Viewfinder: final activity report

The VIEW-FINDER project (2006-2009) is an 'Advanced Robotics' project that seeks to apply a semi-autonomous robotic system to inspect ground safety in the event of a fire. Its primary aim is to gather data (visual and chemical) in order to assist rescue personnel. A base station combines the gathered information with information retrieved from off-site sources. The project addresses key issues related to map building and reconstruction, interfacing local command information with external sources, human-robot interfaces and semi-autonomous robot navigation. The VIEW-FINDER system is a semi-autonomous; the individual robot-sensors operate autonomously within the limits of the task assigned to them, that is, they will autonomously navigate through and inspect an area. Human operators monitor their operations and send high level task requests as well as low level commands through the interface to any nodes in the entire system. The human interface has to ensure the human supervisor and human interveners are provided a reduced but good and relevant overview of the ground and the robots and human rescue workers therein

Overcoming barriers and increasing independence: service robots for elderly and disabled people

This paper discusses the potential for service robots to overcome barriers and increase independence of elderly and disabled people. It includes a brief overview of the existing uses of service robots by disabled and elderly people and advances in technology which will make new uses possible and provides suggestions for some of these new applications. The paper also considers the design and other conditions to be met for user acceptance. It also discusses the complementarity of assistive service robots and personal assistance and considers the types of applications and users for which service robots are and are not suitable

Automation and robotics for the Space Exploration Initiative: Results from Project Outreach

A total of 52 submissions were received in the Automation and Robotics (A&R) area during Project Outreach. About half of the submissions (24) contained concepts that were judged to have high utility for the Space Exploration Initiative (SEI) and were analyzed further by the robotics panel. These 24 submissions are analyzed here. Three types of robots were proposed in the high scoring submissions: structured task robots (STRs), teleoperated robots (TORs), and surface exploration robots. Several advanced TOR control interface technologies were proposed in the submissions. Many A&R concepts or potential standards were presented or alluded to by the submitters, but few specific technologies or systems were suggested

Robots learn to behave: improving human-robot collaboration in flexible manufacturing applications

L'abstract è presente nell'allegato / the abstract is in the attachmen

Migration from Teleoperation to Autonomy via Modular Sensor and Mobility Bricks

In this thesis, the teleoperated communications of a Remotec ANDROS robot have been reverse engineered. This research has used the information acquired through the reverse engineering process to enhance the teleoperation and add intelligence to the initially automated robot. The main contribution of this thesis is the implementation of the mobility brick paradigm, which enables autonomous operations, using the commercial teleoperated ANDROS platform. The brick paradigm is a generalized architecture for a modular approach to robotics. This architecture and the contribution of this thesis are a paradigm shift from the proprietary commercial models that exist today. The modular system of sensor bricks integrates the transformed mobility platform and defines it as a mobility brick. In the wall following application implemented in this work, the mobile robotic system acquires intelligence using the range sensor brick. This application illustrates a way to alleviate the burden on the human operator and delegate certain tasks to the robot. Wall following is one among several examples of giving a degree of autonomy to an essentially teleoperated robot through the Sensor Brick System. Indeed once the proprietary robot has been altered into a mobility brick; the possibilities for autonomy are numerous and vary with different sensor bricks. The autonomous system implemented is not a fixed-application robot but rather a non-specific autonomy capable platform. Meanwhile the native controller and the computer-interfaced teleoperation are still available when necessary. Rather than trading off by switching from teleoperation to autonomy, this system provides the flexibility to switch between the two at the operator’s command. The contributions of this thesis reside in the reverse engineering of the original robot, its upgrade to a computer-interfaced teleoperated system, the mobility brick paradigm and the addition of autonomy capabilities. The application of a robot autonomously following a wall is subsequently implemented, tested and analyzed in this work. The analysis provides the programmer with information on controlling the robot and launching the autonomous function. The results are conclusive and open up the possibilities for a variety of autonomous applications for mobility platforms using modular sensor bricks

An overview of robotics and autonomous systems for harsh environments

Across a wide range of industries and applications, robotics and autonomous systems can fulfil the crucial and challenging tasks such as inspection, exploration, monitoring, drilling, sampling and mapping in areas of scientific discovery, disaster prevention, human rescue and infrastructure management, etc. However, in many situations, the associated environment is either too dangerous or inaccessible to humans. Hence, a wide range of robots have been developed and deployed to replace or aid humans in these activities. A look at these harsh environment applications of robotics demonstrate the diversity of technologies developed. This paper reviews some key application areas of robotics that involve interactions with harsh environments (such as search and rescue, space exploration, and deep-sea operations), gives an overview of the developed technologies and provides a discussion of the key trends and future directions common to many of these areas

Human-robot Interaction For Multi-robot Systems

Designing an effective human-robot interaction paradigm is particularly important for complex tasks such as multi-robot manipulation that require the human and robot to work together in a tightly coupled fashion. Although increasing the number of robots can expand the area that the robots can cover within a bounded period of time, a poor human-robot interface will ultimately compromise the performance of the team of robots. However, introducing a human operator to the team of robots, does not automatically improve performance due to the difficulty of teleoperating mobile robots with manipulators. The human operator’s concentration is divided not only among multiple robots but also between controlling each robot’s base and arm. This complexity substantially increases the potential neglect time, since the operator’s inability to effectively attend to each robot during a critical phase of the task leads to a significant degradation in task performance. There are several proven paradigms for increasing the efficacy of human-robot interaction: 1) multimodal interfaces in which the user controls the robots using voice and gesture; 2) configurable interfaces which allow the user to create new commands by demonstrating them; 3) adaptive interfaces which reduce the operator’s workload as necessary through increasing robot autonomy. This dissertation presents an evaluation of the relative benefits of different types of user interfaces for multi-robot systems composed of robots with wheeled bases and three degree of freedom arms. It describes a design for constructing low-cost multi-robot manipulation systems from off the shelf parts. User expertise was measured along three axes (navigation, manipulation, and coordination), and participants who performed above threshold on two out of three dimensions on a calibration task were rated as expert. Our experiments reveal that the relative expertise of the user was the key determinant of the best performing interface paradigm for that user, indicating that good user modiii eling is essential for designing a human-robot interaction system that will be used for an extended period of time. The contributions of the dissertation include: 1) a model for detecting operator distraction from robot motion trajectories; 2) adjustable autonomy paradigms for reducing operator workload; 3) a method for creating coordinated multi-robot behaviors from demonstrations with a single robot; 4) a user modeling approach for identifying expert-novice differences from short teleoperation traces

An intelligent, free-flying robot

The ground based demonstration of the extensive extravehicular activity (EVA) Retriever, a voice-supervised, intelligent, free flying robot, is designed to evaluate the capability to retrieve objects (astronauts, equipment, and tools) which have accidentally separated from the Space Station. The major objective of the EVA Retriever Project is to design, develop, and evaluate an integrated robotic hardware and on-board software system which autonomously: (1) performs system activation and check-out; (2) searches for and acquires the target; (3) plans and executes a rendezvous while continuously tracking the target; (4) avoids stationary and moving obstacles; (5) reaches for and grapples the target; (6) returns to transfer the object; and (7) returns to base