119 research outputs found
Progressive Linear Precoder Optimization for MIMO Packet Retransmissions
This paper investigates the optimal linear precoder design for packet retransmissions in multi-input-multi-output (MIMO) systems. To fully utilize the time diversity provided by automatic repeat request (ARQ), we derive a sequence of successive optimal linear ARQ precoders for flat fading MIMO channels, which minimize the mean-square error between the transmitted data and the joint receiver output. The optimization is subject to an overall transmit power constraint. This progressive linear ARQ precoder combines the appropriate power loading and the optimal pairing of channel matrix singular values in the current retransmission with previous transmissions. This optimal pairing is a special feature unique to our sequential ARQ precoding approach. Simulation results demonstrate the effectiveness of this optimized ARQ precoding in reducing symbol MSE and detection bit-error rate
On the Required Number of Antennas in a Point-to-Point Large-but-Finite MIMO System: Outage-Limited Scenario
This paper investigates the performance of the point-to-point
multiple-input-multiple-output (MIMO) systems in the presence of a large but
finite numbers of antennas at the transmitters and/or receivers. Considering
the cases with and without hybrid automatic repeat request (HARQ) feedback, we
determine the minimum numbers of the transmit/receive antennas which are
required to satisfy different outage probability constraints. Our results are
obtained for different fading conditions and the effect of the power amplifiers
efficiency on the performance of the MIMO-HARQ systems is analyzed. Moreover,
we derive closed-form expressions for the asymptotic performance of the
MIMO-HARQ systems when the number of antennas increases. Our analytical and
numerical results show that different outage requirements can be satisfied with
relatively few transmit/receive antennas.Comment: Under review in IEEE Transactions on Communication
On the Performance of MIMO-ARQ Systems with Channel State Information at the Receiver
This paper investigates the performance of multiple-input-multiple-output (MIMO) systems in the presence of automatic repeat request (ARQ) feedback. We show that, for a large range of performance metrics, the data transmission efficiency of the ARQ schemes is determined by a set of parameters which are scheme-dependent and not metric-dependent. Then, the results are used to study different aspects of MIMO-ARQ such as the effect of nonlinear power amplifiers, large-scale MIMO-ARQ, adaptive power allocation and different data communication models. The results, which are valid for various forward and feedback channel models, show the efficiency of the MIMO-ARQ techniques in different conditions
Resource allocation for transmit hybrid beamforming in decoupled millimeter wave multiuser-MIMO downlink
This paper presents a study on joint radio resource allocation and hybrid precoding in multicarrier massive multiple-input multiple-output communications for 5G cellular networks. In this paper, we present the resource allocation algorithm to maximize the proportional fairness (PF) spectral efficiency under the per subchannel power and the beamforming rank constraints. Two heuristic algorithms are designed. The proportional fairness hybrid beamforming algorithm provides the transmit precoder with a proportional fair spectral efficiency among users for the desired number of radio-frequency (RF) chains. Then, we transform the number of RF chains or rank constrained optimization problem into convex semidefinite programming (SDP) problem, which can be solved by standard techniques. Inspired by the formulated convex SDP problem, a low-complexity, two-step, PF-relaxed optimization algorithm has been provided for the formulated convex optimization problem. Simulation results show that the proposed suboptimal solution to the relaxed optimization problem is near-optimal for the signal-to-noise ratio SNR <= 10 dB and has a performance gap not greater than 2.33 b/s/Hz within the SNR range 0-25 dB. It also outperforms the maximum throughput and PF-based hybrid beamforming schemes for sum spectral efficiency, individual spectral efficiency, and fairness index
Using Channel Output Feedback to Increase Throughput in Hybrid-ARQ
Hybrid-ARQ protocols have become common in many packet transmission systems
due to their incorporation in various standards. Hybrid-ARQ combines the normal
automatic repeat request (ARQ) method with error correction codes to increase
reliability and throughput. In this paper, we look at improving upon this
performance using feedback information from the receiver, in particular, using
a powerful forward error correction (FEC) code in conjunction with a proposed
linear feedback code for the Rayleigh block fading channels. The new hybrid-ARQ
scheme is initially developed for full received packet feedback in a
point-to-point link. It is then extended to various different multiple-antenna
scenarios (MISO/MIMO) with varying amounts of packet feedback information.
Simulations illustrate gains in throughput.Comment: 30 page
Communicating over Filter-and-Forward Relay Networks with Channel Output Feedback
Relay networks aid in increasing the rate of communication from source to
destination. However, the capacity of even a three-terminal relay channel is an
open problem. In this work, we propose a new lower bound for the capacity of
the three-terminal relay channel with destination-to-source feedback in the
presence of correlated noise. Our lower bound improves on the existing bounds
in the literature. We then extend our lower bound to general relay network
configurations using an arbitrary number of filter-and-forward relay nodes.
Such network configurations are common in many multi-hop communication systems
where the intermediate nodes can only perform minimal processing due to limited
computational power. Simulation results show that significant improvements in
the achievable rate can be obtained through our approach. We next derive a
coding strategy (optimized using post processed signal-to-noise ratio as a
criterion) for the three-terminal relay channel with noisy channel output
feedback for two transmissions. This coding scheme can be used in conjunction
with open-loop codes for applications like automatic repeat request (ARQ) or
hybrid-ARQ.Comment: 15 pages, 8 figures, to appear in IEEE Transactions on Signal
Processin
Joint Scheduling and ARQ for MU-MIMO Downlink in the Presence of Inter-Cell Interference
User scheduling and multiuser multi-antenna (MU-MIMO) transmission are at the
core of high rate data-oriented downlink schemes of the next-generation of
cellular systems (e.g., LTE-Advanced). Scheduling selects groups of users
according to their channels vector directions and SINR levels. However, when
scheduling is applied independently in each cell, the inter-cell interference
(ICI) power at each user receiver is not known in advance since it changes at
each new scheduling slot depending on the scheduling decisions of all
interfering base stations. In order to cope with this uncertainty, we consider
the joint operation of scheduling, MU-MIMO beamforming and Automatic Repeat
reQuest (ARQ). We develop a game-theoretic framework for this problem and build
on stochastic optimization techniques in order to find optimal scheduling and
ARQ schemes. Particularizing our framework to the case of "outage service
rates", we obtain a scheme based on adaptive variable-rate coding at the
physical layer, combined with ARQ at the Logical Link Control (ARQ-LLC). Then,
we present a novel scheme based on incremental redundancy Hybrid ARQ (HARQ)
that is able to achieve a throughput performance arbitrarily close to the
"genie-aided service rates", with no need for a genie that provides
non-causally the ICI power levels. The novel HARQ scheme is both easier to
implement and superior in performance with respect to the conventional
combination of adaptive variable-rate coding and ARQ-LLC.Comment: Submitted to IEEE Transactions on Communications, v2: small
correction
- …