Spare capacity allocation using shared backup path protection for dual link failures

This paper extends the spare capacity allocation (SCA) problem from single link failure [1] to dual link failures on mesh-like IP or WDM networks. The SCA problem pre-plans traffic flows with mutually disjoint one working and two backup paths using the shared backup path protection (SBPP) scheme. The aggregated spare provision matrix (SPM) is used to capture the spare capacity sharing for dual link failures. Comparing to a previous work by He and Somani [2], this method has better scalability and flexibility. The SCA problem is formulated in a non-linear integer programming model and partitioned into two sequential linear sub-models: one finds all primary backup paths first, and the other finds all secondary backup paths next. The results on five networks show that the network redundancy using dedicated 1+1+1 is in the range of 313-400%. It drops to 96-181% in 1:1:1 without loss of dual-link resiliency, but with the trade-off of using the complicated share capacity sharing among backup paths. The hybrid 1+1:1 provides intermediate redundancy ratio at 187-310% with a moderate complexity. We also compare the passive/active approaches which consider spare capacity sharing after/during the backup path routing process. The active sharing approaches always achieve lower redundancy values than the passive ones. These reduction percentages are about 12% for 1+1:1 and 25% for 1:1:1 respectively

Evaluating dual-failure restorability in mesh-restorable WDM optical networks

Double link failure models, in which any two links in the network fail in an arbitrary order, are becoming critical in survivable optical network design. A significant finding is that designs offering complete dual-failure restorability require almost triple the amount of spare capacity. In this paper, networks are designed to achieve 100% restorability under single link failures, while maximizing coverage against any second link failure in the network. In the event of a single link failure, the restoration model attempts to dynamically find a second alternate link-disjoint end-to-end path to provide coverage against a sequential overlapping link failure. Sub-graph routing (M. T. Frederick et al., Feb. 2003) is extended to provide dual-failure restorability for a network provisioned to tolerate all single-link failures. This strategy is compared with shared-mesh protection. The results indicate that sub-graph routing can achieve overlapping second link failure restorability for 95-99% of connections. It is also observed that sub-graph routing can inherently provide complete dual-failure coverage for ~72-81% of the connections

Survivability issues in WDM optical networks

WDM optical networks make it possible for the bandwidth of transport networks to reach a level on which any failures would cause tremendous data loss and affect a lot of users. Thus, survivability issues of WDM optical networks have attracted a lot of research work. Within the scope of this dissertation, two categories of problems are studied, one is survivable mapping from IP topology to WDM topology, the other is p-cycle protection schemes in WDM networks.;Survivable mapping problem can be described as routing IP links on the WDM topology such that the IP topology stays connected under any single link failure in the WDM topology. This problem has been proved to be NP-complete [1]. At first, this dissertation provides a heuristic algorithm to compute approximated solutions for input IP/WDM topologies as an approach to ease the hardness of it. Then, it examines the problem with a different view, to augment the IP topology so that a survivable mapping can be easily computed. This new perspective leads to an extended survivable mapping problem that is originally proposed and analyzed in this dissertation. In addition, this dissertation also presents some interesting open problems for the survivable mapping problem as future work.;Various protection schemes in WDM networks have been explored. This dissertation focuses on methods based on the p-cycle technology. p-Cycle protection inherits the merit of fast restoration from the link-based protection technology while yielding higher efficiency on spare capacity usage [2]. In this dissertation, we first propose an efficient heuristic algorithm that generates a small subset of candidate cycles that guarantee 100% restorability and help to achieve an efficient design. Then, we adapt p-cycle design to accommodate the protection of the failure of a shared risk link group (SRLG). At last, we discuss the problem of establishing survivable connections for dynamic traffic demands using flow p-cycle

Sub-graph routing : a novel fault-tolerant architecture for shared-risk link group failures in WDM optical networks

Failure resilience is one the desired features of the Internet. Multiple link failure models, in the form of shared-risk link group (SRLG) failures, are becoming critical in survivable optical network design. Most of the traditional restoration schemes are based on the single-failure assumption which is unrealistic. In our research, we propose a novel survivability approach that can tolerate multiple failures arising out of SRLG situations. Each network has a set of sub-graphs that can be created by removing each of the links in the network and, in addition, removing all of the links of a SRLG. Connections in the newly proposed strategy are accepted if they can be routed in all the sub-graphs, and are protected against all single link and SRLG failures. We also study how restorability can be achieved for node failures and analyze the performance of our approaches for different network topologies. Our proposed restoration architecture requires the storage of network state information corresponding to each of the possible failure scenarios defined by the subgraphs. This restoration model is novel and can be implemented in current WDM backbone networks

Optimization Methods for Optical Long-Haul and Access Networks

Optical communications based on fiber optics and the associated technologies have seen remarkable progress over the past two decades. Widespread deployment of optical fiber has been witnessed in backbone and metro networks as well as access segments connecting to customer premises and homes. Designing and developing a reliable, robust and efficient end-to-end optical communication system have thus emerged as topics of utmost importance both to researchers and network operators. To fulfill these requirements, various problems have surfaced and received attention, such as network planning, capacity placement, traffic grooming, traffic scheduling, and bandwidth allocation. The optimal network design aims at addressing (one or more of) these problems based on some optimization objectives. In this thesis, we consider two of the most important problems in optical networks; namely the survivability in optical long-haul networks and the problem of bandwidth allocation and scheduling in optical access networks. For the former, we present efficient and accurate models for availability-aware design and service provisioning in p-cycle based survivable networks. We also derive optimization models for survivable network design based on p-trail, a more general protection structure, and compare its performance with p-cycles. Indeed, major cost savings can be obtained when the optical access and long-haul subnetworks become closer to each other by means of consolidation of access and metro networks. As this distance between long-haul and access networks reduces, and the need and expectations from passive optical access networks (PONs) soar, it becomes crucial to efficiently manage bandwidth in the access while providing the desired level of service availability in the long-haul backbone. We therefore address in this thesis the problem of bandwidth management and scheduling in passive optical networks; we design efficient joint and non-joint scheduling and bandwidth allocation methods for multichannel PON as well as next generation 10Gbps Ethernet PON (10G-EPON) while addressing the problem of coexistence between 10G-EPONs and multichannel PONs

Survivable design in WDM mesh networks

This dissertation addresses several important survivable design issues in WDM mesh networks;Shared backup path protection has been shown to be efficient in terms of capacity utilization, due to the sharing of backup capacity. However, sharing of backup capacity also complicates the restoration process, and leads to slow recovery. The p-cycle scheme is the most efficient ring-type protection method in terms of capacity utilization. Recently, the concept of pre-cross-connected protection was proposed to increase the recovery speed of shared path protection. We overview these protection methods. The recovery time of these schemes are compared analytically. We formulate integer programming optimization problems for three protection methods in static traffic scenario, considering wavelength continuity constraint;We develop a p-cycle based scheme to deal with dynamic traffic in WDM networks. We use a two-step approach. In first step, we find a set of p-cycles to cover the network and reserve enough capacity in p-cycles. In second step, we route the requests as they randomly arrive one by one. We propose two routing algorithms. Compared to the shared path protection, the p-cycle based design has the advantage of fast recovery, less control signaling, less dynamic state information to be maintained. To evaluate the blocking performance of proposed method, we compare it with shared backup path protection by extensive simulations;We propose a path-based protection method for two-link failures in mesh optical networks. We identify the scenarios where the backup paths can share their wavelengths without violating 100% restoration guarantee (backup multiplexing). We use integer linear programming to optimize the total capacity requirement for both dedicated- and shared-path protection schemes;The recently proposed light trail architecture offers a promising candidate for carrying IP centric traffic over optical networks. The survivable design is a critical part of the integral process of network design and operation. We propose and compare two protection schemes. The survivable light trail design problem using connection based protection model is solved using a two-step approach. (Abstract shortened by UMI.

Multiple Failure Survivability in WDM Mesh Networks

Coordinated Science Laboratory was formerly known as Control Systems LaboratoryNational Science Foundation (NSF) / ANI 01-21662 ITR and ACI 99-84492 CAREE

Survivable mesh-network design & optimization to support multiple QoP service classes

Every second, vast amounts of data are transferred over communication systems around the world, and as a result, the demands on optical infrastructures are extending beyond the traditional, ring-based architecture. The range of content and services available from the Internet is increasing, and network operations are constantly under pressure to expand their optical networks in order to keep pace with the ever increasing demand for higher speed and more reliable links

Differentiated quality-of-recovery and quality-of-protection in survivable WDM mesh networks

In the modern telecommunication business, there is a need to provide different Quality-of-Recovery (QoR) and Quality-of-Protection (QoP) classes in order to accommodate as many customers as possible, and to optimize the protection capacity cost. Prevalent protection methods to provide specific QoS related to protection are based on pre-defined shape protection structures (topologies), e.g., p -cycles and p -trees. Although some of these protection patterns are known to provide a good trade-off among the different protection parameters, their shapes can limit their deployment in some specific network conditions, e.g., a constrained link spare capacity budget and traffic distribution. In this thesis, we propose to re-think the design process of protection schemes in survivable WDM networks by adopting a hew design approach where the shapes of the protection structures are decided based on the targeted QoR and QoP guarantees, and not the reverse. We focus on the degree of pre-configuration of the protection topologies, and use fully and partially pre-cross connected p -structures, and dynamically cross connected p -structures. In QoR differentiation, we develop different approaches for pre-configuring the protection capacity in order to strike different balances between the protection cost and the availability requirements in the network; while in the QoP differentiation, we focus on the shaping of the protection structures to provide different grades of protection including single and dual-link failure protection. The new research directions proposed and developed in this thesis are intended to help network operators to effectively support different Quality-of-Recovery and Quality-of-Protection classes. All new ideas have been translated into mathematical models for which we propose practical and efficient design methods in order to optimize the inherent cost to the different designs of protection schemes. Furthermore, we establish a quantitative relation between the degree of pre-configuration of the protection structures and their costs in terms of protection capacity. Our most significant contributions are the design and development of Pre-Configured Protection Structure (p-structure) and Pre-Configured Protection Extended-Tree (p -etree) based schemes. Thanks to the column generation modeling and solution approaches, we propose a new design approach of protection schemes where we deploy just enough protection to provide different quality of recovery and protection classe