Robust MMSE Precoding Strategy for Multiuser MIMO Relay Systems with Switched Relaying and Side Information

In this work, we propose a minimum mean squared error (MMSE) robust base station (BS) precoding strategy based on switched relaying (SR) processing and limited transmission of side information for interference suppression in the downlink of multiuser multiple-input multiple-output (MIMO) relay systems. The BS and the MIMO relay station (RS) are both equipped with a codebook of interleaving matrices. For a given channel state information (CSI) the selection function at the BS chooses the optimum interleaving matrix from the codebook based on two optimization criteria to design the robust precoder. Prior to the payload transmission the BS sends the index corresponding to the selected interleaving matrix to the RS, where the best interleaving matrix is selected to build the optimum relay processing matrix. The entries of the codebook are randomly generated unitary matrices. Simulation results show that the performance of the proposed techniques is significantly better than prior art in the case of imperfect CSI.

Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey

This paper provides a comprehensive review of the domain of physical layer security in multiuser wireless networks. The essential premise of physical-layer security is to enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers without relying on higher-layer encryption. This can be achieved primarily in two ways: without the need for a secret key by intelligently designing transmit coding strategies, or by exploiting the wireless communication medium to develop secret keys over public channels. The survey begins with an overview of the foundations dating back to the pioneering work of Shannon and Wyner on information-theoretic security. We then describe the evolution of secure transmission strategies from point-to-point channels to multiple-antenna systems, followed by generalizations to multiuser broadcast, multiple-access, interference, and relay networks. Secret-key generation and establishment protocols based on physical layer mechanisms are subsequently covered. Approaches for secrecy based on channel coding design are then examined, along with a description of inter-disciplinary approaches based on game theory and stochastic geometry. The associated problem of physical-layer message authentication is also introduced briefly. The survey concludes with observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials, 201

Physical Layer Service Integration in 5G: Potentials and Challenges

High transmission rate and secure communication have been identified as the key targets that need to be effectively addressed by fifth generation (5G) wireless systems. In this context, the concept of physical-layer security becomes attractive, as it can establish perfect security using only the characteristics of wireless medium. Nonetheless, to further increase the spectral efficiency, an emerging concept, termed physical-layer service integration (PHY-SI), has been recognized as an effective means. Its basic idea is to combine multiple coexisting services, i.e., multicast/broadcast service and confidential service, into one integral service for one-time transmission at the transmitter side. This article first provides a tutorial on typical PHY-SI models. Furthermore, we propose some state-of-the-art solutions to improve the overall performance of PHY-SI in certain important communication scenarios. In particular, we highlight the extension of several concepts borrowed from conventional single-service communications, such as artificial noise (AN), eigenmode transmission etc., to the scenario of PHY-SI. These techniques are shown to be effective in the design of reliable and robust PHY-SI schemes. Finally, several potential research directions are identified for future work.Comment: 12 pages, 7 figure

Adaptive Communication for Wireless Massive MIMO Systems

The demand for high data rates in wireless communications is increasing rapidly. One way to provide reliable communication with increased rates is massive multiple-input multiple-output (MIMO) systems where a large number of antennas is deployed. We analyze three systems utilizing a large number of antennas to provide enhancement in the performance of wireless communications. First, we consider a general form of spatial modulation (SM) systems where the number of transmitted data streams is allowed to vary and we refer to it as generalized spatial modulation with multiplexing (GSMM). A Gaussian mixture model (GMM) is shown to accurately model the transmitted spatially modulated signal using a precoding framework. Using this transmit model, a general closed-form expression for the achievable rate when operating over Rayleigh fading channels is evaluated along with a tight upper and a lower bounds for the achievable rate. The obtained expressions are flexible enough to accommodate any form of SM by adjusting the precoding set. Followed by that, we study quantized distributed wireless relay networks where a relay consisting of many geographically dispersed nodes is facilitating communication between unconnected users. Due to bandwidth constraints, distributed relay networks perform quantization at the relay nodes, and hence they are referred to as quantized distributed relay networks. In such systems, users transmit their data simultaneously to the relay nodes through the uplink channel that quantize their observed signals independently to a few bits and broadcast these bits to the users through the downlink channel. We develop algorithms that can be employed by the users to estimate the uplink channels between all users and all relay nodes when the relay nodes are performing simple sign quantization. This setup is very useful in either extending coverage to unconnected regions or replacing the existing wireless infrastructure in case of disasters. Using the uplink channel estimates, we propose multiple decoders that can be deployed at the receiver side. We also study the performance of each of these decoders under different system assumptions. A different quantization framework is also proposed for quantized distributed relay networking where the relay nodes perform vector quantization instead of sign quantization. Applying vector quantization at the relay nodes enables us to propose an algorithm that allocates quantization resources efficiently among the relay nodes inside the relay network. We also study the beamforming design at the users’ side in this case where beamforming design is not trivial due to the quantization that occurs at the relay network. Finally, we study a different setup of distributed communication systems called cell-free massive MIMO. In cell-free massive MIMO, regular cellular communication is replaced by multiple access points (APs) that are placed randomly over the coverage area. All users in the coverage area are sharing time and frequency resources and all APs are serving all UEs while power allocation is done in a central processor that is connected to the APs through a high speed backhaul network. We study the power allocation in cell-free massive MIMO system where APs are equipped with few antennas and how the distribution of the available antennas among access points affects both the performance and the infrastructure cost