Vehicle detection and tracking using homography-based plane rectification and particle filtering

This paper presents a full system for vehicle detection and tracking in non-stationary settings based on computer vision. The method proposed for vehicle detection exploits the geometrical relations between the elements in the scene so that moving objects (i.e., vehicles) can be detected by analyzing motion parallax. Namely, the homography of the road plane between successive images is computed. Most remarkably, a novel probabilistic framework based on Kalman filtering is presented for reliable and accurate homography estimation. The estimated homography is used for image alignment, which in turn allows to detect the moving vehicles in the image. Tracking of vehicles is performed on the basis of a multidimensional particle filter, which also manages the exit and entries of objects. The filter involves a mixture likelihood model that allows a better adaptation of the particles to the observed measurements. The system is specially designed for highway environments, where it has been proven to yield excellent results

DeepDriving: Learning Affordance for Direct Perception in Autonomous Driving

Today, there are two major paradigms for vision-based autonomous driving systems: mediated perception approaches that parse an entire scene to make a driving decision, and behavior reflex approaches that directly map an input image to a driving action by a regressor. In this paper, we propose a third paradigm: a direct perception approach to estimate the affordance for driving. We propose to map an input image to a small number of key perception indicators that directly relate to the affordance of a road/traffic state for driving. Our representation provides a set of compact yet complete descriptions of the scene to enable a simple controller to drive autonomously. Falling in between the two extremes of mediated perception and behavior reflex, we argue that our direct perception representation provides the right level of abstraction. To demonstrate this, we train a deep Convolutional Neural Network using recording from 12 hours of human driving in a video game and show that our model can work well to drive a car in a very diverse set of virtual environments. We also train a model for car distance estimation on the KITTI dataset. Results show that our direct perception approach can generalize well to real driving images. Source code and data are available on our project website

Video analysis based vehicle detection and tracking using an MCMC sampling framework

This article presents a probabilistic method for vehicle detection and tracking through the analysis of monocular images obtained from a vehicle-mounted camera. The method is designed to address the main shortcomings of traditional particle filtering approaches, namely Bayesian methods based on importance sampling, for use in traffic environments. These methods do not scale well when the dimensionality of the feature space grows, which creates significant limitations when tracking multiple objects. Alternatively, the proposed method is based on a Markov chain Monte Carlo (MCMC) approach, which allows efficient sampling of the feature space. The method involves important contributions in both the motion and the observation models of the tracker. Indeed, as opposed to particle filter-based tracking methods in the literature, which typically resort to observation models based on appearance or template matching, in this study a likelihood model that combines appearance analysis with information from motion parallax is introduced. Regarding the motion model, a new interaction treatment is defined based on Markov random fields (MRF) that allows for the handling of possible inter-dependencies in vehicle trajectories. As for vehicle detection, the method relies on a supervised classification stage using support vector machines (SVM). The contribution in this field is twofold. First, a new descriptor based on the analysis of gradient orientations in concentric rectangles is dened. This descriptor involves a much smaller feature space compared to traditional descriptors, which are too costly for real-time applications. Second, a new vehicle image database is generated to train the SVM and made public. The proposed vehicle detection and tracking method is proven to outperform existing methods and to successfully handle challenging situations in the test sequences

Truck height determination using digital video

Over-height trucks are not only a hazard to the over-height trucks themselves, but they pose a threat to the bridges they come into contact with, and most importantly the other drivers on the road way when a collision takes place with a low clearance structure. Therefore, there is a need for an over-height detection system that is affordable yet also reliable. At this time there exist over-height detection systems using laser and infrared beam devices however, they are expensive. This high cost makes it impossible for Department of Transportations across the nation to implement these systems at all low-clearance headroom roadways. In this research a machine vision based system is proposed to detect the height of trucks and provide a warning for over-height vehicles. The height determination will be completed using line detection and blob tracking; these two methods will be overlapped where an upper point of the truck can be compared to a lower point on the ground. These 2D coordinates will then be translated into 3D world coordinates that will provide an approximation of the truck height. If the truck is over the set height then a warning will sound. The accuracy of the test proves that the method is a reliable method of height determination, achieving a 96.59% accuracy rate for measured trucks. The method does have an error rate of 3.3%. The merit of this work is the creation of an automatic image based method which can provide height determination of trucks and is a low cost alternative to the current expensive laser and infrared detection systems.MSCommittee Chair: Brilakis, Ioannis ; Committee Member: Hunter, Michael; Committee Member: Laval, Jorg

Automatic segmentation and reconstruction of traffic accident scenarios from mobile laser scanning data

Virtual reconstruction of historic sites, planning of restorations and attachments of new building parts, as well as forest inventory are few examples of fields that benefit from the application of 3D surveying data. Originally using 2D photo based documentation and manual distance measurements, the 3D information obtained from multi camera and laser scanning systems realizes a noticeable improvement regarding the surveying times and the amount of generated 3D information. The 3D data allows a detailed post processing and better visualization of all relevant spatial information. Yet, for the extraction of the required information from the raw scan data and for the generation of useable visual output, time-consuming, complex user-based data processing is still required, using the commercially available 3D software tools. In this context, the automatic object recognition from 3D point cloud and depth data has been discussed in many different works. The developed tools and methods however, usually only focus on a certain kind of object or the detection of learned invariant surface shapes. Although the resulting methods are applicable for certain practices of data segmentation, they are not necessarily suitable for arbitrary tasks due to the varying requirements of the different fields of research. This thesis presents a more widespread solution for automatic scene reconstruction from 3D point clouds, targeting street scenarios, specifically for the task of traffic accident scene analysis and documentation. The data, obtained by sampling the scene using a mobile scanning system is evaluated, segmented, and finally used to generate detailed 3D information of the scanned environment. To realize this aim, this work adapts and validates various existing approaches on laser scan segmentation regarding the application on accident relevant scene information, including road surfaces and markings, vehicles, walls, trees and other salient objects. The approaches are therefore evaluated regarding their suitability and limitations for the given tasks, as well as for possibilities concerning the combined application together with other procedures. The obtained knowledge is used for the development of new algorithms and procedures to allow a satisfying segmentation and reconstruction of the scene, corresponding to the available sampling densities and precisions. Besides the segmentation of the point cloud data, this thesis presents different visualization and reconstruction methods to achieve a wider range of possible applications of the developed system for data export and utilization in different third party software tools

Visual computing techniques for automated LIDAR annotation with application to intelligent transport systems

106 p.The concept of Intelligent Transport Systems (ITS) refers to the application of communication and information technologies to transport with the aim of making it more efficient, sustainable, and safer. Computer vision is increasingly being used for ITS applications, such as infrastructure management or advanced driver-assistance systems. The latest progress in computer vision, thanks to the Deep Learning techniques, and the race for autonomous vehicle, have created a growing requirement for annotated data in the automotive industry. The data to be annotated is composed by images captured by the cameras of the vehicles and LIDAR data in the form of point clouds. LIDAR sensors are used for tasks such as object detection and localization. The capacity of LIDAR sensors to identify objects at long distances and to provide estimations of their distance make them very appealing sensors for autonomous driving.This thesis presents a method to automate the annotation of lane markings with LIDAR data. The state of the art of lane markings detection based on LIDAR data is reviewed and a novel method is presented. The precision of the method is evaluated against manually annotated data. Its usefulness is also evaluated, measuring the reduction of the required time to annotate new data thanks to the automatically generated pre-annotations. Finally, the conclusions of this thesis and possible future research lines are presented