Area- Efficient VLSI Implementation of Serial-In Parallel-Out Multiplier Using Polynomial Representation in Finite Field GF(2m)

Finite field multiplier is mainly used in elliptic curve cryptography, error-correcting codes and signal processing. Finite field multiplier is regarded as the bottleneck arithmetic unit for such applications and it is the most complicated operation over finite field GF(2m) which requires a huge amount of logic resources. In this paper, a new modified serial-in parallel-out multiplication algorithm with interleaved modular reduction is suggested. The proposed method offers efficient area architecture as compared to proposed algorithms in the literature. The reduced finite field multiplier complexity is achieved by means of utilizing logic NAND gate in a particular architecture. The efficiency of the proposed architecture is evaluated based on criteria such as time (latency, critical path) and space (gate-latch number) complexity. A detailed comparative analysis indicates that, the proposed finite field multiplier based on logic NAND gate outperforms previously known resultsComment: 19 pages, 4 figure

A VLSI synthesis of a Reed-Solomon processor for digital communication systems

The Reed-Solomon codes have been widely used in digital communication systems such as computer networks, satellites, VCRs, mobile communications and high- definition television (HDTV), in order to protect digital data against erasures, random and burst errors during transmission. Since the encoding and decoding algorithms for such codes are computationally intensive, special purpose hardware implementations are often required to meet the real time requirements. -- One motivation for this thesis is to investigate and introduce reconfigurable Galois field arithmetic structures which exploit the symmetric properties of available architectures. Another is to design and implement an RS encoder/decoder ASIC which can support a wide family of RS codes. -- An m-programmable Galois field multiplier which uses the standard basis representation of the elements is first introduced. It is then demonstrated that the exponentiator can be used to implement a fast inverter which outperforms the available inverters in GF(2m). Using these basic structures, an ASIC design and synthesis of a reconfigurable Reed-Solomon encoder/decoder processor which implements a large family of RS codes is proposed. The design is parameterized in terms of the block length n, Galois field symbol size m, and error correction capability t for the various RS codes. The design has been captured using the VHDL hardware description language and mapped onto CMOS standard cells available in the 0.8-µm BiCMOS design kits for Cadence and Synopsys tools. The experimental chip contains 218,206 logic gates and supports values of the Galois field symbol size m = 3,4,5,6,7,8 and error correction capability t = 1,2,3, ..., 16. Thus, the block length n is variable from 7 to 255. Error correction t and Galois field symbol size m are pin-selectable. -- Since low design complexity and high throughput are desired in the VLSI chip, the algebraic decoding technique has been investigated instead of the time or transform domain. The encoder uses a self-reciprocal generator polynomial which structures the codewords in a systematic form. At the beginning of the decoding process, received words are initially stored in the first-in-first-out (FIFO) buffer as they enter the syndrome module. The Berlekemp-Massey algorithm is used to determine both the error locator and error evaluator polynomials. The Chien Search and Forney's algorithms operate sequentially to solve for the error locations and error values respectively. The error values are exclusive or-ed with the buffered messages in order to correct the errors, as the processed data leave the chip

Reconfigurable elliptic curve cryptography

Elliptic Curve Cryptosystems (ECC) have been proposed as an alternative to other established public key cryptosystems such as RSA (Rivest Shamir Adleman). ECC provide more security per bit than other known public key schemes based on the discrete logarithm problem. Smaller key sizes result in faster computations, lower power consumption and memory and bandwidth savings, thus making ECC a fast, flexible and cost-effective solution for providing security in constrained environments. Implementing ECC on reconfigurable platform combines the speed, security and concurrency of hardware along with the flexibility of the software approach. This work proposes a generic architecture for elliptic curve cryptosystem on a Field Programmable Gate Array (FPGA) that performs an elliptic curve scalar multiplication in 1.16milliseconds for GF (2163), which is considerably faster than most other documented implementations. One of the benefits of the proposed processor architecture is that it is easily reprogrammable to use different algorithms and is adaptable to any field order. Also through reconfiguration the arithmetic unit can be optimized for different area/speed requirements. The mathematics involved uses binary extension field of the form GF (2n) as the underlying field and polynomial basis for the representation of the elements in the field. A significant gain in performance is obtained by using projective coordinates for the points on the curve during the computation process

A survey of hardware implementations of elliptic curve cryptographic systems

Elliptic Curve Cryptography (ECC) has gained much recognition over the last decades and has established itself among the well known public-key cryptography schemes, not least due its smaller key size and relatively lower computational effort compared to RSA. The wide employment of Elliptic Curve Cryptography in many different application areas has been leading to a variety of implementation types and domains ranging from pure software approaches over hardware implemenations to hardware/software co-designs. The following review provides an overview of state of the art hardware implemenations of ECC, specifically in regard to their targeted design goals. In this context the suitability of the hardware/software approach in regard to the security challenges opposed by the low-end embedded devices of the Internet of Things is briefly examined. The paper also outlines ECC’s vulnerability against quantum attacks and references one possible solution to that problem

High-speed VLSI implementation of Digit-serial Gaussian normal basis Multiplication over GF(2m)

In this paper, by employing the logical effort technique an efficient and high-speed VLSI implementation of the digit-serial Gaussian normal basis multiplier is presented. It is constructed by using AND, XOR and XOR tree components. To have a low-cost implementation with low number of transistors, the block of AND gates are implemented by using NAND gates based on the property of the XOR gates in the XOR tree. To optimally decrease the delay and increase the drive ability of the circuit the logical effort method as an efficient method for sizing the transistors is employed. By using this method and also a 4-input XOR gate structure, the circuit is designed for minimum delay. The digit-serial Gaussian normal basis multiplier is implemented over two binary finite fields GF(2163) and GF(2233) in 0.18μm CMOS technology for three different digit sizes. The results show that the proposed structures, compared to previous structures, have been improved in terms of delay and area parameters

Versatile Montgomery Multiplier Architectures

Several algorithms for Public Key Cryptography (PKC), such as RSA, Diffie-Hellman, and Elliptic Curve Cryptography, require modular multiplication of very large operands (sizes from 160 to 4096 bits) as their core arithmetic operation. To perform this operation reasonably fast, general purpose processors are not always the best choice. This is why specialized hardware, in the form of cryptographic co-processors, become more attractive. Based upon the analysis of recent publications on hardware design for modular multiplication, this M.S. thesis presents a new architecture that is scalable with respect to word size and pipelining depth. To our knowledge, this is the first time a word based algorithm for Montgomery\u27s method is realized using high-radix bit-parallel multipliers working with two different types of finite fields (unified architecture for GF(p) and GF(2n)). Previous approaches have relied mostly on bit serial multiplication in combination with massive pipelining, or Radix-8 multiplication with the limitation to a single type of finite field. Our approach is centered around the notion that the optimal delay in bit-parallel multipliers grows with logarithmic complexity with respect to the operand size n, O(log3/2 n), while the delay of bit serial implementations grows with linear complexity O(n). Our design has been implemented in VHDL, simulated and synthesized in 0.5μ CMOS technology. The synthesized net list has been verified in back-annotated timing simulations and analyzed in terms of performance and area consumption

Hardware Architectures for Post-Quantum Cryptography

The rapid development of quantum computers poses severe threats to many commonly-used cryptographic algorithms that are embedded in different hardware devices to ensure the security and privacy of data and communication. Seeking for new solutions that are potentially resistant against attacks from quantum computers, a new research field called Post-Quantum Cryptography (PQC) has emerged, that is, cryptosystems deployed in classical computers conjectured to be secure against attacks utilizing large-scale quantum computers. In order to secure data during storage or communication, and many other applications in the future, this dissertation focuses on the design, implementation, and evaluation of efficient PQC schemes in hardware. Four PQC algorithms, each from a different family, are studied in this dissertation. The first hardware architecture presented in this dissertation is focused on the code-based scheme Classic McEliece. The research presented in this dissertation is the first that builds the hardware architecture for the Classic McEliece cryptosystem. This research successfully demonstrated that complex code-based PQC algorithm can be run efficiently on hardware. Furthermore, this dissertation shows that implementation of this scheme on hardware can be easily tuned to different configurations by implementing support for flexible choices of security parameters as well as configurable hardware performance parameters. The successful prototype of the Classic McEliece scheme on hardware increased confidence in this scheme, and helped Classic McEliece to get recognized as one of seven finalists in the third round of the NIST PQC standardization process. While Classic McEliece serves as a ready-to-use candidate for many high-end applications, PQC solutions are also needed for low-end embedded devices. Embedded devices play an important role in our daily life. Despite their typically constrained resources, these devices require strong security measures to protect them against cyber attacks. Towards securing this type of devices, the second research presented in this dissertation focuses on the hash-based digital signature scheme XMSS. This research is the first that explores and presents practical hardware based XMSS solution for low-end embedded devices. In the design of XMSS hardware, a heterogenous software-hardware co-design approach was adopted, which combined the flexibility of the soft core with the acceleration from the hard core. The practicability and efficiency of the XMSS software-hardware co-design is further demonstrated by providing a hardware prototype on an open-source RISC-V based System-on-a-Chip (SoC) platform. The third research direction covered in this dissertation focuses on lattice-based cryptography, which represents one of the most promising and popular alternatives to today\u27s widely adopted public key solutions. Prior research has presented hardware designs targeting the computing blocks that are necessary for the implementation of lattice-based systems. However, a recurrent issue in most existing designs is that these hardware designs are not fully scalable or parameterized, hence limited to specific cryptographic primitives and security parameter sets. The research presented in this dissertation is the first that develops hardware accelerators that are designed to be fully parameterized to support different lattice-based schemes and parameters. Further, these accelerators are utilized to realize the first software-harware co-design of provably-secure instances of qTESLA, which is a lattice-based digital signature scheme. This dissertation demonstrates that even demanding, provably-secure schemes can be realized efficiently with proper use of software-hardware co-design. The final research presented in this dissertation is focused on the isogeny-based scheme SIKE, which recently made it to the final round of the PQC standardization process. This research shows that hardware accelerators can be designed to offload compute-intensive elliptic curve and isogeny computations to hardware in a versatile fashion. These hardware accelerators are designed to be fully parameterized to support different security parameter sets of SIKE as well as flexible hardware configurations targeting different user applications. This research is the first that presents versatile hardware accelerators for SIKE that can be mapped efficiently to both FPGA and ASIC platforms. Based on these accelerators, an efficient software-hardwareco-design is constructed for speeding up SIKE. In the end, this dissertation demonstrates that, despite being embedded with expensive arithmetic, the isogeny-based SIKE scheme can be run efficiently by exploiting specialized hardware. These four research directions combined demonstrate the practicability of building efficient hardware architectures for complex PQC algorithms. The exploration of efficient PQC solutions for different hardware platforms will eventually help migrate high-end servers and low-end embedded devices towards the post-quantum era

Fast Modular Reduction for Large-Integer Multiplication

The work contained in this thesis is a representation of the successful attempt to speed-up the modular reduction as an independent step of modular multiplication, which is the central operation in public-key cryptosystems. Based on the properties of Mersenne and Quasi-Mersenne primes, four distinct sets of moduli have been described, which are responsible for converting the single-precision multiplication prevalent in many of today\u27s techniques into an addition operation and a few simple shift operations. A novel algorithm has been proposed for modular folding. With the backing of the special moduli sets, the proposed algorithm is shown to outperform (speed-wise) the Modified Barrett algorithm by 80% for operands of length 700 bits, the least speed-up being around 70% for smaller operands, in the range of around 100 bits

A Survey of Hardware Implementations of Elliptic Curve Cryptographic Systems

Elliptic Curve Cryptography (ECC) has gained much recognition over the last decades and has established itself among the well known public-key cryptography schemes, not least due its smaller key size and relatively lower computational effort compared to RSA. The wide employment of Elliptic Curve Cryptography in many different application areas has been leading to a variety of implementation types and domains ranging from pure software approaches over hardware implementations to hardware/software co-designs. The following review provides an overview of state of the art hardware implementations of ECC, specifically in regard to their targeted design goals. In this context the suitability of the hardware/software approach in regard to the security challenges opposed by the low-end embedded devices of the Internet of Things is briefly examined. The paper also outlines ECC’s vulnerability against quantum attacks and references one possible solution to that problem