Towards Scalable Cost-Effective Service and Survivability Provisioning in Ultra High Speed Networks

Optical transport networks based on wavelength division multiplexing (WDM) are considered to be the most appropriate choice for future Internet backbone. On the other hand, future DOE networks are expected to have the ability to dynamically provision on-demand survivable services to suit the needs of various high performance scientific applications and remote collaboration. Since a failure in aWDMnetwork such as a cable cut may result in a tremendous amount of data loss, efficient protection of data transport in WDM networks is therefore essential. As the backbone network is moving towards GMPLS/WDM optical networks, the unique requirement to support DOE’s science mission results in challenging issues that are not directly addressed by existing networking techniques and methodologies. The objectives of this project were to develop cost effective protection and restoration mechanisms based on dedicated path, shared path, preconfigured cycle (p-cycle), and so on, to deal with single failure, dual failure, and shared risk link group (SRLG) failure, under different traffic and resource requirement models; to devise efficient service provisioning algorithms that deal with application specific network resource requirements for both unicast and multicast; to study various aspects of traffic grooming in WDM ring and mesh networks to derive cost effective solutions while meeting application resource and QoS requirements; to design various diverse routing and multi-constrained routing algorithms, considering different traffic models and failure models, for protection and restoration, as well as for service provisioning; to propose and study new optical burst switched architectures and mechanisms for effectively supporting dynamic services; and to integrate research with graduate and undergraduate education. All objectives have been successfully met. This report summarizes the major accomplishments of this project. The impact of the project manifests in many aspects: First, the project addressed many essential problems that arisen in current and future WDM optical networks, and provided a host of innovative solutions though there was no invention or patent filing. This project resulted in more than 2 dozens publications in major journals and conferences (including papers in IEEE Transactions and journals, as well as a book chapter). Our publications have been cited by many peer researchers. In particular, one of our conference papers was nominated for the best paper award of IEEE/Create-Net Broadnets (International Conference on Broadband Communications, Networks, and Systems) 2006. Second, the results and solutions of this project were well received by DOE Labs where presentations were given by the PI. We hope to continue the collaboration with DOE Labs in the future. Third, the project was the first to propose and extensively study multicast traffic grooming, new traffic models such as sliding scheduled traffic model and scheduled traffic model. Our research has sparkled a flurry of recent studies and publications by the research community in these areas. Fourth, the project has benefited a diverse population of students by motivating, engaging, enhancing their learning and skills. The project has been conducted in a manner conducive to the training of students both at graduate and undergraduate levels. As a result, one Ph.D., Dr. Abdur Billah, was graduated. Another Ph.D. student, Tianjian Li, will graduate in January 2007. In addition, four MS students were graduated. One undergraduate student, Jeffrey Alan Shininger, completed his university honors project. Fifth, thanks to the support of this ECPI project, the PI has obtained additional funding from the National Science Foundation, the Air Force Research Lab, and other sources. A few other proposals are pending. Finally, this project has also significantly impacted the curricula and resulted in the enhancement of courses at the graduate and undergraduate levels, therefore strengthening the bond between research and education

Multicast protection and energy efficient traffic grooming in optical wavelength routing networks.

Zhang, Shuqiang.Thesis (M.Phil.)--Chinese University of Hong Kong, 2010.Includes bibliographical references (p. 74-80).Abstracts in English and Chinese.Abstract --- p.i摘要 --- p.ivAcknowledgements --- p.vTable of Contents --- p.viChapter Chapter 1 --- Background --- p.1Chapter 1.1 --- Routing and Wavelength Assignment --- p.1Chapter 1.2 --- Survivability in Optical Networks --- p.3Chapter 1.3 --- Optical Multicasting --- p.4Chapter 1.3.1 --- Routing and Wavelength Assignment of Optical Multicast --- p.5Chapter 1.3.2 --- Current Research Topics about Optical Multicast --- p.8Chapter 1.4 --- Traffic Grooming --- p.10Chapter 1.4.1 --- Static Traffic Grooming --- p.11Chapter 1.4.2 --- Dynamic Traffic Grooming --- p.13Chapter 1.5 --- Contributions --- p.15Chapter 1.5.1 --- Multicast Protection with Scheduled Traffic Model --- p.15Chapter 1.5.2 --- Energy Efficient Time-Aware Traffic Grooming --- p.16Chapter 1.6 --- Organization of Thesis --- p.18Chapter Chapter 2 --- Multicast Protection in WDM Optical Network with Scheduled Traffic --- p.19Chapter 2.1 --- Introduction --- p.19Chapter 2.2 --- Multicast Protection under FSTM --- p.22Chapter 2.3 --- Illustrative Examples --- p.28Chapter 2.4 --- Two-Step Optimization under SSTM --- p.37Chapter 2.5 --- Summary --- p.40Chapter Chapter 3 --- Energy Efficient Time-Aware Traffic Grooming in Wavelength Routing Networks --- p.41Chapter 3.1 --- Introduction --- p.41Chapter 3.2 --- Energy consumption model --- p.43Chapter 3.3 --- Static Traffic Grooming with Time awareness --- p.44Chapter 3.3.1 --- Scheduled Traffic Model for Traffic Grooming --- p.44Chapter 3.3.2 --- ILP Formulation --- p.44Chapter 3.3.3 --- Illustrative Numerical Example --- p.48Chapter 3.4 --- Dynamic Traffic Grooming with Time Awareness --- p.49Chapter 3.4.1 --- Time-Aware Traffic Grooming (TATG) --- p.51Chapter 3.5 --- Simulation Results of Dynamic Traffic Grooming --- p.54Chapter 3.5.1 --- 24-node USNET: --- p.55Chapter 3.5.2 --- 15-node Pacific Bell Network: --- p.59Chapter 3.5.3 --- 14-node NSFNET: --- p.63Chapter 3.5.4 --- Alternative Configuration of Simulation Parameters: --- p.67Chapter 3.6 --- Summary --- p.71Chapter Chapter 4 --- Conclusions and Future Work --- p.72Chapter 4.1 --- Conclusions --- p.72Chapter 4.2 --- Future Work --- p.73Bibliography --- p.74Publications during M.Phil Study --- p.8

Wavelengths switching and allocation algorithms in multicast technology using m-arity tree networks topology

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University London.In this thesis, the m-arity tree networks have been investigated to derive equations for their nodes, links and required wavelengths. The relationship among all parameters such as leaves nodes, destinations, paths and wavelengths has been found. Three situations have been explored, firstly when just one server and the leaves nodes are destinations, secondly when just one server and all other nodes are destinations, thirdly when all nodes are sources and destinations in the same time. The investigation has included binary, ternary, quaternary and finalized by general equations for all m-arity tree networks. Moreover, a multicast technology is analysed in this thesis to transmit data carried by specific wavelengths to several clients. Wavelengths multicast switching is well examined to propose split-convert-split-convert (S-C-S-C) multicast switch which consists of light splitters and wavelengths converters. It has reduced group delay by 13% and 29% compared with split-convert (S-C) and split-convert-split (S-C-S) multicast switches respectively. The proposed switch has also increased the received signal power by a significant value which reaches 28% and 26.92% compared with S-C-S and S-C respectively. In addition, wavelengths allocation algorithms in multicast technology are proposed in this thesis using tree networks topology. Distributed scheme is adopted by placing wavelength assignment controller in all parents’ nodes. Two distributed algorithms proposed shortest wavelength assignment (SWA) and highest number of destinations with shortest wavelength assignment (HND-SWA) algorithms to increase the received signal power, decrease group delay and reduce dispersion. The performance of the SWA algorithm was almost better or same as HND-SWA related to the power, dispersion and group delay but they are always better than other two algorithms. The required numbers of wavelengths and their utilised converters have been examined and calculated for the researched algorithms. The HND-SWA has recorded the superior performance compared with other algorithms. It has reduced number of utilised wavelengths up to about 19% and minimized number of the used wavelengths converters up to about 29%. Finally, the centralised scheme is discussed and researched and proposed a centralised highest number of destinations (CHND) algorithm with static and dynamic scenarios to reduce network capacity decreasing (Cd) after each wavelengths allocation. The CDHND has reduced (Cd) by about 16.7% compared with the other algorithms

Virtual Topology Reconfrigation of WDM Optical Network with Minimum Physical Node

This paper review the reconfiguration of high capacity WDM optical Network, messages are carried in all optical form using light paths. The set of semi-permanent light paths which are set up in the network may be viewed as a virtual topology by higher layers such as SONET, ATM and IP. Reconfiguration is to charge in virtual topology to meet traffic pattern in high layers. It provides a trade off between objective value and the no. of changes to the virtual topology. In another study Objective is to design the logical topology & routing Algorithm on physical topology, so as to minimize the net work congestion while constraining the average delay seen by source destination pair and the amount of processing required at the nodes. Failure handling in WDM Networks is of prime importance due to the nature and volume of traffic, these network carry, failure detection is usually achieved by exchanging control messages among nodes with time out mechanism. Newer and more BW thirsty applications emerging on the horizon and WDM is to leveraging the capabilities of the optical fiber Wavelength  routing  is  the  ability  to  switch  a  signal  at intermediate  nodes  in  a  WDM  network  based  on  their wavelength. Virtual topology can be reconfigured when necessary to improve performance. To create the virtual topology different from the physical topology of the underlying network, is the ability of wavelength routing WDM. Keywords: WDM, Physical Topology, Virtual Topology and Reconfiguratio

Design and protection algorithms for path level aggregation of traffic in WDM metro optical networks

Wavelength Division Multiplexing (WDM) promises to offer a cost effective and scalable solution to meet the emerging demands of the Internet. WDM splits the tremendous bandwidth latent in a fiber into multiple non-overlapping wavelength channels, each of which can be operated at the peak electronic rate. Commercial systems with 128 wavelengths and transmission rates of up to 40 Gbps per wavelength have been made possible using state of the art optical technologies to deal with physical impairments. Systems with higher capacities are likely to evolve in the future. The end user requirements for bandwidth, on the other hand, have been ranging from 155 Mbps to 2.5 Gbps. Dedicating a wavelength for each end user will lead to severe underutilization of WDM channels. This brings to forefront the requirement for sharing of bandwidth in a wavelength among multiple end users.;The concept of wavelength sharing among multiple clients is called grooming. Grooming can be done purely at the optical layer (optical grooming) or it can be done with support from the client layer (electronic grooming). The advantage of all optical grooming is the ease of scalability due to its transparency as opposed to electronic grooming which is constrained by electronic bottlenecks. Efforts towards enhancing optical grooming is pursued through increasing optical switching speeds. However, technologies to make optical switches with high speeds, large port counts and low insertion losses have been elusive and may continue to remain so in the near future.;Recently, there have been some research into designing new architectures and protocols focused on optical grooming without resorting to fast optical switching. Typically, this is achieved in three steps: (1) configure the circuit in the form of a path or a tree; (2) use optical devices like couplers or splitters to allow multiple transmitters and/or receivers to share the same circuit; and (3) provide an arbitration mechanism to avoid contention among end users of the circuit. This transparent sharing of the wavelength channel utilizes the network resources better than the conventional low-speed circuit switched approaches. Consequently, it becomes important to quantify the improvement in achieved performance and evaluate if the reaped benefits justify the cost of the required additional hardware and software.;The contribution of this thesis is two fold: (1) developing a new architecture called light-trails as an IP based solution for next generation WDM optical networks, and (2) designing a unified framework to model Path Level Aggregation of Traffic in metrO Optical Networks (PLATOONs). The algorithms suggested here have three features: (1) accounts for four different path level aggregation strategies---namely, point to point (for example, lightpaths), point to multi-point (for example, source based light-trails), multi-point to point (for example, destination based light-trails) and multi-point to multi-point (for example, light-trails); (2) incorporates heterogenous switching architectures; and (3) accommodates multi-rate traffic. Algorithms for network design and survivability are developed for PLATOONs in the presence of both static and dynamic traffic. Connection level dedicated/shared, segregated/mixed protection schemes are formulated for single link failures in the presence of static and dynamic traffic. A simple medium access control protocol that avoids collisions when the channel is shared by multiple clients is also proposed.;Based on extensive simulations, we conclude that, for the studied scenarios, (1) when client layer has no electronic grooming capabilities, light-trails (employing multi-point to multi-point aggregation strategy) perform several orders of magnitude better than lightpaths and (2) when client layer has full electronic grooming capabilities, source based light-trails (employing point to multi-point aggregation strategy) perform the best in wavelength limited scenarios and lightpaths perform the best in transceiver limited scenarios.;The algorithms that are developed here will be helpful in designing optical networks that deploy path level aggregation strategies. The proposed ideas will impact the design of transparent, high-speed all-optical networks.</p

Advanced techniques for multicast service provision in core transport networks

Although the network-based multicast service is the optimal way to support of a large variety of popular applications such as high-definition television (HDTV), videoon- demand (VoD), virtual private LAN service (VPLS), grid computing, optical storage area networks (O-SAN), video conferencing, e-learning, massive multiplayer online role-playing games (MMORPG), networked virtual reality, etc., there are a number of technological and operational reasons that prevents a wider deployment. This PhD work addresses this problem in the context of core transport network, by proposing and analyzing new cost-effective and scalable techniques to support multicast both at the Optical layer and at the Network layer (MPLS-IP networks). In the Optical layer, in particular in Wavelength Division Multiplexing (WDM) Optical Circuit Switched networks, current multicast-capable OXC node designs are of a great complexity and have high attenuation levels, mainly because of the required signal splitting operation plus the traversal of a complex switching stage. This makes multi-point support rarely included in commercial OXC nodes. Inspired in previous works in the literature, we propose a novel architecture that combines the best of splitting and tap-and-continue (TaC), called 2-STC (2-split-tap-and-continue) in the framework of integrated optics. A 2-STC OXC node is a flexible design capable of tapping and splitting over up to two outgoing links in order to obtain lower end-to-end latency than in TaC and an improved power budget distribution over split-and-delivery (SaD) designs. Another advantage of this architecture is its simplicity and the reduced number of components required, scaling well even for implementations of the node with many input/output ports. Extensive simulations show that the binary split (2-split) is quite enough for most real-life core network topologies scenarios, since the average node degree is usually between 3 and 4. A variant of this design, called 2-STCg, for making the node capable of optical traffic grooming (i.e. accommodation of low-speed demands into wavelength-links) is also presented. At the Network layer, one of the main reasons that hinder multicast deployment is the high amount of forwarding state information required in core routers, especially when a large number of medium/small-sized multicast demands arrive to the core network, because the state data that needs to be kept at intermediate core routers grows proportionally to the number of multicast demands. In this scenario, we study the aggregation of multicast demands into shared distribution trees, providing a set of techniques to observe the trade-off between bandwidth and state information. This study is made in the context of MPLS VPN-based networks, with the aggregation of multicast VPNs in different real network scenarios and using novel heuristics for aggregation. Still, the main problem of aggregation is the high percentage of wasted bandwidth that depends mainly on the amount of shared trees used. On the other hand, recent works have brought back Bloom filters as an alternative for multicast forwarding. In this approach the packet header contains a Bloom filter that is evaluated at each hop for matching with the corresponding outgoing link ID. Although this approach is claimed to be stateless, it presents serious drawbacks due to false positives, namely important forwarding anomalies (duplicated flows, packet storms and loops) and the header overhead. In order to solve these drawbacks we propose D-MPSS (Depth-Wise Multi-Protocol Stateless Switching). This technique makes use of a stack of Bloom filters instead of a single one for all the path/tree, each one including only the links of a given depth of the tree. Analytical studies and simulations show that our approach reduces the forwarding anomalies present in similar state-of-the-art techniques, achieving in most network scenarios a forwarding efficiency (useful traffic) greater than 95%. Finally, we study the possibility of using tree aggregation and Bloom filters together, and propose a set of techniques grouped as H-ABF techniques (hybrid aggregation - Bloom filter-based forwarding), which improve D-MPSS and other previously proposed techniques, practically eliminating the forwarding loops and increasing the forwarding efficiency up to more than 99% in most network scenarios. -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Aunque el servicio de multidifusión (multicast) basado en redes es la mejor manera de dar soporte a una gran variedad de aplicaciones populares como la televisión de alta definición (HDTV), el video bajo demanda (VoD), el servicio de LAN privadas virtuales (VPLS), la computación grid, las redes de área de almacenamiento óptico (O-SAN), la videoconferencia, la educación a distancia, los juegos masivos de rol en línea de múltiples jugadores (MMORPG), la realidad virtual en red, etc., hay varias razones tecnológicas y operacionales que le impiden un mayor despliegue. Esta tesis doctoral aborda este problema en el contexto de las redes troncales de transporte, proponiendo y analizando técnicas de bajo coste y escalables para dar soporte al multicast tanto para la capa óptica como para la capa de red (redes MPLS-IP). En la capa óptica, en particular en las redes ópticas conmutadas por circuitos con multiplexación de longitud de onda (WDM), los diseños de nodos OXC con capacidades multicast muestran una gran complejidad y altos niveles de atenuación, principalmente debido a la necesaria operación de división de la señal, además del paso de ella a través de una compleja fase de conmutación. Esto hace que el soporte multi-punto sea raramente incluido en los nodos OXC comerciales. Inspirados en trabajos previos de la literatura, proponemos una novedosa arquitectura que combina lo mejor de dividir (splitting) y tap-y-continuar (TaC), llamado 2-STC (2-split-tapand- continue) en el marco de trabajo de la óptica integrada. Un nodo OXC 2-STC es un diseño flexible capaz de hacer tapping (tomar una pequeña muestra de la señal) y dividir la señal hacia un máximo de dos enlaces de salida, con el fin de obtener una menor latencia terminal-a-terminal que en TaC y una mejorada distribución de la disponibilidad de potencia por encima de los diseños split-and-delivery (SaD). Otra ventaja de esta arquitectura es su simplicidad y el número reducido de componentes requerido, escalando bien para las implementaciones del nodo con muchos puertos de entrada/salida. Extensas simulaciones muestran que la división binaria (2-split) es prácticamente suficiente para la mayoría de las topologías de redes de transporte en la vida real, debido a que el grado promedio de los nodos es usualmente 3 y 4. Una variante de este diseño, llamada 2-STCg, para hacer el nodo capaz de realizar grooming (es decir, la capacidad de acomodar demandas de menor velocidad en longitudes de onda - enlaces) de tráfico óptico, es también presentada. En la capa de red, una de las principales razones que obstaculizan el despliegue del multicast es la gran cantidad de información del estado de reenvío requerida en los enrutadores de la red de transporte, especialmente cuando un gran número de demandas multicast de tamaño mediano/pequeño llegan a la red de transporte, ya que los datos de estado a ser almacenados en los enrutadores crecen proporcionalmente con el número de demandas multicast. En este escenario, estudiamos la agregación de demandas multicast en árboles de distribución, proporcionando un conjunto de técnicas para observar el equilibrio entre el ancho de banda y la información de estado. Este estudio está hecho en el contexto de las redes basadas en redes privadas virtuales (VPN) MPLS, con la agregación de VPNs multicast en distintos escenarios de redes reales y utilizando nuevos heurísticos para la agregación. Aún así, el principal problema de la agregación es el alto porcentaje de ancho de banda desperdiciado que depende principalmente de la cantidad de árboles compartidos usados. Por otro lado, trabajos recientes han vuelto a traer a los filtros de Bloom como una alternativa para realizar el reenvío multicast. En esta aproximación la cabecera del paquete contiene un filtro de Bloom que es evaluado en cada salto para emparejarlo con el identificador del enlace de salida correspondiente. Aunque se afirma que esta solución no utiliza información de estado, presenta serias desventajas debido a los falsos positivos, esto es, anomalías de reenvío importantes (flujos duplicados, tormentas de paquetes y bucles) y gasto de ancho de banda por la cabecera de los paquetes. Para poder resolver estos problemas proponemos D-MPSS (Depth- Wise Multi-Protocol Stateless Switching). Esta técnica hace uso de una pila de filtros de Bloom en lugar de uno sólo para todo el camino/árbol, incluyendo cada uno sólo los enlaces de una determinada profundidad del árbol. Estudios analíticos y simulaciones demuestran que nuestra propuesta reduce los anomalías de reenvío presentes en otras técnicas similares del estado del arte, alcanzando en la mayoría de escenarios reales una eficiencia de reenvío (tráfico útil) mayor que 95%. Finalmente, estudiamos la posibilidad de usar agregación de árboles y filtros de Bloom juntos, y proponemos un conjunto de técnicas agrupadas como técnicas HABF (hybrid aggregation - Bloom filter-based forwarding), que mejoran D-MPSS y las otras técnicas propuestas previamente, eliminando prácticamente los bucles e incrementando la eficiencia de reenvío hasta más de un 99% en la mayoría de los escenarios de redes

In-operation planning in flexgrid optical core networks

New generation applications, such as cloud computing or video distribution, can run in a telecom cloud infrastructure where the datacenters (DCs) of telecom operators are integrated in their networks thus, increasing connections' dynamicity and resulting in time-varying traffic capacities, which might also entail changes in the traffic direction along the day. As a result, a flexible optical technology able to dynamically set-up variable-capacity connections, such as flexgrid, is needed. Nonetheless, network dynamicity might entail network performance degradation thus, requiring re-optimizing the network while it is in operation. This thesis is devoted to devise new algorithms to solve in-operation network planning problems aiming at enhancing the performance of optical networks and at studying their feasibility in experimental environments. In-operation network planning requires from an architecture enabling the deployment of algorithms that must be solved in stringent times. That architecture can be based on a Path Computation Element (PCE) or a Software Defined Networks controller. In this thesis, we assume the former split in a front-end PCE, in charge of provisioning paths and handling network events, and a specialized planning tool in the form of a back-end PCE responsible for solving in-operation planning problems. After the architecture to support in-operation planning is assessed, we focus on studying the following applications: 1) Spectrum fragmentation is one of the most important problems in optical networks. To alleviate it to some extent without traffic disruption, we propose a hitless spectrum defragmentation strategy. 2) Each connection affected by a failure can be recovered using multiple paths to increase traffic restorability at the cost of poor resource utilization. We propose re-optimizing the network after repairing the failure to aggregate and reroute those connections to release spectral resources. 3) We study two approaches to provide multicast services: establishing a point-to-multipoint connections at the optical layer and using multi-purpose virtual network topologies (VNT) to serve both unicast and multicast connectivity requests. 4) The telecom cloud infrastructure, enables placing contents closer to the users. Based on it, we propose a hierarchical content distribution architecture where VNTs permanently interconnect core DCs and metro DCs periodically synchronize contents to the core DCs. 5) When the capacity of the optical backbone network becomes exhausted, we propose using a planning tool with access to inventory and operation databases to periodically decide the equipment and connectivity to be installed at the minimum cost reducing capacity overprovisioning. 6) In multi-domain multi-operator scenarios, a broker on top of the optical domains can provision multi-domain connections. We propose performing intra-domain spectrum defragmentation when no contiguous spectrum can be found for a new connection request. 7) Packet nodes belonging to a VNT can collect and send incoming traffic monitoring data to a big data repository. We propose using the collected data to predict next period traffic and to adapt the VNT to future conditions. The methodology followed in this thesis consists in proposing a problem statement and/or a mathematical formulation for the problems identified and then, devising algorithms for solving them. Those algorithms are simulated and then, they are experimentally assessed in real test-beds. This thesis demonstrates the feasibility of performing in-operation planning in optical networks, shows that it enhances the performance of the network and validates the feasibility of its deployment in real networks. It shall be mentioned that part of the work reported in this thesis has been done within the framework of several research projects, namely IDEALIST (FP7-ICT-2011-8) and GEANT (238875) funded by the EC and SYNERGY (TEC2014-59995-R) funded by the MINECO.Les aplicacions de nova generació, com ara el cloud computing o la distribució de vídeo, es poden executar a infraestructures de telecom cloud (TCI) on operadors integren els seus datacenters (DC) a les seves xarxes. Aquestes aplicacions fan que incrementi tant la dinamicitat de les connexions, com la variabilitat de les seves capacitats en el temps, arribant a canviar de direcció al llarg del dia. Llavors, cal disposar de tecnologies òptiques flexibles, tals com flexgrid, que suportin aquesta dinamicitat a les connexions. Aquesta dinamicitat pot degradar el rendiment de la xarxa, obligant a re-optimitzar-la mentre és en operació. Aquesta tesis està dedicada a idear nous algorismes per a resoldre problemes de planificació sobre xarxes en operació (in-operation network planning) per millorar el rendiment de les xarxes òptiques i a estudiar la seva factibilitat en entorns experimentals. Aquests problemes requereixen d’una arquitectura que permeti desplegar algorismes que donin solucions en temps restrictius. L’arquitectura pot estar basada en un Element de Computació de Rutes (PCE) o en un controlador de Xarxes Definides per Software. En aquesta tesis, assumim un PCE principal encarregat d’aprovisionar rutes i gestionar esdeveniments de la xarxa, i una eina de planificació especialitzada en forma de PCE de suport per resoldre problemes d’in-operation planning. Un cop validada l’arquitectura que dona suport a in-operation planning, estudiarem les següents aplicacions: 1) La fragmentació d’espectre és un dels principals problemes a les xarxes òptiques. Proposem reduir-la en certa mesura, fent servir una estratègia que no afecta al tràfic durant la desfragmentació. 2) Cada connexió afectada per una fallada pot ser recuperada fent servir múltiples rutes incrementant la restaurabilitat de la xarxa, tot i empitjorar-ne la utilització de recursos. Proposem re-optimitzar la xarxa després de reparar una fallada per agregar i re-enrutar aquestes connexions tractant d’alliberar recursos espectrals. 3) Estudiem dues solucions per aprovisionar serveis multicast: establir connexions punt-a-multipunt sobre la xarxa òptica i utilitzar Virtual Network Topologies (VNT) multi-propòsit per a servir peticions de connectivitat tant unicast com multicast. 4) La TCI permet mantenir els continguts a prop dels usuaris. Proposem una arquitectura jeràrquica de distribució de continguts basada en la TCI, on els DC principals s’interconnecten per mitjà de VNTs permanents i els DCs metropolitans periòdicament sincronitzen continguts amb els principals. 5) Quan la capacitat de la xarxa òptica s’exhaureix, proposem utilitzar una eina de planificació amb accés a bases de dades d’inventari i operacionals per decidir periòdicament l’equipament i connectivitats a instal·lar al mínim cost i reduir el sobre-aprovisionament de capacitat. 6) En entorns multi-domini multi-operador, un broker per sobre dels dominis òptics pot aprovisionar connexions multi-domini. Proposem aplicar desfragmentació d’espectre intra-domini quan no es pot trobar espectre contigu per a noves peticions de connexió. 7) Els nodes d’una VNT poden recollir i enviar informació de monitorització de tràfic entrant a un repositori de big data. Proposem utilitzar aquesta informació per adaptar la VNT per a futures condicions. La metodologia que hem seguit en aquesta tesis consisteix en formalitzar matemàticament els problemes un cop aquests son identificats i, després, idear algorismes per a resoldre’ls. Aquests algorismes son simulats i finalment validats experimentalment en entorns reals. Aquesta tesis demostra la factibilitat d’implementar mecanismes d’in-operation planning en xarxes òptiques, mostra els beneficis que aquests aporten i valida la seva aplicabilitat en xarxes reals. Part del treball presentat en aquesta tesis ha estat dut a terme en el marc dels projectes de recerca IDEALIST (FP7-ICT-2011-8) i GEANT (238875), finançats per la CE, i SYNERGY (TEC2014-59995-R), finançat per el MINECO.Postprint (published version

Computation of Dispersion Penalty for the Analysis of WDM Link Quality

The provisioning of light path over WDM/DWDM network is a challenging factor, which depends on various physical layer impairments such as dispersion in fiber. We proposed a light path provisioning mechanism by considering the effect of dispersion in fiber termed as dispersion penalty, which is the prominent effect at high speed WDM network. In the case of non-ideal filter, light path provisioning without considering the physical layer impairments does not satisfy the signal quality guaranteed transmission. In this algorithm, Quality of Service is described in terms of dispersion penalty values with an assumption that the entire client has a requirement of penalty less than 2 Db. Here we have analyzed the degradation in bit rate due to the effect of dispersion. The maximum possible length of fiber is also reduced due to high dispersion in fiber. Dispersion penalty is the increment in the received power to eliminate the effect of some undesirable distortion in optical fiber. Dispersion penalty is calculated in terms of bit rate and band width for each data path. The proposal of dispersion penalty budgeting is to ensure that the optical power reaching the receiver is adequate under all circumstances. The proposed algorithm defines a mechanism for effective light path provisioning by comparing the requirement of client and the available resources of the network