A low-cost time-hopping impulse radio system for high data rate transmission

We present an efficient, low-cost implementation of time-hopping impulse radio that fulfills the spectral mask mandated by the FCC and is suitable for high-data-rate, short-range communications. Key features are: (i) all-baseband implementation that obviates the need for passband components, (ii) symbol-rate (not chip rate) sampling, A/D conversion, and digital signal processing, (iii) fast acquisition due to novel search algorithms, (iv) spectral shaping that can be adapted to accommodate different spectrum regulations and interference environments. Computer simulations show that this system can provide 110Mbit/s at 7-10m distance, as well as higher data rates at shorter distances under FCC emissions limits. Due to the spreading concept of time-hopping impulse radio, the system can sustain multiple simultaneous users, and can suppress narrowband interference effectively.Comment: To appear in EURASIP Journal on Applied Signal Processing (Special Issue on UWB - State of the Art

Transceiver design and system optimization for ultra-wideband communications

This dissertation investigates the potential promises and proposes possible solutions to the challenges of designing transceivers and optimizing system parameters in ultra-wideband (UWB) systems. The goal is to provide guidelines for UWB transceiver implementations under constraints by regulation, existing interference, and channel estimation. New UWB pulse shapes are invented that satisfy the Federal Communications Commission spectral mask. Parameters are designed to possibly implement the proposed pulses. A link budget is quantified based on an accurate frequency-dependent path loss calculation to account for variations across the ultra-wide bandwidth of the signal. Achievable information rates are quantified as a function of transmission distance over additive white Gaussian noise and multipath channels under specific UWB constraints: limited power spectral density, specific modulation formats, and a highly dispersive channel. The effect of self-interference (SI) and inter-symbol interference (ISI) on channel capacity is determined, and modulation formats that mitigate against this effect is identified. Spreading gains of familiar UWB signaling formats are evaluated, and UWB signals are proved to be spread spectrum. Conditions are formulated for trading coding gain with spreading gain with only a small impact on performance. Numerical results are examined to demonstrate that over a frequency-selective channel, the spreading gain may be beneficial in reducing the SI and ISI resulting in higher information rates. A reduced-rank adaptive filtering technique is applied to the problem of interference suppression and optimum combining in UWB communications. The reduced-rank combining method, in particular the eigencanceler, is proposed and compared with a minimum mean square error Rake receiver. Simulation results are evaluated to show that the performance of the proposed method is superior to the minimum mean square error when the correlation matrix is estimated from limited data. Impact of channel estimation on UWB system performance is investigated when path delays and path amplitudes are jointly estimated. Cramér-Rao bound (CRB) expressions for the variance of path delay and amplitude estimates are formulated using maximum likelihood estimation. Using the errors obtained from the CRB, the effective signal-to-noise ratio for UWB Rake receivers employing maximum ratio combining (MRC) is devised in the presence of channel path delay and amplitude errors. An exact expression of the bit error rate (BER) for UWB Rake receivers with MRC is derived with imperfect estimates of channel path delays and amplitudes. Further, this analysis is applied to design optimal transceiver parameters. The BER is used as part of a binary symmetric channel and the achievable information rates are evaluated. The optimum power allocation and number of symbols allocated to the pilot are developed with respect to maximizing the information rate. The optimal signal bandwidth to be used for UWB communications is determined in the presence of imperfect channel state information. The number of multipath components to be collected by Rake receivers is designed to optimize performance with non-ideal channel estimation

A joint multi user detection scheme for UWB sensor networks using waveform division multiple access

A joint multiuser detection (MUD) scheme for wireless sensor networks (WSNs) is proposed to suppress multiple access interference (MAI) caused by a large number of sensor nodes. In WSNs, waveform division multiple access ultra-wideband (WDMA-UWB) technology is well-suited for robust communications. Multiple sensor nodes are allowed to transmit modulated signals by sharing the same time periods and frequency bands using orthogonal pulse waveforms. This paper employs a mapping function based on the optimal multiuser detection (OMD) to map the received bits into the mapping space where error bits can be distinguished. In order to revise error bits caused by MAI, the proposed joint MUD scheme combines the mapping function with suboptimal algorithms. Numerical results demonstrate that the proposed MUD scheme provides good performances in terms of suppressing MAI and resisting near-far effect with low computational complexity

Performance Evaluation of 802.15.4 UWB PHY for High Speed Data Rate under IEEE Channel Mode

In modern day society the increase of data generation and transfer has been an issue that researchers are working on. This generated and shared data might have a different purpose but one thing is certain, the reception. This communication can cover continents, countries, cities or even just a few meters. For the purpose of the later, personal area networks (PAN) have been created with a main focus to lower the energy consumption. The protocol that is created under IEEE is 802.15.4 and it has multiple applications in the context of next generation sensor networks. This thesis investigates the performance IEEE 802.15.4 UWB PHY for high data rates over IEEE multipath fading channels and introduces receivers aiming to diversity and to mitigate the intersymbol interference (ISI) that might appear. We simulate the protocols highest mandatory data rate over slow, block faded, realistic IEEE channel models such as, residential, office, outdoor and industrial. The simulation includes Reed Solomon (RS) channel coding, optimal successive erasure decoding (SED), and coherent RAKE receivers. We verify that the selective RAKE (sRAKE) perform better than the nonselective RAKE (n-sRAKE) in all environments and also the increase of fingers is mandatory in order to improve performance. In cases with low number of fingers the ISI mitigation techniques like Maximum-Likehood Sequence Estimator (MLSE) & RAKE combination or Maximum Ration Combining (MRC) ISI cancellation receivers, can provide some gain in large delay spread environments. In cases with high number of ingers the MRC received employs its full diversity since the received power is arger than before. Overall the apply of optimal errors and erasures decoding can urther improve the system performance by adding a small gain, lowering existing it Error Probability (BEP) even more.A huge percentage of data has been generated in the last two years and it will grow more, as every one of us is constantly producing and releasing data. The latest years has been an extensive research on capacity maximization, bit rate increment and power optimization. That research lead to the development of various protocols for cellular and personal area networks (PAN), where they each utilizes the frequency spectrum differently. Even if cellular networks have the ability to cover large area, development of multiple personal area networks can be developed for the purpose to offload data from the cellular network. Keeping in mind the research needs, 802.15.4 UWH PHY is a solid candidate when it comes to data transfer in a small area. This protocol offers various mandatory transmission modes that can be selected depending the channel parameters and various data rate needs. Time hopping and spreading sequence offers the existence of multiuser environment where multiple transceivers can co-exist. Overall the complexity, cost and energy consumption for transmission and reception can be kept low, matching the research needs. The main issues regarding 802.15.4 UWH PHY and high speed data rates is first, the energy dispersion of the transmitted symbol to multiple bins and second, the appearance of Inter Symbol Interference (ISI) in high delay profile environments. The solution in the former problem is the necessary implementation of a RAKE receiver. Regarding the latter, literature offers multiple ways to mitigate the ISI but the aim should be to keep the lowest complexity possible regarding the implementation. In this thesis we evaluate the performance of 802.15.4 UWB PHY for high speed data rates under IEEE channel models. Various receivers has been build for the purpose of this thesis, Maximum Ratio Combining (MRC), MRC with Inter Symbol Interference and MLSE & RAKE combination receiver. The MRC is a simple RAKE receiver with maximum diversity, MRC with ISI cancellation is based on the MRC receiver with the ability to mitigate ISI, and MLSE & RAKE combination is an optimum ISI mitigation receiver without the diversity of the MRC

Iterative multiuser detection for ultra-wideband systems

Master'sMASTER OF ENGINEERIN

A Statistical Analysis of Multipath Interference for Impulse Radio UWB Systems

In this paper, we develop a statistical characterization of the multipath interference in an Impulse Radio (IR)-UWB system, considering the standardized IEEE 802.15.4a channel model. In such systems, the chip length has to be carefully tuned as all the propagation paths located beyond this limit can cause interframe/intersymbol interferences (IFI/ISI). Our approach aims at computing the probability density function (PDF) of the power of all multipath components with delays larger than the chip time, so as to prevent such interferences. Exact analytical expressions are derived first for the probability that the chip length falls into a particular cluster of the multipath propagation model and for the statistics of the number of paths spread over several contiguous clusters. A power delay profile (PDP) approximation is then used to evaluate the total interference power as the problem appears to be mathematically intractable. Using the proposed closed-form expressions, and assuming minimal prior information on the channel state, a rapid update of the chip time value is enabled so as to control the signal to interference plus noise ratio.Comment: 17 pages, 9 figures; submitted to the Journal of the Franklin Institute on Sept. 24, 201

Impact of Metallic Furniture on UWB Channel Statistical Characteristics

[[abstract]]The bit error rate (BER) performance for ultra-wide band (UWB) indoor communication with the impact of metallic furniture is investigated. The impulse responses of different indoor environments for any transmitter and receiver location are computed by shooting and bouncing ray/image and inverse fast Fourier transform (IFFT) techniques. By using the impulse responses of these multi-path channels, the BER performance for binary pulse amplitude modulation (BPAM) impulse radio UWB communication system are calculated. Numerical results have shown that the multi-path effect by the metallic cabinets is an important factor for BER performance. Also the outage probability for the UWB multi-path environment with metallic cabinets is larger than that with wooden cabinets. Finally, it is worth noting that in these cases the present work provides not only comparative information but also quantitative information on the performance reduction.[[notice]]補正完畢[[incitationindex]]EI[[booktype]]紙