Eddy current damper

A high torque capacity eddy current damper used as a rate limiting device for a large solar array deployment mechanism is discussed. The eddy current damper eliminates the problems associated with the outgassing or leaking of damping fluids. It also provides performance advantages such as damping torque rates, which are truly linear with respect to input speed, continuous 360 degree operation in both directions of rotation, wide operating temperature range, and the capability of convenient adjustment of damping rates by the user without disassembly or special tools

Isotopic Fingerprinting of Shallow and Deep Groundwaters in Southwestern Ontario and its Applications to Abandoned Well Remediation

Abandoned hydrocarbon wells in southwestern Ontario can act as conduits for Sulphur water, brines, and hydrocarbons from deep Paleozoic bedrock aquifers. Such leakage may pose a threat to shallow groundwater and the environment. Cost-effective plugging of these wells requires knowledge of the sources of the leaking fluids. This study characterizes the isotopic compositions (δ18OH2O, δ2HH2O, δ34SSO4, δ18OSO4, δ13CDIC, 87Sr/86Sr) of groundwaters in the region, which are distinct in different bedrock formations. A Bayesian mixing model was applied to these data to develop a tool for identifying the source(s) of leaking fluids. The geochemical data also improve our understanding of groundwater origin and evolution. Shallow (~\u3c350m) aquifers are recharged by recent meteoric water. At greater depths, brine aquifers contain residual evaporated Paleozoic seawater, modified by rock-water interaction and mixing with meteoric water. These brines are likely related to long-distance fluid migration from deeper portions of the adjacent Michigan and Appalachian basins

Shear-dependent apparent slip on hydrophobic surfaces: The Mattress Model

Recent experiments (Zhu & Granick (2001) Phys. Rev. Lett. 87 096105) have measured a large shear dependent fluid slip at partially wetting fluid-solid surfaces. We present a simple model for such slip, motivated by the recent observations of nanobubbles on hydrophobic surfaces. The model considers the dynamic response of bubbles to change in hydrodynamic pressure due to the oscillation of a solid surface. Both the compression and diffusion of gas in the bubbles decrease the force on the oscillating surface by a ``leaking mattress'' effect, thereby creating an apparent shear-dependent slip. With bubbles similar to those observed by atomic force microscopy to date, the model is found to lead to force decreases consistent with the experimental measurements of Zhu & Granick

Dual diaphragm tank with telltale drain

A fluid storage and expulsion system comprising a tank with an internal flexible diaphragm assembly of dual diaphragms in back-to-back relationship, at least one of which is provided with a patterned surface having fine edges such that the diaphragms are in contact along said edges without mating contact of surface areas to thereby form fluid channels which extend outwardly to the peripheral edges of the diaphragms is described. The interior wall of the tank at the juncture of tank sections is formed with a circumferential annular recess comprising an outer annular recess portion which forms a fluid collection chamber and an inner annular recess portion which accommodates the peripheral edge portions of the diaphragms and a sealing ring in clamped sealing relation therebetween. The sealing ring is perforated with radially extending passages which allow any fluid leaking or diffusing past a diaphragm to flow through the fluid channels between the diaphragms to the fluid collection chamber. Ports connectable to pressure fittings are provided in the tank sections for admission of fluids to opposite sides of the diaphragm assembly. A drain passage through the tank wall to the fluid collection chamber permits detection, analysis and removal of fluids in the collection chamber

Method and apparatus for detection and location of microleaks Patent

Microleak detector mounted on weld seam of propellant tank of launch vehicl

Use of a porous membrane for gas bubble removal in microfluidic channels: physical mechanisms and design criteria

We demonstrate and explain a simple and efficient way to remove gas bubbles from liquid-filled microchannels, by integrating a hydrophobic porous membrane on top of the microchannel. A prototype chip is manufactured in hard, transparent polymer with the ability to completely filter gas plugs out of a segmented flow at rates up to 7.4 microliter/s per mm2 of membrane area. The device involves a bubble generation section and a gas removal section. In the bubble generation section, a T-junction is used to generate a train of gas plugs into a water stream. These gas plugs are then transported towards the gas removal section, where they slide along a hydrophobic membrane until complete removal. The system has been successfully modeled and four necessary operating criteria have been determined to achieve a complete separation of the gas from the liquid. The first criterion is that the bubble length needs to be larger than the channel diameter. The second criterion is that the gas plug should stay on the membrane for a time sufficient to transport all the gas through the membrane. The third criterion is that the gas plug travel speed should be lower than a critical value: otherwise a stable liquid film between the bubble and the membrane prevents mass transfer. The fourth criterion is that the pressure difference across the membrane should not be larger than the Laplace pressure to prevent water from leaking through the membrane

Mechanistic modeling of CO2 well leakage in a generic abandoned well through a bridge plug cement-casing gap

Both known and unmapped plugged and abandoned wells are potential leakage pathways for CO2 from geologic carbon sequestration (GCS) sites. Although many abandoned wells have cement bridge plugs installed to prevent leakage, the seal between the cement and the inner casing wall is subject to failure. In this study, we carried out detailed T2Well simulations of cases of sudden non-Darcy flow of CO2 and brine leakage up the gap between a cement plug and the inner steel casing wall that becomes a fully connected flow path during the post-injection period. The goal of our study was two-fold: (1) to understand the dynamics, rates, and the characteristic temporal signals associated with the onset of leakage through various gap-aperture sizes, and (2) to suggest potential monitoring strategies based on the findings. Simulation results show that the leakage of CO2 and brine upward is transient with interesting phase interference behavior. Time-dependent oscillatory flows with varying pressure, temperature, and flow rates of CO2 and brine show strong dependence on gap aperture. Phase-change and decompression lead to very low temperatures at the top of the well for gap apertures larger than 4 mm suggesting that remote thermal monitoring at the ground surface may be an effective way of monitoring even if well locations are not known a priori. Pressure in the well is also indicative of CO2 leakage. The temporal patterns of changing temperature and pressure may be useful diagnostic signals for leakage detection. Finally, these transient leakage signals may provide information on the cause of leakage and/or characteristics of the flow path that could inform effective remediation design and execution approaches

Leakage performance of a novel turbomachinery shaft seal

Advanced sealing systems are needed to control parasitic leakage flows to achieve high turbine engine efficiency and low emissions. Typical extreme turbomachinery engine operating conditions when combined rotor excursions do not lend simple sealing solutions. This work presents an in-depth analysis of a novel robust yet simple sealing system that is capable of maintaining long life under high speed and high temperature operating conditions. The proposed seal design is actually a gas bearing that is carefully tailored, analyzed, and designed to function as a differential pressure seal. The design involves a simple rigid/semi-flexible seal ring that is attached to a stationary support plate via flexible metal cloth structure. The seal body is capable of moving under the effect of hydrodynamic lift force. Therefore, above a certain clearance limit, which ensures that asperity contact is avoided, the seal follows shaft excursions to avoid damaging hard rubs

Chemseal 3808-A2 penetration into small leak path

A possible fix to a leak in the oxidizer system of the Space Shuttle Discovery's attitude control system was proposed by MSFC. This fix involved the passing of a shuttlecock past the leaking Dynaflow fitting and sealing the vent tube containing the fitting with Chemseal 3808-A2. The question of whether the Chemseal 3808-A2 can flow into the leak path and provide a better seal was addressed analytically and by experiment to verify the analytical formula used. The results show that the equations are applicable and that the Chemseal will flow into the expected leak path and seal