; and (ii) TritonRoute – the open source detailed router that is capable of delivering DRC-clean detailed routing solutions in advanced nodes.This thesis concludes with a summary of its contributions and open directions for future research
EDA Solutions for Double Patterning Lithography
Expanding the optical lithography to 32-nm node and beyond is impossible using existing single exposure systems. As such, double patterning lithography (DPL) is the most promising option to generate the required lithography resolution, where the target layout is printed with two separate imaging processes. Among different DPL techniques litho-etch-litho-etch (LELE) and self-aligned double patterning (SADP) methods are the most popular ones, which apply two complete exposure lithography steps and an exposure lithography followed by a chemical imaging process, respectively.
To realize double patterning lithography, patterns located within a sub-resolution distance should be assigned to either of the imaging sub-processes, so-called layout decomposition. To achieve the optimal design yield, layout decomposition problem should be solved with respect to characteristics and limitations of the applied DPL method. For example, although patterns can be split between the two sub-masks in the LELE method to generate conflict free masks, this pattern split is not favorable due to its sensitivity to lithography imperfections such as the overlay error. On the other hand, pattern split is forbidden in SADP method because it results in non-resolvable gap failures in the final image. In addition to the functional yield, layout decomposition affects parametric yield of the designs printed by double patterning.
To deal with both functional and parametric challenges of DPL in dense and large layouts, EDA solutions for DPL are addressed in this thesis. To this end, we proposed a statistical method to determine the interconnect width and space for the LELE method under the effect of random overlay error. In addition to yield maximization and achieving near-optimal trade-off between different parametric requirements, the proposed method provides valuable insight about the trend of parametric and functional yields in future technology nodes.
Next, we focused on self-aligned double patterning and proposed layout design and decomposition methods to provide SADP-compatible layouts and litho-friendly decomposed layouts. Precisely, a grid-based ILP formulation of SADP decomposition was proposed to avoid decomposition conflicts and improve overall printability of layout patterns. To overcome the limited applicability of this ILP-based method to fully-decomposable layouts, a partitioning-based method is also proposed which is faster than the grid-based ILP decomposition method too. Moreover, an A∗-based SADP-aware detailed routing method was proposed which performs detailed routing and layout decomposition simultaneously to avoid litho-limited layout configurations. The proposed router preserves the uniformity of pattern density between the two sub-masks of the SADP process. We finally extended our decomposition method for double patterning to triple patterning and formulated SATP decomposition by integer linear programming. In addition to conventional minimum width and spacing constraints, the proposed decomposition method minimizes the mandrel-trim co-defined edges and maximizes the layout features printed by structural spacers to achieve the minimum pattern distortion.
This thesis is one of the very early researches that investigates the concept of litho-friendliness in SADP-aware layout design and decomposition. Provided by experimental results, the proposed methods advance prior state-of-the-art algorithms in various aspects. Precisely, the suggested SADP decomposition methods improve total length of sensitive trim edges, total EPE and overall printability of attempted designs. Additionally, our SADP-detailed routing method provides SADP-decomposable layouts in which trim patterns are highly robust to lithography imperfections. The experimental results for SATP decomposition show that total length of overlay-sensitive layout patterns, total EPE and overall printability of the attempted designs are also improved considerably by the proposed decomposition method. Additionally, the methods in this PhD thesis reveal several insights for the upcoming technology nodes which can be considered for improving the manufacturability of these nodes
Recommended from our members
Lithography aware physical design and layout optimization for manufacturability
textAs technology continues to scale down, semiconductor manufacturing with 193nm lithography is greatly challenging because the required half pitch size is beyond the resolution limit. In order to bridge the gap between design requirements and manufacturing limitations, various resolution enhancement techniques have been proposed to avoid potentially problematic patterns and to improve product yield. In addition, co-optimization between design performance and manufacturability can further provide flexible and significant yield improvement, and it has become necessary for advanced technology nodes. This dissertation presents the methodologies to consider the lithography impact in different design stages to improve layout manufacturability. Double Patterning Lithography (DPL) has been a promising solution for sub-22nm node volume production. Among DPL techniques, self-aligned double patterning (SADP) provides good overlay controllability when two masks are not aligned perfectly. However, SADP process places several limitations on design flexibility and still exists many challenges in physical design stages. Starting from the early design stage, we analyze the standard cell designs and construct a set of SADP-aware cell placement candidates, and show that placement legalization based on this SADP awareness information can effectively resolve DPL conflicts. In the detailed routing stage, we propose a new routing cost formulation based on SADP-compliant routing guidelines, and achieve routing and layout decomposition simultaneously. In the case that limited routing perturbation is allowed, we propose a post-routing flow based on lithography simulation and lithography-aware design rules. Both routing methods, one in detailed routing stage and one in post routing stage, reduce DPL conflicts/violations significantly with negligible wire length impact. In the layout decomposition stage, layout modification is restricted and thus the manufacturability is even harder to guaranteed. By taking the advantage of complementary lithography, we present a new layout decomposition approach with e-beam cutting, which optimizes SADP overlay error and e-beam lithography throughput simultaneously. After the mask layout is defined, optical proximity correction (OPC) is one of the resolution enhancement techniques that is commonly required to compensate the image distortion from the lithography process. We propose an inverse lithography technique to solve the OPC problem considering design target and process window co-optimization. Our mask optimization is pixel based and thus can enable better contour fidelity. In the final physical verification stage, a complex and time-consuming lithography simulation needs to be performed to identify faulty patterns. We provide a classification method based on support vector machine and principle component analysis that detects lithographic hotspots efficiently and accurately.Electrical and Computer Engineerin
Recommended from our members
Standard cell optimization and physical design in advanced technology nodes
Integrated circuits (ICs) are at the heart of modern electronics, which rely heavily on the state-of-the-art semiconductor manufacturing technology. The key to pushing forward semiconductor technology is IC feature-size miniaturization. However, this brings ever-increasing design complexities and manufacturing challenges to the $340 billion semiconductor industry. The manufacturing of two-dimensional layout on high-density metal layers depends on complex design-for-manufacturing techniques and sophisticated empirical optimizations, which introduces huge amounts of turnaround time and yield loss in advanced technology nodes. Our study reveals that unidirectional layout design can significantly reduce the manufacturing complexities and improve the yield, which is becoming increasingly adopted in semiconductor industry [61, 89]. The lithography printing of unidirectional layout can be tightly controlled using advanced patterning techniques, such as self-aligned double and quadruple patterning. Despite the manufacturing benefits, unidirectional layout leads to more restrictive solution space and brings significant impacts on the IC design automation ow for routing closure. Notably, unidirectional routing limits the standard cell pin accessibility, which further exacerbates the resource competitions during routing. Moreover, for post-routing optimization, traditional redundant-via insertion has become obsolete under unidirectional routing style, which makes the yield enhancement task extremely challenging. Regardless of complex multiple patterning and design-for-manufacturing approaches, mask optimization through resolution enhancement techniques remains as the key strategy to improve the yield of the semiconductor manufacturing processes. Among them, Sub-Resolution Assist Feature (SRAF) generation is a very important method to improve lithographic process windows. Model-based SRAF generation has been widely used to achieve high accuracy but it is time-consuming and hard to obtain consistent SRAFs. This dissertation proposes novel CAD algorithms and methodologies for standard cell optimization and physical design in advanced technology nodes, which ultimately reduces the design cycle and manufacturing cost of IC design. First, a standard cell pin access optimization engine is proposed to evaluate the pin accessibility of a given standard cell library. We further propose novel pin access planning techniques and concurrent pin access optimizations to efficiently resolve the routing resource competitions, which generates much better routing solutions than state-of-the-art, manufacturing-friendly routers. To systematically improve the manufacturing yield in the post-routing stage, a global optimization engine has been introduced for redundant local-loop insertion considering advanced manufacturing constraints. Finally, we propose the first machine learning-based framework for fast yet consistent SRAF generation with the high quality of results.Electrical and Computer Engineerin
- …