251 research outputs found
Differential encoding techniques applied to speech signals
The increasing use of digital communication systems has
produced a continuous search for efficient methods of speech
encoding.
This thesis describes investigations of novel differential
encoding systems. Initially Linear First Order DPCM systems
employing a simple delayed encoding algorithm are examined.
The systems detect an overload condition in the encoder, and
through a simple algorithm reduce the overload noise at the
expense of some increase in the quantization (granular) noise.
The signal-to-noise ratio (snr) performance of such d codec has
1 to 2 dB's advantage compared to the First Order Linear DPCM
system.
In order to obtain a large improvement in snr the high
correlation between successive pitch periods as well as the
correlation between successive samples in the voiced speech
waveform is exploited. A system called "Pitch Synchronous
First Order DPCM" (PSFOD) has been developed. Here the difference
Sequence formed between the samples of the input sequence in the
current pitch period and the samples of the stored decoded
sequence from the previous pitch period are encoded. This
difference sequence has a smaller dynamic range than the original
input speech sequence enabling a quantizer with better resolution
to be used for the same transmission bit rate. The snr is increased
by 6 dB compared with the peak snr of a First Order DPCM codea.
A development of the PSFOD system called a Pitch Synchronous
Differential Predictive Encoding system (PSDPE) is next investigated.
The principle of its operation is to predict the next sample in
the voiced-speech waveform, and form the prediction error which
is then subtracted from the corresponding decoded prediction
error in the previous pitch period. The difference is then
encoded and transmitted. The improvement in snr is approximately
8 dB compared to an ADPCM codea, when the PSDPE system uses an
adaptive PCM encoder. The snr of the system increases further
when the efficiency of the predictors used improve. However,
the performance of a predictor in any differential system is
closely related to the quantizer used. The better the quantization
the more information is available to the predictor and the better
the prediction of the incoming speech samples. This leads
automatically to the investigation in techniques of efficient
quantization. A novel adaptive quantization technique called
Dynamic Ratio quantizer (DRQ) is then considered and its theory
presented. The quantizer uses an adaptive non-linear element
which transforms the input samples of any amplitude to samples
within a defined amplitude range. A fixed uniform quantizer
quantizes the transformed signal. The snr for this quantizer
is almost constant over a range of input power limited in practice
by the dynamia range of the adaptive non-linear element, and it
is 2 to 3 dB's better than the snr of a One Word Memory adaptive
quantizer.
Digital computer simulation techniques have been used widely
in the above investigations and provide the necessary experimental
flexibility. Their use is described in the text
Time and frequency domain algorithms for speech coding
The promise of digital hardware economies (due to recent advances in
VLSI technology), has focussed much attention on more complex and sophisticated
speech coding algorithms which offer improved quality at relatively
low bit rates.
This thesis describes the results (obtained from computer simulations)
of research into various efficient (time and frequency domain) speech
encoders operating at a transmission bit rate of 16 Kbps.
In the time domain, Adaptive Differential Pulse Code Modulation (ADPCM)
systems employing both forward and backward adaptive prediction were
examined. A number of algorithms were proposed and evaluated, including
several variants of the Stochastic Approximation Predictor (SAP). A
Backward Block Adaptive (BBA) predictor was also developed and found to
outperform the conventional stochastic methods, even though its complexity
in terms of signal processing requirements is lower. A simplified
Adaptive Predictive Coder (APC) employing a single tap pitch predictor
considered next provided a slight improvement in performance over ADPCM,
but with rather greater complexity.
The ultimate test of any speech coding system is the perceptual performance
of the received speech. Recent research has indicated that this
may be enhanced by suitable control of the noise spectrum according to
the theory of auditory masking. Various noise shaping ADPCM
configurations were examined, and it was demonstrated that a proposed
pre-/post-filtering arrangement which exploits advantageously the
predictor-quantizer interaction, leads to the best subjective
performance in both forward and backward prediction systems.
Adaptive quantization is instrumental to the performance of ADPCM systems.
Both the forward adaptive quantizer (AQF) and the backward oneword
memory adaptation (AQJ) were examined. In addition, a novel method
of decreasing quantization noise in ADPCM-AQJ coders, which involves the
application of correction to the decoded speech samples, provided
reduced output noise across the spectrum, with considerable high frequency
noise suppression.
More powerful (and inevitably more complex) frequency domain speech
coders such as the Adaptive Transform Coder (ATC) and the Sub-band Coder
(SBC) offer good quality speech at 16 Kbps. To reduce complexity and
coding delay, whilst retaining the advantage of sub-band coding, a novel
transform based split-band coder (TSBC) was developed and found to compare
closely in performance with the SBC.
To prevent the heavy side information requirement associated with a
large number of bands in split-band coding schemes from impairing coding
accuracy, without forgoing the efficiency provided by adaptive bit
allocation, a method employing AQJs to code the sub-band signals together
with vector quantization of the bit allocation patterns was also
proposed.
Finally, 'pipeline' methods of bit allocation and step size estimation
(using the Fast Fourier Transform (FFT) on the input signal) were examined.
Such methods, although less accurate, are nevertheless useful in
limiting coding delay associated with SRC schemes employing Quadrature
Mirror Filters (QMF)
Study and simulation of low rate video coding schemes
The semiannual report is included. Topics covered include communication, information science, data compression, remote sensing, color mapped images, robust coding scheme for packet video, recursively indexed differential pulse code modulation, image compression technique for use on token ring networks, and joint source/channel coder design
New Directions in Subband Coding
Two very different subband coders are described. The first is a modified dynamic bit-allocation-subband coder (D-SBC) designed for variable rate coding situations and easily adaptable to noisy channel environments. It can operate at rates as low as 12 kb/s and still give good quality speech. The second coder is a 16-kb/s waveform coder, based on a combination of subband coding and vector quantization (VQ-SBC). The key feature of this coder is its short coding delay, which makes it suitable for real-time communication networks. The speech quality of both coders has been enhanced by adaptive postfiltering. The coders have been implemented on a single AT&T DSP32 signal processo
A 32 sub-band/transform coder incorporating vector quantizing for adaptive bit allocation
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1983.MICROFICHE COPY AVAILABLE IN ARCHIVES AND ENGINEERINGVita.Includes bibliographical references.by Courtney D. Heron.M.S
Speech coding at medium bit rates using analysis by synthesis techniques
Speech coding at medium bit rates using analysis by synthesis technique
Low-complexity video coding for receiver-driven layered multicast
In recent years, the “Internet Multicast Backbone,” or MBone, has risen from a small, research curiosity to a large- scale and widely used communications infrastructure. A driving force behind this growth was the development of multipoint audio, video, and shared whiteboard conferencing applications. Because these real-time media are transmitted at a uniform rate to all of the receivers in the network, a source must either run at the bottleneck rate or overload portions of its multicast distribution tree. We overcome this limitation by moving the burden of rate adaptation from the source to the receivers with a scheme we call receiver-driven layered multicast, or RLM. In RLM, a source distributes a hierarchical signal by striping the different layers across multiple multicast groups, and receivers adjust their reception rate by simply joining and leaving multicast groups. In this paper, we describe a layered video compression algorithm which, when combined with RLM, provides a comprehensive solution for scalable multicast video transmission in heterogeneous networks. In addition to a layered representation, our coder has low complexity (admitting an effi- cient software implementation) and high loss resilience (admitting robust operation in loosely controlled environments like the Inter- net). Even with these constraints, our hybrid DCT/wavelet-based coder exhibits good compression performance. It outperforms all publicly available Internet video codecs while maintaining comparable run-time performance. We have implemented our coder in a “real” application—the UCB/LBL videoconferencing tool vic. Unlike previous work on layered video compression and transmission, we have built a fully operational system that is currently being deployed on a very large scale over the MBone
- …