16 research outputs found
5G 3GPP-like Channel Models for Outdoor Urban Microcellular and Macrocellular Environments
For the development of new 5G systems to operate in bands up to 100 GHz,
there is a need for accurate radio propagation models at these bands that
currently are not addressed by existing channel models developed for bands
below 6 GHz. This document presents a preliminary overview of 5G channel models
for bands up to 100 GHz. These have been derived based on extensive measurement
and ray tracing results across a multitude of frequencies from 6 GHz to 100
GHz, and this document describes an initial 3D channel model which includes: 1)
typical deployment scenarios for urban microcells (UMi) and urban macrocells
(UMa), and 2) a baseline model for incorporating path loss, shadow fading, line
of sight probability, penetration and blockage models for the typical
scenarios. Various processing methodologies such as clustering and antenna
decoupling algorithms are also presented.Comment: To be published in 2016 IEEE 83rd Vehicular Technology Conference
Spring (VTC 2016-Spring), Nanjing, China, May 201
A Novel Millimeter-Wave Channel Simulator and Applications for 5G Wireless Communications
This paper presents details and applications of a novel channel simulation
software named NYUSIM, which can be used to generate realistic temporal and
spatial channel responses to support realistic physical- and link-layer
simulations and design for fifth-generation (5G) cellular communications.
NYUSIM is built upon the statistical spatial channel model for broadband
millimeter-wave (mmWave) wireless communication systems developed by
researchers at New York University (NYU). The simulator is applicable for a
wide range of carrier frequencies (500 MHz to 100 GHz), radio frequency (RF)
bandwidths (0 to 800 MHz), antenna beamwidths (7 to 360 degrees for azimuth and
7 to 45 degrees for elevation), and operating scenarios (urban microcell, urban
macrocell, and rural macrocell), and also incorporates multiple-input
multiple-output (MIMO) antenna arrays at the transmitter and receiver. This
paper also provides examples to demonstrate how to use NYUSIM for analyzing
MIMO channel conditions and spectral efficiencies, which show that NYUSIM is an
alternative and more realistic channel model compared to the 3rd Generation
Partnership Project (3GPP) and other channel models for mmWave bands.Comment: 7 pages, 8 figures, in 2017 IEEE International Conference on
Communications (ICC), Paris, May 201
Constant envelope transceivers in millimetre-wave massive MIMO: EVM and link budget considerations
RF 30 GHz ray-tracing simulation results are presented from a conceptual Massive-Multiple Input Multiple Output (M-MIMO) propagation model in an urban canyon. The usage of Constant Envelope (CE) RF signals is evaluated in both propagation ray-rich and ray-sparse scenarios. Multiple mobile terminals are simulated each employing single carrier Phase Shift Keying (PSK). It is found that once an operational link budget is achieved CE transmitters have negligible effect on a received Error Vector Magnitude (EVM). Finally it is found that the EVM is a function of both richness of propagation rays as well as the relative proximities of mobile users. A worst-case EVM of circa 25% is observed when terminals are separated by 1m reducing to circa 5% when terminals are separated by more than 4m
Investigation of Prediction Accuracy, Sensitivity, and Parameter Stability of Large-Scale Propagation Path Loss Models for 5G Wireless Communications
This paper compares three candidate large-scale propagation path loss models
for use over the entire microwave and millimeter-wave (mmWave) radio spectrum:
the alpha-beta-gamma (ABG) model, the close-in (CI) free space reference
distance model, and the CI model with a frequency-weighted path loss exponent
(CIF). Each of these models have been recently studied for use in standards
bodies such as 3GPP, and for use in the design of fifth generation (5G)
wireless systems in urban macrocell, urban microcell, and indoor office and
shopping mall scenarios. Here we compare the accuracy and sensitivity of these
models using measured data from 30 propagation measurement datasets from 2 GHz
to 73 GHz over distances ranging from 4 m to 1238 m. A series of sensitivity
analyses of the three models show that the physically-based two-parameter CI
model and three-parameter CIF model offer computational simplicity, have very
similar goodness of fit (i.e., the shadow fading standard deviation), exhibit
more stable model parameter behavior across frequencies and distances, and
yield smaller prediction error in sensitivity testing across distances and
frequencies, when compared to the four-parameter ABG model. Results show the CI
model with a 1 m close-in reference distance is suitable for outdoor
environments, while the CIF model is more appropriate for indoor modeling. The
CI and CIF models are easily implemented in existing 3GPP models by making a
very subtle modification -- by replacing a floating non-physically based
constant with a frequency-dependent constant that represents free space path
loss in the first meter of propagation.Comment: Open access available at:
http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=743465
On the Performance of Spatially Correlated Large Antenna Arrays for Millimeter-Wave Frequencies
A spatially correlated large antenna array operating at millimeter-wave (mmWave) frequencies is considered. Based on a Saleh-Valenzuela channel model, closed-form expressions of the 3-D spatial correlation (SC) for wide, narrow, and Von Mises power elevation spectra (PESs) are analytically derived. The effects of the PES on the convergence to massive multiple-input-multiple-output properties are then illustrated by defining and deriving a diagonal dominance metric. Numerically, the effects of antenna element mutual coupling (MC) are shown on the effective SC, eigenvalue structure, and mmWave user rate for different antenna topologies. It is concluded that although MC can significantly reduce SC for side-by-side dipole antenna elements, the change in antenna effective gain (and, therefore, signal-to-noise ratio) caused by MC becomes a dominating effect and ultimately determines the antenna array performance. The user rate of an mmWave system with hybrid beamforming, using an orthogonal matching pursuit (OMP) algorithm, is then shown for different antenna topologies with dipole and cross-polarized (x-pol) antenna elements. It is seen that even for small numbers of radio frequency chains, the OMP algorithm works well relative to the fully digital case for channels with high SC, such as the x-pol antenna array