Self-organisation in ant-based peer-to-peer systems

Peer-to-peer systems are a highly decentralised form of distributed computing, which has ad¬ vantages of robustness and redundancy over more centralised systems. When the peer-to-peer system has a stable and static population of nodes, variations and bursts in traffic levels cause momentary levels of congestion in the system, which have to be dealt with by routing policies implemented within the peer-to-peer system in order to maintain efficient and effective routes.Peer-to-peer systems, however, are dynamic in nature, as they exhibit churn, i.e. nodes enter and leave the system during their use. This dynamic nature makes it difficult to identify consistent routing policies that ensure a reasonable proportion of traffic in the system is routed successfully to its destination. Studies have shown that chum in peer-to-peer systems is difficult to model and characterise, and further, is difficult to manage.The task of creating and maintaining efficient routes and network topologies in dynamic environments, such as those described above, is one of dynamic optimisation. Complex adap¬ tive systems such as ant colony optimisation and genetic algorithms have been shown to display adaptive properties in dynamic environments. Although complex adaptive systems have been applied to a small number of dynamic optimisation problems, their application to dynamic opti¬ misation problems is new in general and also application to routing in dynamic environments is new. Further, the problem characteristics and conditions under which these algorithms perform well, and the reasons for doing so, are not yet fully understood. The assessment of how good the complex adaptive systems are at creating solutions to the dynamic routing optimisation problem detailed above is dependent on the metrics used to make the measurements.A contribution of this thesis is the development of a theoretical framework within which we can analyse the behaviours and responses of any peer-to-peer system. We do this by considering a peer-to-peer system to be a graph generating algorithm, which has input parameters and has outputs which can be measured using topological metrics and statistics that characterise the traffic through the network. Specifically, we consider the behaviour of an ant-based peer-to-peer system and we have designed and implemented an ant-based peer-to-peer simulator to enable this.Recently methods for characterising graphs by their scaling properties have been developed and a small number of distinct categories of graphs have been identified (such as random graphs, lattices, small world graphs, and scale-free graphs). These graph characterisation methods have also enabled the creation of new metrics to enable measurements of properties of the graphs belonging to different categories.We use these new graph characterisation techniques mentioned above and the associated metrics to implement a systematic approach to the analysis of the behaviour of our ant peer-to-peer system. We present the results of a number of simulation runs of our system initiated with a range of values of key parameters. The resulting networks are then analysed from both the point of view of traffic statistics, and also topological metrics.Three sets of experiments have been designed and conducted using the simulator created during this project. The first set, equilibrium experiments, consider the behaviour of the system when the number of operational nodes in the system is constant and also the demand placed on the system is constant. The second set of experiments considers the changes that occur when there are bursts in traffic levels or the demand placed on the system. The final set considers the effect of churn in the system, where nodes enter and leave the system during its operation. In crafting the experiments we have been able to identify many of the major control parameters of the ant-based peer-to-peer system.A further contribution of this thesis is the results of the experiments which show that under conditions of network congestion the ant peer-to-peer system becomes very brittle. This is characterised by small average path lengths, a low proportion of ants successfully getting through to their destination node, and also a low average degree of the nodes in the network. This brittleness is made worse when nodes fail and also when the demand applied to the system changes abruptly.A further contribution of this thesis is the creation of a method of ranking the topology of a network with respect to a target topology. This method can be used as the basis for topological control (i.e. the distributed self-assembly of network topologies within a peer-to-peer system that have desired topological properties) and assessing how best to modify a topology in order to move it closer to the desired (or reference) topology. We use this method when measuring the outcome of our experiments to determine how far the resulting graph is from a random graph. In principle this method could be used to measure the distance of the graph of the peer-to-peer network from any reference topology (e.g. a lattice or a tree).A final contribution of this thesis is the definition of a distributed routing policy which uses a measure of confidence that nodes in the system are in an operational state when making calculations regarding onward routing. The method of implementing the routing algorithm within the ant peer-to-peer system has been specified, although this has not been implemented within this thesis. It is conjectured that this algorithm would improve the performance of the ant peer-to-peer system under conditions of churn.The main question this thesis is concerned with is how the behaviour of the ant-based peer-to-peer system can best be measured using a simulation-based approach, and how these measurables can be used to control and optimise the performance of the ant-based peer-to-peer system in conditions of equilibrium, and also non-equilibrium (specifically varying levels of bursts in traffic demand, and also varying rates of nodes entering and leaving the peer-to-peer system)

QoE in Pull Based P2P-TV Systems: Overlay Topology Design Tradeoff

Abstract—This paper presents a systematic performance anal-ysis of pull P2P video streaming systems for live applications, providing guidelines for the design of the overlay topology and the chunk scheduling algorithm. The contribution of the paper is threefold: 1) we propose a realistic simulative model of the system that represents the effects of access bandwidth heterogeneity, latencies, peculiar characteristics of the video, while still guaranteeing good scalability properties; 2) we propose a new latency/bandwidth-aware overlay topology design strategy that improves application layer performance while reducing the underlying transport network stress; 3) we investigate the impact of chunk scheduling algorithms that explicitly exploit properties of encoded video. Results show that our proposal jointly improves the actual Quality of Experience of users and reduces the cost the transport network has to support. I

Internal combustion engine sensor network analysis using graph modeling

In recent years there has been a rapid development in technologies for smart monitoring applied to many different areas (e.g. building automation, photovoltaic systems, etc.). An intelligent monitoring system employs multiple sensors distributed within a network to extract useful information for decision-making. The management and the analysis of the raw data derived from the sensor network includes a number of specific challenges still unresolved, related to the different communication standards, the heterogeneous structure and the huge volume of data. In this paper we propose to apply a method based on complex network theory, to evaluate the performance of an Internal Combustion Engine. Data are gathered from the OBD sensor subset and from the emission analyzer. The method provides for the graph modeling of the sensor network, where the nodes are represented by the sensors and the edge are evaluated with non-linear statistical correlation functions applied to the time series pairs. The resulting functional graph is then analyzed with the topological metrics of the network, to define characteristic proprieties representing useful indicator for the maintenance and diagnosis

Millimetre-long transport of photogenerated carriers in topological insulators.

Excitons are spin integer particles that are predicted to condense into a coherent quantum state at sufficiently low temperature. Here by using photocurrent imaging we report experimental evidence of formation and efficient transport of non-equilibrium excitons in Bi2-xSbxSe3 nanoribbons. The photocurrent distributions are independent of electric field, indicating that photoexcited electrons and holes form excitons. Remarkably, these excitons can transport over hundreds of micrometers along the topological insulator (TI) nanoribbons before recombination at up to 40 K. The macroscopic transport distance, combined with short carrier lifetime obtained from transient photocurrent measurements, indicates an exciton diffusion coefficient at least 36 m2 s-1, which corresponds to a mobility of 6 × 104 m2 V-1 s-1 at 7 K and is four order of magnitude higher than the value reported for free carriers in TIs. The observation of highly dissipationless exciton transport implies the formation of superfluid-like exciton condensate at the surface of TIs

Chinese Internet AS-level Topology

We present the first complete measurement of the Chinese Internet topology at the autonomous systems (AS) level based on traceroute data probed from servers of major ISPs in mainland China. We show that both the Chinese Internet AS graph and the global Internet AS graph can be accurately reproduced by the Positive-Feedback Preference (PFP) model with the same parameters. This result suggests that the Chinese Internet preserves well the topological characteristics of the global Internet. This is the first demonstration of the Internet's topological fractality, or self-similarity, performed at the level of topology evolution modeling.Comment: This paper is a preprint of a paper submitted to IEE Proceedings on Communications and is subject to Institution of Engineering and Technology Copyright. If accepted, the copy of record will be available at IET Digital Librar

Beyond Node Degree: Evaluating AS Topology Models

This is the accepted version of 'Beyond Node Degree: Evaluating AS Topology Models', archived originally at arXiv:0807.2023v1 [cs.NI] 13 July 2008.Many models have been proposed to generate Internet Autonomous System (AS) topologies, most of which make structural assumptions about the AS graph. In this paper we compare AS topology generation models with several observed AS topologies. In contrast to most previous works, we avoid making assumptions about which topological properties are important to characterize the AS topology. Our analysis shows that, although matching degree-based properties, the existing AS topology generation models fail to capture the complexity of the local interconnection structure between ASs. Furthermore, we use BGP data from multiple vantage points to show that additional measurement locations significantly affect local structure properties, such as clustering and node centrality. Degree-based properties, however, are not notably affected by additional measurements locations. These observations are particularly valid in the core. The shortcomings of AS topology generation models stems from an underestimation of the complexity of the connectivity in the core caused by inappropriate use of BGP data