Forward error correction in 5G heterogeneous network

In this research, the feasibility of developing a complete polar FEC chain of 5th generation cellular mobile communication standard in software. Specifically, on general purpose processors. Paper work attempts to achieve stringent latency requirements through software, algorithmic and platform specific optimizations. Many algorithms in FEC chain are optimized for hardware implementations. Direct implementation of these algorithms in software results in poor performance. To obtain best performance in terms of latency on general purpose processors, these algorithms are modified or reformulated to suit processor architecture and software implementation. Initially both encoding and decoding FEC chains are implemented naively without any optimization. Code profiling is performed on this naive implementation to identify the significant latency contributors. The research split algorithms of significant latency contributing components into primitive operations. These primitive operations are optimized either with software optimizations or mapped to specialized functional units of a general-purpose processor to achieve best performance using CRC calculation in 5G cellular networks. Optimizations reduced the worst-case latency of the encoding FEC chain from 158µs which is more than 10x reduction in latency with communication rate

Fast and Flexible Software Polar List Decoders

International audienceFlexibility is one mandatory aspect of channel coding in modern wireless communication systems. Among other things, the channel decoder has to support several code lengths and code rates. This need for flexibility applies to polar codes that are considered for control channels in the future 5G standard. This paper presents a new generic and flexible implementation of a software Successive Cancellation List (SCL) decoder. A large set of parameters can be fine-tuned dynamically without re-compiling the software source code: the code length, the code rate, the frozen bits set, the puncturing patterns, the cyclic redundancy check, the list size, the type of decoding algorithm, the tree-pruning strategy and the data quantization. This generic and flexible SCL decoder enables to explore tradeoffs between throughput, latency and decoding performance. Several optimizations are proposed to achieve a competitive decoding speed despite the constraints induced by the genericity and the flexibility. The resulting polar list decoder is about 4 times faster than a generic software decoder and only 2 times slower than a non-flexible unrolled decoder. Thanks to the flexibility of the decoder, the fully adaptive SCL algorithm can be easily implemented and achieves higher throughput than any other similar decoder in the literature (up to 425 Mb/s on a single processor core for N = 2048 and K = 1723 at 4.5 dB)

Evaluation of Channel Coding Methods for Next Generation Mobile Communication Standards

La codificación de canales es crucial para los sistemas de comunicación móvil, y los sistemas de comunicación inalámbrica 5G han decidido utilizar los códigos LDPC como esquema de codificación para sus canales de datos y los códigos Polares como esquema de codificación para sus canales de control. Este estudio se centra en los fundamentos de los códigos LDPC y los códigos Polares, especialmente los nuevos códigos polares, explicando en detalle sus características de polarización y las técnicas de decodificación recursiva. También se estudia las especificaciones de diseño relacionadas con estos dos esquemas de codificación de canales en 5G. Mediante simulaciones, se compara el rendimiento del nuevo esquema de codificación de canales inalámbricos 5G con el de los códigos Turbo a diferentes longitudes de bloque y tasas de código, y se extraen conclusiones relevantes para demostrar la aplicabilidad del esquema de codificación de canales 5G NR.Channel coding is essential for mobile communication systems, and the 5G wireless standardization committees decided to use LDPC codes as the coding scheme of its data channel and Polar codes as the coding scheme of its control channel. This study focuses on the fundamentals of LDPC codes and Polar codes, especially the emerging Polar codes, with detailed explanations of their polarization characteristics and recursive decoding techniques. It is also focused on the design specification related to these two channel coding schemes in 5G. The performance of the 5G New Radio channel coding scheme is compared with that of LTE Turbo codes at different block lengths and code rates through simulations, and relevant conclusions are drawn to demonstrate the suitability of the 5G NR channel coding scheme.Grado en Ingeniería en Sistemas de Telecomunicació

Concatenated Polar Codes and Joint Source-Channel Decoding

In this dissertation, we mainly address two issues: 1. improving the finite-length performance of capacity-achieving polar codes; 2. use polar codes to efficiently exploit the source redundancy to improve the reliability of the data storage system. In the first part of the dissertation, we propose interleaved concatenation schemes of polar codes with outer binary BCH and convolutional codes to improve the finite-length performance of polar codes. For asymptotically long blocklength, we show that our schemes achieve exponential error decay rate which is much larger than the sub-exponential decay rate of standalone polar codes. In practice we show by simulation that our schemes outperform stand-alone polar codes decoded with successive cancellation or belief propagation decoding. The performance of concatenated polar and convolutional codes can be comparable to stand-alone polar codes with list decoding in the high signal to noise ratio regime. In addition to this, we show that the proposed concatenation schemes require lower memory and decoding complexity in comparison to belief propagation and list decoding of polar codes. With the proposed schemes, polar codes are able to strike a good balance between performance, memory and decoding complexity. The second part of the dissertation is devoted to improving the decoding performance of polar codes where there is leftover redundancy after source compression. We focus on language-based sources, and propose a joint-source channel decoding scheme for polar codes. We show that if the language decoder is modeled as erasure correcting outer block codes, the rate of inner polar codes can be improved while still guaranteeing a vanishing probability of error. The improved rate depends on the frozen bit distribution of polar codes and we provide a formal proof for the convergence of that distribution. Both lower bound and maximum improved rate analysis are provided. To compare with the non-iterative joint list decoding scheme for polar codes, we study a joint iterative decoding scheme with graph codes. In particular, irregular repeat accumulate codes are exploited because of low encoding/decoding complexity and capacity achieving property for the binary erasure channel. We propose how to design optimal irregular repeat accumulate codes with different models of language decoder. We show that our scheme achieves improved decoding thresholds. A comparison of joint polar decoding and joint irregular repeat accumulate decoding is given

Multi-factor Physical Layer Security Authentication in Short Blocklength Communication

Lightweight and low latency security schemes at the physical layer that have recently attracted a lot of attention include: (i) physical unclonable functions (PUFs), (ii) localization based authentication, and, (iii) secret key generation (SKG) from wireless fading coefficients. In this paper, we focus on short blocklengths and propose a fast, privacy preserving, multi-factor authentication protocol that uniquely combines PUFs, proximity estimation and SKG. We focus on delay constrained applications and demonstrate the performance of the SKG scheme in the short blocklength by providing a numerical comparison of three families of channel codes, including half rate low density parity check codes (LDPC), Bose Chaudhuri Hocquenghem (BCH), and, Polar Slepian Wolf codes for n=512, 1024. The SKG keys are incorporated in a zero-round-trip-time resumption protocol for fast re-authentication. All schemes of the proposed mutual authentication protocol are shown to be secure through formal proofs using Burrows, Abadi and Needham (BAN) and Mao and Boyd (MB) logic as well as the Tamarin-prover

Efficient decoder design for error correcting codes

Error correctiong codes (ECC) are widly used in applications to correct errors in data transmission over unreliable or noisy communication channels. Recently, two kinds of promising codes attracted lots of research interest because they provide excellent error correction performance. One is non-binary LDPC codes, and the other is polar codes. This dissertation focuses on efficient decoding algorithms and decoder design for thesetwo types of codes.Non-binary low-density parity-check (LDPC) codes have some advantages over their binary counterparts, but unfortunately their decoding complexity is a significant challenge. The iterative hard- and soft-reliability based majority-logic decoding algorithms are attractive for non-binary LDPC codes, since they involve only finite field additions and multiplications as well as integer operations and hence have significantly lower complexity than other algorithms. We propose two improvements to the majority-logic decoding algorithms. Instead of the accumulation of reliability information in the ex-isting majority-logic decoding algorithms, our first improvement is a new reliability information update. The new update not only results in better error performance and fewer iterations on average, but also further reduces computational complexity. Since existing majority-logic decoding algorithms tend to have a high error floor for codes whose parity check matrices have low column weights, our second improvement is a re-selection scheme, which leads to much lower error floors, at the expense of more finite field operations and integer operations, by identifying periodic points, re-selectingintermediate hard decisions, and changing reliability information.Polar codes are of great interests because they provably achieve the symmetric capacity of discrete memoryless channels with arbitrary input alphabet sizes an explicit construction. Most existing decoding algorithms of polar codes are based on bit-wise hard or soft decisions. We propose symbol-decision successive cancellation (SC) and successive cancellation list (SCL) decoders for polar codes, which use symbol-wise hard or soft decisions for higher throughput or better error performance. Then wepropose to use a recursive channel combination to calculate symbol-wise channel transition probabilities, which lead to symbol decisions. Our proposed recursive channel combination has lower complexity than simply combining bit-wise channel transition probabilities. The similarity between our proposed method and Arıkan’s channel transformations also helps to share hardware resources between calculating bit- and symbol-wise channel transition probabilities. To reduce the complexity of the list pruning, atwo-stage list pruning network is proposed to provide a trade-off between the error performance and the complexity of the symbol-decision SCL decoder. Since memory is a significant part of SCL decoders, we also propose a pre-computation memory-saving technique to reduce memory requirement of an SCL decoder.To reduce the complexity of the recursive channel combination further, we propose an approximate ML (AML) decoding unit for SCL decoders. In particular, we investigate the distribution of frozen bits of polar codes designed for both the binary erasure and additive white Gaussian noise channels, and take advantage of the distribution to reduce the complexity of the AML decoding unit, improving the throughput-area efficiency of SCL decoders.Furthermore, to adapt to variable throughput or latency requirements which exist widely in current communication applications, a multi-mode SCL decoder with variable list sizes and parallelism is proposed. If high throughput or small latency is required, the decoder decodes multiple received words in parallel with a small list size. However, if error performance is of higher priority, the multi-mode decoder switches to a serialmode with a bigger list size. Therefore, the multi-mode SCL decoder provides a flexible tradeoff between latency, throughput and error performance at the expense of small overhead