Temporal survey of P- A nd L-band polarimetric backscatter in boreal forests

Environmental conditions and seasonal variations affect the backscattered radar signal from a forest. This potentially causes errors in a biomass retrieval scheme using data from the synthetic aperture radar (SAR) data. A better understanding of these effects and the electromagnetic scattering mechanisms in forests is required to improve biomass estimation algorithms for current and upcoming P- A nd L-band SAR missions. In this paper, temporal changes in HH-, VV-, and HV-polarized P- A nd L-band radar backscatter and temporal coherence from a boreal forest site are analyzed in relation to environmental parameters. The radar data were collected from a stand of mature Norway spruce ( Picea abies (L.) Karst.) with an above-ground biomass of approximately 250 tons/ha at intervals of 5 min from January to August 2017 using the BorealScat tower-based scatterometer. It was observed that subzero temperatures during the winters cause large variations (4 to 10 dB) in P- A nd L-band backscatter, for which the HH/VV backscatter ratio offered some mitigation. High wind speeds were also seen to cause deviations in the average backscatter at P-band due to decreased double-bounce scattering. Severe temporal decorrelation was observed at L-band over timescales of days or more, whereas the P-band temporal coherence remained high (> 0.9) for at least a month neglecting windy periods. Temporal coherence at P-band was highest during night times when wind speeds are low

Regression-Based Retrieval of Boreal Forest Biomass in Sloping Terrain using P-band SAR Backscatter Intensity Data

A new biomass retrieval model for boreal forest using polarimetric P-band synthetic aperture radar (SAR) backscatter is presented. The model is based on two main SAR quantities: the HV backscatter and the HH/VV backscatter ratio. It also includes a topographic correction based on the ground slope. The model is developed from analysis of stand-wise data from two airborne P-band SAR campaigns: BioSAR 2007 (test site: Remningstorp, southern Sweden, biomass range: 10-287 tons/ha, slope range: 0-4 degrees) and BioSAR 2008 (test site: Krycklan, northern Sweden, biomass range: 8-257 tons/ha, slope range: 0-19 degrees). The new model is compared to five other models in a set of tests to evaluate its performance in different conditions. All models are first tested on data sets from Remningstorp with different moisture conditions, acquired during three periods in the spring of 2007. Thereafter, the models are tested in topographic terrain using SAR data acquired for different flight headings in Krycklan. The models are also evaluated across sites, i.e., training on one site followed by validation on the other site. Using the new model with parameters estimated on Krycklan data, biomass in Remningstorp is retrieved with RMSE of 40-59 tons/ha, or 22-33% of the mean biomass, which is lower compared to the other models. In the inverse scenario, the examined site is not well represented in the training data set, and the results are therefore not conclusive

Mapping above-ground biomass in tropical forests with ground-cancelled P-band SAR and limited reference data

This paper introduces the CASINO (CAnopy backscatter estimation, Subsampling, and Inhibited Nonlinear Optimisation) algorithm for above-ground biomass (AGB) estimation in tropical forests using P-band (435 MHz) synthetic aperture radar (SAR) data. The algorithm has been implemented in a prototype processor for European Space Agency's (ESA's) 7th Earth Explorer Mission BIOMASS, scheduled for launch in 2023. CASINO employs an interferometric ground cancellation technique to estimate canopy backscatter (CB) intensity. A power law model (PLM) is then used to model the dependence of CB on AGB for a large number of systematically distributed SAR data samples and a small number of calibration areas with a known AGB. The PLM parameters and AGB for the samples are estimated simultaneously within pre-defined intervals using nonlinear minimisation of a cost function. The performance of CASINO is assessed over six tropical forest sites on two continents: two in French Guiana, South America and four in Gabon, Africa, using SAR data acquired during airborne ESA campaigns and processed to simulate BIOMASS acquisitions. Multiple tests with only two randomly selected calibration areas with AGB > 100 t/ha are conducted to assess AGB estimation performance given limited reference data. At 2.25 ha scale and using a single flight heading, the root-mean-square difference (RMSD) is ≤ 27% for at least 50% of all tests in each test site and using as reference AGB maps derived from airborne laser scanning data. An improvement is observed when two flight headings are used in combination. The most consistent AGB estimation (lowest RMSD variation across different calibration sets) is observed for test sites with a large AGB interval and average AGB around 200–250 t/ha. The most challenging conditions are in areas with AGB < 200 t/ha and large topographic variations. A comparison with 142 1 ha plots distributed across all six test sites and with AGB estimated from in situ measurements gives an RMSD of 20% (66 t/ha)

Estimation of Forest Biomass and Faraday Rotation using Ultra High Frequency Synthetic Aperture Radar

Synthetic Aperture Radar (SAR) data in the Ultra High Frequency (UHF; 300 MHz – 3 GHz)) band have been shown to be strongly dependent of forest biomass, which is a poorly estimated variable in the global carbon cycle. In this thesis UHF-band SAR data from the fairly flat hemiboreal test site Remningstorp in southern Sweden were analysed. The data were collected on several occasions with different moisture conditions during the spring of 2007. Regression models for biomass estimation on stand level (0.5-9 ha) were developed for each date on which SAR data were acquired. For L-band (centre frequency 1.3 GHz) the best estimation model was based on HV-polarized backscatter, giving a root mean squared error (rmse) between 31% and 46% of the mean biomass. For P-band (centre frequency 340 MHz), regression models including HH, HV or HH and HV backscatter gave an rmse between 18% and 27%. Little or no saturation effects were observed up to 290 t/ha for P-band. A model based on physical-optics has been developed and was used to predict HH-polarized SAR data with frequencies from 20 MHz to 500 MHz from a set of vertical trunks standing on an undulating ground surface. The model shows that ground topography is a critical issue in SAR imaging for these frequencies. A regression model for biomass estimation which includes a correction for ground slope was developed using multi-polarized P-band SAR data from Remningstorp as well as from the boreal test site Krycklan in northern Sweden. The latter test site has pronounced topographic variability. It was shown that the model was able to partly compensate for moisture variability, and that the model gave an rmse of 22-33% when trained using data from Krycklan and evaluated using data from Remningstorp. Regression modelling based on P-band backscatter was also used to estimate biomass change using data acquired in Remningstorp during the spring 2007 and during the fall 2010. The results show that biomass change can be measured with an rmse of about 15% or 20 tons/ha. This suggests that not only deforestation, but also forest growth and degradation (e.g. thinning) can be measured using P-band SAR data. The thesis also includes result on Faraday rotation, which is an ionospheric effect which can have a significant impact on spaceborne UHF-band SAR images. Faraday rotation angles are estimated in spaceborne L-band SAR data. Estimates based on distributed targets and calibration targets with high signal to clutter ratios are found to be in very good agreement. Moreover, a strong correlation with independent measurements of Total Electron Content is found, further validating the estimates

Temporal Characteristics of Boreal Forest Radar Measurements

Radar observations of forests are sensitive to seasonal changes, meteorological variables and variations in soil and tree water content. These phenomena cause temporal variations in radar measurements, limiting the accuracy of tree height and biomass estimates using radar data. The temporal characteristics of radar measurements of forests, especially boreal forests, are not well understood. To fill this knowledge gap, a tower-based radar experiment was established for studying temporal variations in radar measurements of a boreal forest site in southern Sweden. The work in this thesis involves the design and implementation of the experiment and the analysis of data acquired. The instrument allowed radar signatures from the forest to be monitored over timescales ranging from less than a second to years. A purpose-built, 50 m high tower was equipped with 30 antennas for tomographic imaging at microwave frequencies of P-band (420-450 MHz), L-band (1240-1375 MHz) and C-band (5250-5570 MHz) for multiple polarisation combinations. Parallel measurements using a 20-port vector network analyser resulted in significantly shorter measurement times and better tomographic image quality than previous tower-based radars. A new method was developed for suppressing mutual antenna coupling without affecting the range resolution. Algorithms were developed for compensating for phase errors using an array radar and for correcting for pixel-variant impulse responses in tomographic images. Time series results showed large freeze/thaw backscatter variations due to freezing moisture in trees. P-band canopy backscatter variations of up to 10 dB occurred near instantaneously as the air temperature crossed 0⁰C, with ground backscatter responding over longer timescales. During nonfrozen conditions, the canopy backscatter was very stable with time. Evidence of backscatter variations due to tree water content were observed during hot summer periods only. A high vapour pressure deficit and strong winds increased the rate of transpiration fast enough to reduce the tree water content, which was visible as 0.5-2 dB backscatter drops during the day. Ground backscatter for cross-polarised observations increased during strong winds due to bending tree stems. Significant temporal decorrelation was only seen at P-band during freezing, thawing and strong winds. Suitable conditions for repeat-pass L-band interferometry were only seen during the summer. C-band temporal coherence was high over timescales of seconds and occasionally for several hours for night-time observations during the summer. Decorrelation coinciding with high transpiration rates was observed at L- and C-band, suggesting sensitivity to tree water dynamics.The observations from this experiment are important for understanding, modelling and mitigating temporal variations in radar observables in forest parameter estimation algorithms. The results also are also useful in the design of spaceborne synthetic aperture radar missions with interferometric and tomographic capabilities. The results motivate the implementation of single-pass interferometric synthetic aperture radars for forest applications at P-, L- and C-band

Physics-based Modeling for High-fidelity Radar Retrievals.

Knowledge of soil moisture on a global scale is crucial for understanding the Earth's water, energy, and carbon cycles. This dissertation is motivated by the need for accurate soil moisture estimates and focuses on the improvement of soil moisture retrieval based on active remote sensing over vegetated areas. It addresses important, but often neglected, aspects in radar imaging: effects related to the ionosphere, multispecies vegetation (heterogeneity at pixel level), and heterogeneity at landscape level. The first contribution is the development of a generalized radar scattering model as an advancement of current radar modeling techniques for vegetated areas at fine-scale pixel level. It consists of realistic representations of multispecies and subsurface soil layer modeling, and includes terrain topography. This modeling improvement allows greater applicability to different land cover types and higher soil moisture retrieval accuracy. Most coarse-scale satellite pixels (km-scale or coarser) contain highly heterogeneous scenes with fine-scale (100 m or finer) variability of soil moisture, soil texture, topography, and vegetation cover. The second contribution is the development of spatial scaling techniques to investigate effects of landscape-level heterogeneity on radar scattering signatures. Using the above radar forward scattering model, which assumes homogeneity over fine scales, tailor-made models are derived for the contribution of fine-scale heterogeneity to the coarse-scale satellite pixel for effective soil moisture retrieval. Finally, the third contribution is the development of a self-contained calibration technique based on an end-to-end radar system model. The model includes ionospheric effects allowing the use of spaceborne radar signals for accurate soil moisture retrieval from lower frequencies, such as L- and P-band. These combined contributions will greatly increase the usability of low-frequency spaceborne radar data for soil moisture retrieval: ionospheric effects are mitigated, landscape level heterogeneity is resolved, and fine-scale scenes are better modeled. These contributions ultimately allow improved fidelity in soil moisture retrieval and are immediately applicable in current missions such as the ongoing AirMOSS mission that observes root-zone soil moisture with a P-band radar at fine-scale resolution (100 m), and NASA's upcoming SMAP spaceborne mission, which will assess surface soil moisture with an L-band radar and radiometer at km-scale resolution (3 km).PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/107290/1/mburgin_1.pd

Radar backscatter modelling of forests using a macroecological approach

This thesis provides a new explanation for the behaviour of radar backscatter of forests using vegetation structure models from the field of macroecology. The forests modelled in this work are produced using allometry-based ecological models with backscatter derived from the parameterisation of a radiative transfer model. This work is produced as a series of papers, each portraying the importance of macroecology in defining the forest radar response. Each contribution does so by incorporating structural and dynamic effects of forest growth using one of two allometric models to expose variations in backscatter as a response to vertical and horizontal forest profiles. The major findings of these studies concern the origin of backscatter saturation effects from forest SAR surveys. In each work the importance of transition from Rayleigh to Optical scattering, combined with the scaling effects of forest structure, is emphasised. These findings are administered through evidence including the transition’s emergence as the region of dominant backscatter in a vertical profile (according to a dominant canopy scattering layer), also through the existence of a two trend backscatter relationship with volume in the shape of the typical “saturation curve” (in the absence of additional attenuating factors). The importance of scattering regime change is also demonstrated through the relationships with volume, basal area and thinning. This work’s findings are reinforced by the examination of the relationships between forest height and volume, as collective values, providing evidence to suggest the non-uniqueness of volume-toheight relationships. Each of the studies refer to growing forest communities not single trees, so that unlike typical studies of radar remote sensing of forests the impact of the macroecological structural aspects are more explicit. This study emphasises the importance of the overall forest structure in producing SAR backscatter and how backscatter is not solely influenced by electrical properties of scatteres or the singular aspects of a tree but also by the collective forest parameters defining a dynamically changing forest