11,739 research outputs found

    Fault estimation and active fault tolerant control for linear parameter varying descriptor systems

    Get PDF
    Starting with the baseline controller design, this paper proposes an integrated approach of active fault tolerant control based on proportional derivative extended state observer (PDESO) for linear parameter varying descriptor systems. The PDESO can simultaneously provide the estimates of the system states, sensor faults, and actuator faults. The Lâ‚‚ robust performance of the closed-loop system to bounded exogenous disturbance and bounded uncertainty is achieved by a two-step design procedure adapted from the traditional observer-based controller design. Furthermore, an LMI pole-placement region and the Lâ‚‚ robustness performance are combined into a multiobjective formulation by suitably combing the appropriate LMI descriptions. A parameter-varying system example is given to illustrate the design procedure and the validity of the proposed integrated design approach

    Decentralized sliding mode control and estimation for large-scale systems

    Get PDF
    This thesis concerns the development of an approach of decentralised robust control and estimation for large scale systems (LSSs) using robust sliding mode control (SMC) and sliding mode observers (SMO) theory based on a linear matrix inequality (LMI) approach. A complete theory of decentralized first order sliding mode theory is developed. The main developments proposed in this thesis are: The novel development of an LMI approach to decentralized state feedback SMC. The proposed strategy has good ability in combination with other robust methods to fulfill specific performance and robustness requirements. The development of output based SMC for large scale systems (LSSs). Three types of novel decentralized output feedback SMC methods have been developed using LMI design tools. In contrast to more conventional approaches to SMC design the use of some complicated transformations have been obviated. A decentralized approach to SMO theory has been developed focused on the Walcott-Żak SMO combined with LMI tools. A derivation for bounds applicable to the estimation error for decentralized systems has been given that involves unknown subsystem interactions and modeling uncertainty. Strategies for both actuator and sensor fault estimation using decentralized SMO are discussed.The thesis also provides a case study of the SMC and SMO concepts applied to a non-linear annealing furnace system modelderived from a distributed parameter (partial differential equation) thermal system. The study commences with a lumped system decentralised representation of the furnace derived from the partial differential equations. The SMO and SMC methods derived in the thesis are applied to this lumped parameter furnace model. Results are given demonstrating the validity of the methods proposed and showing a good potential for a valuable practical implementation of fault tolerant control based on furnace temperature sensor faults

    Robust H2 static output feedback to control an autmomotive throttle valve

    Get PDF
    The paper presents a control strategy for an automotive electronic throttle body, a device largely used into vehicles to increase the efficiency of the combustion engines. The synthesis of the proposed controller is based on a linear matrix inequality (LMI) formulation, which allows us to deal with uncertainties on the measurements of the position of the throttle valve. The LMI approach generates a suboptimal solution for the robust H-2 static output feedback control problem, and the corresponding suboptimal control gain was evaluated in practice to control the valve position of the throttle. The usefulness of the approach has been verified not only by numerical simulations but also by real experiments taken in a laboratory prototype.Postprint (published version

    Multi-Objective Robust H-infinity Control of Spacecraft Rendezvous

    Get PDF
    Based on the relative motion dynamic model illustrated by C-W equations, the problem of robust Hinfin control for a class of spacecraft rendezvous systems is investigated, which contains parametric uncertainties, external disturbances and input constraints. An Hinfin state-feedback controller is designed via a Lyapunov approach, which guarantees the closed-loop system to meet the multi-objective design requirements. The existence conditions for admissible controllers are formulated in the form of linear matrix inequalities (LMIs), and the controller design is cast into a convex optimization problem subject to LMI constraints. An illustrative example is provided to show the effectiveness of the proposed control design method

    A Convex Optimization Approach to the Design of Multiobjective Discrete Time Systems

    Get PDF
    One of the most important contributions of robust control theory has been the devel opment of a new framework for the design and analysis of feedback systems satisfying mixed time-frequency specifications. This framework is given by the Linear Matrix Inequality (LMI) approach where design and analysis problems are posed as convex optimization problems subject to affine matrix constraints. Most of the focus in this area has been on continuous-time systems design with very few results for discretetime systems. One of the main contributions of this work is the development and implementation of a MATLAB toolbox for discrete-time controller design using the LMI approach. Another important contribution is the development of a new linear matrix inequality for peak-to-peak gain minimization that allows the use of projec tion formulas for l1-design. In order to illustrate the advantages and effectiveness of the LMI framework to multiobjective design problems it was applied to design a noise-shaping feedback coder. This nonlinear circuit is an important component of (Sigma) - (Delta) modulators. This work shows that a robust control approach based on LMIs provides a rigorous framework for the systematic analysis and design of these coders in contrast to existing ad hoc methods used traditionally for such designs

    Equivalence of robust stabilization and robust performance via feedback

    Full text link
    One approach to robust control for linear plants with structured uncertainty as well as for linear parameter-varying (LPV) plants (where the controller has on-line access to the varying plant parameters) is through linear-fractional-transformation (LFT) models. Control issues to be addressed by controller design in this formalism include robust stability and robust performance. Here robust performance is defined as the achievement of a uniform specified L2L^{2}-gain tolerance for a disturbance-to-error map combined with robust stability. By setting the disturbance and error channels equal to zero, it is clear that any criterion for robust performance also produces a criterion for robust stability. Counter-intuitively, as a consequence of the so-called Main Loop Theorem, application of a result on robust stability to a feedback configuration with an artificial full-block uncertainty operator added in feedback connection between the error and disturbance signals produces a result on robust performance. The main result here is that this performance-to-stabilization reduction principle must be handled with care for the case of dynamic feedback compensation: casual application of this principle leads to the solution of a physically uninteresting problem, where the controller is assumed to have access to the states in the artificially-added feedback loop. Application of the principle using a known more refined dynamic-control robust stability criterion, where the user is allowed to specify controller partial-state dimensions, leads to correct robust-performance results. These latter results involve rank conditions in addition to Linear Matrix Inequality (LMI) conditions.Comment: 20 page
    • …
    corecore