Maximum Average Service Rate and Optimal Queue Scheduling of Delay-Constrained Hybrid Cognitive Radio in Nakagami Fading Channels

As a promising technique to improve achievable bandwidth efficiency, cognitive radio (CR) has attracted substantial research attention from both the academic and industrial communities. To improve the performance attained by the secondary user (SU), a novel hybrid CR system is proposed, which combines the conventional interweave and underlay paradigms to enhance the chance of the SU to access the spectrum. Queuing theory is invoked in this paper to analyze the impact of the primary user’s maximum tolerable delay on the performance of the SU. Multiple queues are assumed for the SU, which is engaged in video communication. Apart from the Poisson traffic generation,we also model the classic Nakagami-m fading channel as a Poisson service process by utilizing the outage probability in the presence of cochannel interference. We optimize both the hybrid interweave/underlay procedure to maximize the average service rate μ_S,max of the SU, as well as the queue’s scheduling scheme, for the sake of minimizing the overall average delay (OAD). As a result, the OAD of the SU is reduced by up to 27% and 20%, compared with the proportion and round-robin schemes, respectively

Full-duplex wireless communications: challenges, solutions and future research directions

The family of conventional half-duplex (HD) wireless systems relied on transmitting and receiving in different time-slots or frequency sub-bands. Hence the wireless research community aspires to conceive full-duplex (FD) operation for supporting concurrent transmission and reception in a single time/frequency channel, which would improve the attainable spectral efficiency by a factor of two. The main challenge encountered in implementing an FD wireless device is the large power difference between the self-interference (SI) imposed by the device’s own transmissions and the signal of interest received from a remote source. In this survey, we present a comprehensive list of the potential FD techniques and highlight their pros and cons. We classify the SI cancellation techniques into three categories, namely passive suppression, analog cancellation and digital cancellation, with the advantages and disadvantages of each technique compared. Specifically, we analyse the main impairments (e.g. phase noise, power amplifier nonlinearity as well as in-phase and quadrature-phase (I/Q) imbalance, etc.) that degrading the SI cancellation. We then discuss the FD based Media Access Control (MAC)-layer protocol design for the sake of addressing some of the critical issues, such as the problem of hidden terminals, the resultant end-to-end delay and the high packet loss ratio (PLR) due to network congestion. After elaborating on a variety of physical/MAC-layer techniques, we discuss potential solutions conceived for meeting the challenges imposed by the aforementioned techniques. Furthermore, we also discuss a range of critical issues related to the implementation, performance enhancement and optimization of FD systems, including important topics such as hybrid FD/HD scheme, optimal relay selection and optimal power allocation, etc. Finally, a variety of new directions and open problems associated with FD technology are pointed out. Our hope is that this treatise will stimulate future research efforts in the emerging field of FD communication

ActMesh- A Cognitive Resource Management paradigm for dynamic mobile Internet Access with Reliability Guarantees

Wireless Mesh Networks (WMNs) are going increasing attention as a flexible low-cost networking architecture to provide media Internet access over metropolitan areas to mobile clients requiring multimedia services. In WMNs, Mesh Routers (MRs) from the mesh backbone and accomplish the twofold task of traffic forwarding, as well as providing multimedia access to mobile Mesh Clients (MCs). Due to the intensive bandwidth-resource requested for supporting QoS-demanding multimedia services, performance of the current WMNs is mainly limited by spectrum-crowding and traffic-congestion, as only scarce spectrum-resources is currently licensed for the MCs' access. In principle, this problem could be mitigated by exploiting in a media-friendly (e.g., content-aware) way the context-aware capabilities offered by the Cognitive Radio (CR) paradigm. As integrated exploitation of both content and context-aware system's capabilities is at the basis of our proposed Active Mesh (ActMesh) networking paradigm. This last aims at defining a network-wide architecture for realizing media-friendly Cognitive Mesh nets (e.g., context aware Cognitive Mesh nets). Hence, main contribution of this work is four fold: 1. After introducing main functional blocks of our ActMesh architecture, suitable self-adaptive Belief Propagation and Soft Data Fusion algorithms are designed to provide context-awareness. This is done under both cooperative and noncooperative sensing frameworks. 2. The resulting network-wide resource management problem is modelled as a constrained stochastic Network Utility Maximization (NUM) problem, with the dual (contrasting) objective to maximize spectrum efficiency at the network level, while accounting for the perceived quality of the delivered media flows at the client level. 3. A fully distributed, scalable and self-adaptive implementation of the resulting Active Resource Manager (ARM) is deployed, that explicitly accounts for the energy limits of the battery powered MCs and the effects induced by both fading and client mobility. Due to informationally decentralized architecture of the ActMesh net, the complexity of (possibly, optimal) centralized solutions for resource management becomes prohibitive when number of MCs accessing ActMesh net grow. Furthermore, centralized resource management solutions could required large amounts of time to collect and process the required network information, which, in turn, induce delay that can be unacceptable for delay sensitive media applications, e.g., multimedia streaming. Hence, it is important to develop network-wide ARM policies that are both distributed and scalable by exploiting the radio MCs capabilities to sense, adapt and coordinate themselves. We validate our analytical models via simulation based numerical tests, that support actual effectiveness of the overall ActMesh paradigm, both in terms of objective and subjective performance metrics. In particular, the basic tradeoff among backbone traffic-vs-access traffic arising in the ActMesh net from the bandwidth-efficient opportunistic resource allocation policy pursued by the deployed ARM is numerically characterized. The standardization framework we inspire to is the emerging IEEE 802.16h one

ActMesh- A Cognitive Resource Management paradigm for dynamic mobile Internet Access with Reliability Guarantees

Wireless Mesh Networks (WMNs) are going increasing attention as a flexible low-cost networking architecture to provide media Internet access over metropolitan areas to mobile clients requiring multimedia services. In WMNs, Mesh Routers (MRs) from the mesh backbone and accomplish the twofold task of traffic forwarding, as well as providing multimedia access to mobile Mesh Clients (MCs). Due to the intensive bandwidth-resource requested for supporting QoS-demanding multimedia services, performance of the current WMNs is mainly limited by spectrum-crowding and traffic-congestion, as only scarce spectrum-resources is currently licensed for the MCs' access. In principle, this problem could be mitigated by exploiting in a media-friendly (e.g., content-aware) way the context-aware capabilities offered by the Cognitive Radio (CR) paradigm. As integrated exploitation of both content and context-aware system's capabilities is at the basis of our proposed Active Mesh (ActMesh) networking paradigm. This last aims at defining a network-wide architecture for realizing media-friendly Cognitive Mesh nets (e.g., context aware Cognitive Mesh nets). Hence, main contribution of this work is four fold: 1. After introducing main functional blocks of our ActMesh architecture, suitable self-adaptive Belief Propagation and Soft Data Fusion algorithms are designed to provide context-awareness. This is done under both cooperative and noncooperative sensing frameworks. 2. The resulting network-wide resource management problem is modelled as a constrained stochastic Network Utility Maximization (NUM) problem, with the dual (contrasting) objective to maximize spectrum efficiency at the network level, while accounting for the perceived quality of the delivered media flows at the client level. 3. A fully distributed, scalable and self-adaptive implementation of the resulting Active Resource Manager (ARM) is deployed, that explicitly accounts for the energy limits of the battery powered MCs and the effects induced by both fading and client mobility. Due to informationally decentralized architecture of the ActMesh net, the complexity of (possibly, optimal) centralized solutions for resource management becomes prohibitive when number of MCs accessing ActMesh net grow. Furthermore, centralized resource management solutions could required large amounts of time to collect and process the required network information, which, in turn, induce delay that can be unacceptable for delay sensitive media applications, e.g., multimedia streaming. Hence, it is important to develop network-wide ARM policies that are both distributed and scalable by exploiting the radio MCs capabilities to sense, adapt and coordinate themselves. We validate our analytical models via simulation based numerical tests, that support actual effectiveness of the overall ActMesh paradigm, both in terms of objective and subjective performance metrics. In particular, the basic tradeoff among backbone traffic-vs-access traffic arising in the ActMesh net from the bandwidth-efficient opportunistic resource allocation policy pursued by the deployed ARM is numerically characterized. The standardization framework we inspire to is the emerging IEEE 802.16h one

Statistical Performance Evaluation for Energy Harvesting Communications based on Large Deviation Theorem

Energy harvesting (EH) is a promising technology for enhancing a network’s quality of service (QoS). EH-based communication systems are studied by tackling the challenges of energy-outage probability and energy conditioning. These issues motivate this research to develop new solutions for increasing the lifetime of device batteries by leveraging renewable energy sources available in the surrounding environment, for instance, from solar and radio-frequency (RF) energy through harvesting. This dissertation studies an energy outage problem and user QoS requirements for energy harvesting communications. In the first part of this dissertation, the performance of an energy harvesting communication link is analysed by allowing a certain level of energy-outage. In EH systems, energy consumed from the battery depends on the QoS required by the end user and on the channel state information. At the same time, the energy arrival to the battery depends on the strength of the power source, solar in this case, and is independent of the fading channel conditions and the required QoS. Due to the independence between the energy arrival into the battery and the energy consumed from there, it is challenging to estimate the exact status of the available energy in the battery. An energy outage is experienced when there is no further energy for the system to utilise for data transmission. In this part, a thorough study was carried out to analyse the required energy harvesting (EH) rate for satisfying the QoS requirements when a level of energy-outage is allowed in a point-to-point EH-based communication system equipped with a finite-sized battery. Furthermore, an expression relating the rate of the incoming energy with the fading channel conditions and the minimum required QoS of the system was provided to analyse the performance of the EH-based communication system under energy constraints. Finally, numerical results confirm the proposed mechanism’s analytical findings and correctness. In the second part of this dissertation, the performance of point-to-point communications is investigated in which the source node can harvest and store energy from RF signals and then use the harvested energy to communicate with its end destination. The continuous availability of RF energy has proved advantageous as a wireless power source to support low-power devices, making RF-based energy harvesting an alternative and viable solution for powering next-generation wireless networks, particularly for Internet-of-Things (IoT) applications. Specifically, the point-to-point RF-based energy-harvesting communication is considered, where the transmitter, which can be an IoT sensor, implements a time-switching protocol between the energy harvesting and the information transfer, and we focus on analysing the system performance while aiming to guarantee the required QoS of the end user subject to system constraint energy outage. The time-switching circuit at the source node allows the latter to switch between harvesting energy from a distant RF energy source and transmitting data to its target destination using the scavenged energy. Using a duality principle between the physical energy queue and a proposed virtual energy queue and assuming that a certain level of energy outage can be tolerated in the communication process, the system performance was evaluated with a novel analytical framework that leverages tools for the large deviation principle. In the third and last part of this dissertation, an empirical study of the RF-EH model is presented for ensuring the QoS constraints during an energy-outage for Simultaneous Wireless Information and Power Transfer (SWIPT) network. We consider a relay network over a Rayleigh fading channel where the relay lacks a permanent power source. Thus, we obtain energy from wireless energy harvesting (EH) of the source’s signals to maintain operation. This process is performed using a time-switching protocol at the relay for enhancing the quality of service (QoS) in SWIPT networks. A numerical approach is incorporated to evaluate the performance of the proposed RF-EH model in terms of different evaluation parameters such as time-switching protocol, transmit power and outage. The assumptions of the large deviation principle are satisfied using a proposed virtual energy queuing model, which is then used for the performance analysis. We established a closed-form expression for the system’s probability of experiencing an energy outage and the energy consumed by the relay battery

On Statistical QoS Provisioning for Smart Grid

Current power system is in the transition from traditional power grid to Smart Grid. A key advantage of Smart Grid is its integration of advanced communication technologies, which can provide real-time system-wide two-way information links. Since the communication system and power system are deeply coupled within the Smart Grid system, it makes Quality of Service (QoS) performance analysis much more complex than that in either system alone. In order to address this challenge, the effective rate theory is studied and extended in this thesis, where a new H transform based framework is proposed. Various scenarios are investigated using the new proposed effective rate framework, including both independent and correlated fading channels. With the effective rate as a connection between the communication system and the power system, an analysis of the power grid observability under communication constraints is performed. Case studies show that the effective rate provides a cross layer analytical framework within the communication system, while its statistical characterisation of the communication delay has the potential to be applied as a general coupling point between the communication system and the power system, especially when real-time applications are considered. Besides the theoretical QoS performance analysis within Smart Grid, a new Software Defined Smart Grid testbed is proposed in this thesis. This testbed provides a versatile evaluation and development environment for Smart Grid QoS performance studies. It exploits the Real Time Digital Simulator (RTDS) to emulate different power grid configurations and the Software Defined Radio (SDR) environment to implement the communication system. A data acquisition and actuator module is developed, which provides an emulation of various Intelligent Electronic Devices (IEDs). The implemented prototype demonstrates that the proposed testbed has the potential to evaluate real time Smart Grid applications such as real time voltage stability control