Quadrature Spatial Modulation Orthogonal Frequency Division Multiplexing

This paper investigates the application of quadrature spatial modulation (QSM) to orthogonal frequency division multiplexing (OFDM). In comparison to spatial modulation OFDM (SM-OFDM), the proposed QSM-OFDM achieves an enhanced spectral efficiency by decomposing the amplitude and/or phase modulated signal into its real and imaginary components as the transmitted symbols. The index/indices of the activated transmit antenna(s) are employed to convey additional information. These symbols are transmitted orthogonally to eliminate inter-channel interference with little trade-off in synchronization. The average bit error probability for QSM-OFDM and other schemes, including the SM-OFDM, conventional multiple-input multiple-output (MIMO-OFDM), maximal-ratio combining single-input multiple-output (MRC-OFDM), vertical Bell Laboratories layered space-time architecture (VBLAST-OFDM) and Alamouti-OFDM systems are demonstrated using Monte Carlo simulation. The expressions for the receiver computational complexities in terms of the number of real operations are further derived. QSM-OFDM yields a significant signal-to-noise ratio gain of  dB with little trade-off in computational complexity over SM-OFDM, while substantial gains greater than  dB are evident, when compared to other systems

BER Performance of Alamouti with VBLAST Detection Schemes over MIMO System

Multiple-Input Multiple-Output (MIMO) systems as a means to combat fading in wireless channels. MIMO allows higher throughput, diversity gain and interference reduction. In this paper, we analyze the Bit Error Rate (BER) performance of the Alamouti Space Time Block Code with V-BLAST (Vertical Bell Laboratories Layered Space-Time) over MIMO system. Basic idea in this scheme is to improve the BER performance of systems. V-BLAST algorithm offers highly better error performance than conventional linear receivers and still has low complexity. The simulated results are based on different modulations, such as BPSK, 4-QAM and 16-QAM over Rayleigh fading channels. DOI: 10.17762/ijritcc2321-8169.150511

Unified bit-based probabilistic data association aided MIMO detection for high-order QAM constellations

A unified Bit-based Probabilistic Data Association (B-PDA) detection approach is proposed for Multiple-Input Multiple-Output (MIMO) systems employing high-order rectangular Quadrature Amplitude Modulation (QAM). The new approach transforms the symbol detection process of QAM to a bit-based process by introducing a Unified Matrix Representation (UMR) of QAM. Both linear natural and nonlinear binary reflected Gray bit-to-symbol mappings are considered. With the aid of simulation results, we demonstrate that the linear natural mapping based B-PDA approach typically attained an improved detection performance (measured in terms of both Bit Error Ratio (BER) and Symbol Error Ratio (SER)) in comparison to the conventional symbol-based PDA aided MIMO detector, despite its dramatically reduced computational complexity. The only exception is that at low SNRs, the linear natural mapping based B-PDA is slightly inferior in terms of its BER to the conventional symbol-based PDA using binary reflected Gray mapping. Furthermore, the simulation results show that the linear natural mapping based B-PDA MIMO detector may approach the best-case performance provided by the nonlinear binary reflected Gray mapping based B-PDA MIMO detector under ideal conditions. Additionally, the implementation of the B-PDA MIMO detector is shown to be much simpler in the case of the linear natural mapping. Based on these two points, we conclude that in the context of the uncoded B-PDA MIMO detector it is preferable to use the linear natural bit-to-symbol mapping, rather than the nonlinear Gray mapping

Index modulation for next generation wireless communications.

Doctoral Degree. University of KwaZulu-Natal, Durban.A multicarrier index modulation technique in the form of quadrature spatial modulation (QSM) orthogonal frequency division multiplexing (QSM-OFDM) is proposed, in which transmit antenna indices are employed to transmit additional bits. Monte Carlo simulation results demonstrates a 5 dB gain in signal-to-noise ratio (SNR) over other OFDM schemes. Furthermore, an analysis of the receiver computational complexity is presented. A low-complexity near-ML detector for space-time block coded (STBC) spatial modulation (STBC-SM) with cyclic structure (STBC-CSM), which demonstrate near-ML error performance and yields significant reduction in computational complexity is proposed. In addition, the union-bound theoretical framework to quantify the average bit-error probability (ABEP) of STBC-CSM is formulated and validates the Monte Carlo simulation results. The application of media-based modulation (MBM), to STBC-SM and STBC-CSM employing radio frequency (RF) mirrors, in the form of MBSTBC-SM and MBSTBC-CSM is proposed to improve the error performance. Numerical results of the proposed schemes demonstrate significant improvement in error performance when compared with STBC-CSM and STBC-SM. In addition, the analytical framework of the union-bound on the ABEP of MBSTBC-SM and MBSTBC-CSM for the ML detector is formulated and agrees well with Monte Carlo simulations. Furthermore, a low-complexity near-ML detector for MBSTBC-SM and MBSTBC-CSM is proposed, and achieves a near-ML error performance. Monte Carlo simulation results demonstrate a trade-off between the error performance and the resolution of the detector that is employed. Finally, the application of MBM, an index modulated system to spatial modulation, in the form of spatial MBM (SMBM) is investigated. SMBM employs RF mirrors located around the transmit antenna units to create distinct channel paths to the receiver. This thesis presents an easy to evaluate theoretical bound for the error performance of SMBM, which is validated by Monte Carlo simulation results. Lastly, two low-complexity suboptimal mirror activation pattern (MAP) optimization techniques are proposed, which improve the error performance of SMBM significantly

Cooperative MIMO Systems in Wireless Sensor Networks

28 page(s

Antenna selection and performance analysis of MIMO spatial multiplexing systems

Multiple-input multiple-output spatial multiplexing (MIMO-SM) systems offer an essential benefit referred to as spatial multiplexing gain. Two important signal reception techniques for MIMO-SM systems are the zero-forcing (ZF) and ordered successive interference cancellation (OSIC) as, for example, in the case of the decision-feedback detector (DFD). This thesis studies the communication and signal processing aspects of MIMO-SM. We first investigate the bit error rate (BER) performance of the ZF receiver over transmit correlated Ricean flat-fading channels. In particular, for a MIMO channel with M transmit and N receive antennas, we derive an approximation for the average BER of each sub-stream. A closed-form expression for the optimal transmit correlation coefficient, which achieves the maximum capacity (i.e., uncorrelated case) of two-input two-output spatial multiplexing (TITO-SM) systems, is presented. We further propose an antenna selection (AS) approach for the DFD over independent Rayleigh flat-fading channels. The selected transmit antennas are those that maximize both the post-processing signal-to-noise ratio (SNR) at the receiver end, and the system capacity. An upper bound on the outage probability for the AS approach is derived. It is shown that the AS approach achieves a performance comparable to optimal capacity-based selection based on exhaustive search, but at a lower complexity. Finally, we investigate a cross-layer transmit AS approach for the DFD over spatially correlated Ricean flat-fading channels. The selected transmit antennas are those that maximize the link layer throughput of correlated MIMO channels. A closed-form expression for the system throughput with perfect channel estimation is first derived. We further analyze the system performance with pilot-aided channel estimation. In that, we derive a closed-form expression for the post-detection signal-to-noise-plus-interference ratio (SNIR) of each transmitted substream, conditioned on the estimated channels. The derived SNIR is then used to evaluate the overall system throughput. It is observed that the cross-layer AS approach always assigns the transmission to the antenna combination which sees better channel conditions, resulting in a substantial improvement over the optimal capacity-based AS approach. Considering a training-based channel estimation technique, we compare the performance of the proposed cross-layer AS with that of optimal capacity-based AS when employed with a training-based channel estimation. Our results show that the latter is more robust to imperfect channel estimation. However, in all cases, the cross-layer AS delivers higher throughput gains than the capacity-based A