Impact detection techniques using fibre-optic sensors for aerospace & defence

Impact detection techniques are developed for application in the aerospace and defence industries. Optical fibre sensors hold great promise for structural health monitoring systems and methods of interrogating fibre Bragg gratings (FBG) are investigated given the need for dynamic strain capture and multiplexed sensors. An arrayed waveguide grating based interrogator is developed. The relationships between key performance indicators, such as strain range and linearity of response, and parameters such as the FBG length and spectral width are determined. It was found that the inclusion of a semiconductor optical amplifier could increase the signal-to-noise ratio by ~300% as the system moves to its least sensitive. An alternative interrogator is investigated utilising two wave mixing in erbium-doped fibre in order to create an adaptive system insensitive to quasistatic strain and temperature drifts. Dynamic strain sensing was demonstrated at 200 Hz which remained functional while undergoing a temperature shift of 8.5 °C. In addition, software techniques are investigated for locating impact events on a curved composite structure using both time-of-flight triangulation and neural networks. A feature characteristic of composite damage creation is identified in dynamic signals captured during impact. An algorithm is developed which successfully distinguishes between signals characteristic of a non-damaging impact with those from a damaging impact with a classification accuracy of 93 – 96%. Finally, a demonstrator system is produced to exhibit some of the techniques developed in this thesis

Large-scale remotely interrogated arrays of fibre-optic interferometric sensors and fibre lasers

Abstract unavailable please refer to PD

Distributed Fiber Ultrasonic Sensor and Pattern Recognition Analytics

Ultrasound interrogation and structural health monitoring technologies have found a wide array of applications in the health care, aerospace, automobile, and energy sectors. To achieve high spatial resolution, large array electrical transducers have been used in these applications to harness sufficient data for both monitoring and diagnoses. Electronic-based sensors have been the standard technology for ultrasonic detection, which are often expensive and cumbersome for use in large scale deployments. Fiber optical sensors have advantageous characteristics of smaller cross-sectional area, humidity-resistance, immunity to electromagnetic interference, as well as compatibility with telemetry and telecommunications applications, which make them attractive alternatives for use as ultrasonic sensors. A unique trait of fiber sensors is its ability to perform distributed acoustic measurements to achieve high spatial resolution detection using a single fiber. Using ultrafast laser direct-writing techniques, nano-reflectors can be induced inside fiber cores to drastically improve the signal-to-noise ratio of distributed fiber sensors. This dissertation explores the applications of laser-fabricated nano-reflectors in optical fiber cores for both multi-point intrinsic Fabry–Perot (FP) interferometer sensors and a distributed phase-sensitive optical time-domain reflectometry (φ-OTDR) to be used in ultrasound detection. Multi-point intrinsic FP interferometer was based on swept-frequency interferometry with optoelectronic phase-locked loop that interrogated cascaded FP cavities to obtain ultrasound patterns. The ultrasound was demodulated through reassigned short time Fourier transform incorporating with maximum-energy ridges tracking. With tens of centimeters cavity length, this approach achieved 20kHz ultrasound detection that was finesse-insensitive, noise-free, high-sensitivity and multiplex-scalability. The use of φ-OTDR with enhanced Rayleigh backscattering compensated the deficiencies of low inherent signal-to-noise ratio (SNR). The dynamic strain between two adjacent nano-reflectors was extracted by using 3×3 coupler demodulation within Michelson interferometer. With an improvement of over 35 dB SNR, this was adequate for the recognition of the subtle differences in signals, such as footstep of human locomotion and abnormal acoustic echoes from pipeline corrosion. With the help of artificial intelligence in pattern recognition, high accuracy of events’ identification can be achieved in perimeter security and structural health monitoring, with further potential that can be harnessed using unsurprised learning

Controlling, storing and manipulating light using on-chip Brillouin scattering

The importance of optical signal processing techniques is growing rapidly in recent years due to the exponentially increasing demand for bandwidth, capacity and power efficiency in communications and computing. However, due to their bosonic nature photons do not interact with each other, unless there is a nonlinear medium mediating the interaction. One of the strongest nonlinear effects is the interaction of light waves, photons, with sound-waves, acoustic phonons, which is known as stimulated Brillouin scattering (SBS). This thesis experimentally investigates SBS in photonic chips. It is shown in this thesis that the fundamental interaction strength between light and sound waves can be tailored by using one-dimensional photonic bandgap structures, completely suppressing the effect or alternatively enhancing the interaction to form phase-locked Brillouin frequency combs. It was shown furthermore that efficiently generating SBS on-chip enables the generation of stable RF signals that are widely tunable in frequency. Finally, it is shown in this thesis that SBS enables the storage of light signals on a chip, one of the holy grails of all-optical signal processing. Delaying optical signals is of key importance in optical networks to enable synchronization, buffering, and rerouting. SBS enables large delays by resonantly transferring an optical signal to an acoustic wave, that travels five orders of magnitude slower and retrieving it after a certain storage time. It is demonstrated in this thesis that a Brillouin-based memory (BBM) technique allows storing amplitude and phase of optical data pulses and operate at multiple wavelengths with minimal cross-talk. Replenishing of the acoustic wave to overcome storage time limitations imposed by the lifetime of the acoustic wave as well as non-reciprocal light storage is also shown

Investigations towards the development of a novel multimodal fibre optic sensor for oil and gas applications.

Oil and gas (O&G) explorations are moving into deeper zones of earth, causing serious safety concerns. Hence, sensing of critical multiple parameters like high pressure, high temperature (HPHT), chemicals, etc., are required at longer distances. Traditional electrical sensors operate less effectively under these extreme environmental conditions and are susceptible to electromagnetic interference (EMI). Compared to electrical sensors, fibre optic sensors offer several advantages like immunity to EMI, electrical isolation, ability to operate in harsh environmental conditions and freedom from corrosion. Existing fibre optical sensors in the O&G industry, based on step index single mode fibres (SMF), offer limited performance, as they operate within a narrow wavelength window. A novel multimodal sensor configuration, based on photonic crystal fibre (PCF) and utilising a multiwavelength approach, is proposed for the first time for O&G applications. This thesis reports computational and experimental investigations into the new multimodal sensing methodology, integrating both optical phase-change and spectral-change based approaches, needed for multi-parameter sensing. It includes investigations to improve the signal-to-noise ratio (SNR) by enhancing the signal intensity attained through structural, material and positional optimisations of the sensors. Waveguide related, computational investigations on PCF were carried out on different fibre optic core-cladding structures, material infiltrations and material doping to improve the signal intensity from the multimodal sensors for better SNR. COMSOL Multiphysics simulations indicated that structural and material modifications of the PCF have significant effects on light propagation characteristics. The propagation characteristics of the PCF were improved by modifying the geometrical parameters, and microstructuring the fibre core and cladding. Studies carried out on liquid crystal PCF (LCPCF) identified its enhanced mode confinement characteristics and wavelength tenability features (from visible to near infrared), which can be utilised for multi-wavelength applications. Enhancing core refractive index of the PCF improved the electric field confinements and thereby the signal intensity. Doping rare earth elements into the PCF core increases its refractive index and also provides additional spectroscopic features (photoluminescence and Raman), leading to a scope for multi-point, multimodal sensors. Investigations were carried out on PCF-FBG (Fibre Bragg grating) hybrid configuration, analysing their capabilities for optical phase-change based, multipoint, multi-parameter sensing. Computational investigations were carried out using MATLAB software, to study the effect of various fibre grating parameters. These studies helped in improving understanding of the FBG reflectivity-bandwidth characteristics, for tuning the number of sensors that can be accommodated within the same sensing fibre and enhancing the reflected signal for improved SNR. A new approach of FBG sensor positioning has been experimentally evaluated, to improve its strain sensitivity for structural health monitoring (SHM) of O&G structures. Further, experimental investigations were carried out on FBGs for sensing multiple parameters like temperature, strain (both tensile and compressive) and acoustic signals. Various spectroscopic investigations were carried out to identify the scope of rare earth doping within the PCF for photoluminescence and Raman spectroscopy based multimodal sensors. Rare earth doped glasses (Tb, Dy, Yb, Er, Ce and Ho) were developed using melt-quench approach and excitation- photoluminescence emission studies were carried out. The studies identified that photoluminescence signal intensity increases with rare earth concentration up to an optimum value and it can be further improved by tuning the excitation source characteristics. Photoluminescence based temperature studies were carried out using the rare earth doped glasses to identify their suitability for O&G high temperature conditions. Raman spectroscopic investigations were carried out on rare earth (Tb) doped glasses, developed using both melt-quench and sol-gel based approaches. Effect of 785 nm laser excitation on Raman signatures and suitability of rare earth doped materials for fibre-based Raman distributed temperature sensing (DTS) were also studied. Finally, a novel multimodal fibre optic sensor configuration is proposed for the O&G applications, consisting of rare earth doped photonic crystal fibre integrating Bragg gratings and operating in multiple wavelength regimes in a multiplexed fashion. The integrated sensor combination is expected to overcome the limitations of existing sensors with regards to SNR, sensing range and multimodal sensing capability

Design and fabrication of customized fiber gratings to improve the interrogation of optical fiber sensors

[EN] Fiber grating sensors and devices have demonstrated outstanding capabilities in both telecommunications and sensing areas, due to their well-known advantageous characteristics. Therefore, one of the most important motivations lies in the potential of customized fiber gratings to be suitably employed for improving the interrogation process of optical fiber sensors and systems. This Ph.D. dissertation is focused on the study, design, fabrication and performance evaluation of customized fiber Bragg gratings (FBGs) and long period gratings (LPGs) with the double aim to present novel sensing technologies and to enhance the response of existing sensing systems. In this context, a technique based on time-frequency domain analysis has been studied and applied to interrogate different kind of FBGs-based sensors. The distribution of the central wavelength along the sensing structures has been demonstrated, based on a combination of frequency scanning of the interrogating optical pulse and optical time-domain reflectometry (OTDR), allowing the detection of spot events with good performance in terms of measurand resolution. Moreover, different customized FBGs have been interrogated using a technology inspired on the operation principle of microwave photonics (MWP) filters, enabling the detection of spot events using radio-frequency (RF) devices with modest bandwidth. The sensing capability of these technological platforms has been fruitfully employed for implementing a large scale quasi-distributed sensor, based on an array of cascaded FBGs. The potentiality of LPGs as fiber optic sensors has also been investigated in a new fashion, exploiting the potentials of MWP filtering techniques. Besides, a novel approach for simultaneous measurements based on a half-coated LPG has been proposed and demonstrated. Finally, the feasibility of FBGs as selective wavelength filters has been exploited in sensing applications; an alternative approach to improve the response and performance of Brillouin distributed fiber sensors has been studied and validated via experiments. The performance of the reported sensing platforms have been analyzed and evaluated so as to characterize their impact on the fiber sensing field and to ultimately identify the use of the most suitable technology depending on the processing task to be carried out and on the final goal to reach.[ES] Los sensores y dispositivos en fibra basados en redes de difracción han mostrado excepcionales capacidades en el ámbito de las telecomunicaciones y del sensado, gracias a sus excelentes propiedades. Entre las motivaciones más estimulantes destaca la posibilidad de fabricar redes de difracción ad-hoc para implementar y/o mejorar las prestaciones de los sensores fotónicos. Esta tesis doctoral se ha enfocado en el estudio, diseño, fabricación y evaluación de las prestaciones de redes de difracción de Bragg (FBGs) y de redes de difracción de periodo largo (LPGs) personalizadas con el fin de desarrollar nuevas plataformas de detección y a la vez mejorar la respuesta y las prestaciones de los sensores fotónicos ya existentes. En este contexto, una técnica basada en el análisis tiempofrecuencia se ha estudiado e implementado para la interrogación de sensores en fibra basados en varios tipos y modelos de FBGs. Se ha analizado la distribución de la longitud de onda central a lo largo de la estructura de sensado, gracias a una metodología que conlleva el escaneo en frecuencia del pulso óptico incidente y la técnica conocida como reflectometria óptica en el dominio del tiempo (OTDR). De esta manera se ha llevado a cabo la detección de eventos puntuales, alcanzando muy buenas prestaciones en términos de resolución de la magnitud a medir. Además, se han interrogado varias FBGs a través de una técnica basada en el principio de operación de los filtros de fotónica de microondas (MWP), logrando así la detección de eventos puntuales usando dispositivos de radio-frecuencia (RF) caracterizados por un moderado ancho de banda. La capacidad de sensado de estas plataformas tecnológicas ha sido aprovechada para la realización de un sensor quasi-distribuido de gran alcance, formado por una estructura en cascada de muchas FBGs. Por otro lado, se han puesto a prueba las capacidades de las LPGs como sensores ópticos según un enfoque novedoso; para ello se han aprovechados las potencialidades de los filtros de MWP. Asimismo, se ha estudiado y demostrado un nuevo método para medidas simultáneas de dos parámetros, basado en una LPG parcialmente recubierta por una película polimérica. Finalmente, se ha explotado la viabilidad de las FBGs en cuanto al filtrado selectivo en longitud de onda para aplicaciones de sensado; para ello se ha propuesto un sistema alternativo para la mejora de la respuesta y de las prestaciones de sensores ópticos distribuidos basados en el scattering de Brillouin. En conclusión, se han analizado y evaluado las prestaciones de las plataformas de sensado propuestas para caracterizar su impacto en el ámbito de los sistemas de detección por fibra y además identificar el uso de la tecnología más adecuada dependiendo de la tarea a desarrollar y del objetivo a alcanzar.[CA] Els sensors i dispositius en fibra basats en xarxes de difracció han mostrat excepcionals capacitats en l'àmbit de les telecomunicacions i del sensat, gràcies a les seus excel¿lents propietats. Entre les motivacions més estimulants destaca la possibilitat de fabricar xarxes de difracció ad-hoc per a implementar i/o millorar les prestacions de sensors fotònics. Esta tesi doctoral s'ha enfocat en l'estudi, disseny, fabricació i avaluació de les prestacions de xarxes de difracció de Bragg (FBGs) i de xarxes de difracció de període llarg (LPGs) personalitzades per tal de desenvolupar noves plataformes de detecció i al mateix temps millorar la resposta i les prestacions dels sensors fotònics ja existents. En este context, una tècnica basada en l'anàlisi temps-freqüència s'ha estudiat i implementat per a la interrogació de sensors en fibra basats en diversos tipus i models de FBGs. S'ha analitzat la distribució de la longitud d'ona central al llarg de l'estructura de sensat, gràcies a una metodologia que comporta l'escaneig en freqüència del pols òptic incident i la tècnica coneguda com reflectometria òptica en el domini del temps (OTDR). D'esta manera s'ha dut a terme la detecció d'esdeveniments puntuals, aconseguint molt bones prestacions en termes de resolució de la magnitud a mesurar. A més, s'han interrogat diverses FBGs a través d'una tècnica basada en el principi d'operació dels filtres de fotònica de microones (MWP), aconseguint així la detecció d'esdeveniments puntuals utilitzant dispositius de ràdio-freqüència (RF) caracteritzats per un moderat ample de banda. La capacitat de sensat d'aquestes plataformes tecnològiques ha sigut aprofitada per a la realització d'un sensor quasi-distribuït a llarga escala, format per una estructura en cascada de moltes FBGs. D'altra banda, s'han posat a prova les capacitats de les LPGs com a sensors òptics segons un enfocament nou; per a això s'han aprofitat les potencialitats dels filtres de MWP. Així mateix, s'ha estudiat i demostrat un nou mètode per a mesures simultànies de dos paràmetres, basat en una LPG parcialment recoberta per una pel¿lícula polimèrica. Finalment, s'ha explotat la viabilitat de les FBGs pel que fa al filtrat selectiu en longitud d'ona per a aplicacions de sensat; per això s'ha proposat un sistema alternatiu per a la millora de la resposta i de les prestacions de sensors òptics distribuïts basats en el scattering de Brillouin. S'han analitzat i avaluat les prestacions de les plataformes de sensat propostes per a caracteritzar el seu impacte en l'àmbit dels sistemes de detecció per fibra i a més identificar l'ús de la tecnologia més adequada depenent de la tasca a desenvolupar i de l'objectiu a assolir.Ricchiuti, AL. (2016). Design and fabrication of customized fiber gratings to improve the interrogation of optical fiber sensors [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/66343TESISPremiad