A survey on energy efficient techniques in wireless sensor networks

International audienceThe myriad of potential applications supported by wireless sensor networks (WSNs) has generated much interest from the research community. Various applications range from small size low industrial monitoring to large scale energy constrained environmental monitoring. In all cases, an operational network is required to fulfill the application missions. In addition, energy consumption of nodes is a great challenge in order to maximize network lifetime. Unlike other networks, it can be hazardous, very expensive or even impossible to charge or replace exhausted batteries due to the hostile nature of environment. Researchers are invited to design energy efficient protocols while achieving the desired network operations. This paper focuses on different techniques to reduce the consumption of the limited energy budget of sensor nodes. After having identified the reasons of energy waste in WSNs, we classify energy efficient techniques into five classes, namely data reduction, control reduction, energy efficient routing, duty cycling and topology control. We then detail each of them, presenting subdivisions and giving many examples. We conclude by a recapitulative table

Exploiting Addresses Correlation to Maximize Lifetime of IPv6 Cluster-based WSNs

International audienceImproving the network lifetime is an important design criterion for wireless sensor networks. To achieve this goal, we propose in this paper a novel approach which applies source-coding on addresses in heterogeneous IPv6 Cluster-based wireless sensor network. We formulate the problem of maximiz- ing the network lifetime when Slepian-wolf coding is applied on addresses in network composed of line-powered and battery- powered sensors. This problem optimizes the placement of line- powered sensors to enable the battery-powered ones to exploit the addresses correlation and reduce the size of their emitted packets and thus improve the network lifetime. The numerical results show that a significant network lifetime improvement can be achieved (about 25% in typical scenario)

Strengths and Weaknesses of Prominent Data Dissemination Techniques in Wireless Sensor Networks

Data dissemination is the most significant task in a Wireless Sensor Network (WSN). From the bootstrapping stage to the full functioning stage, a WSN must disseminate data in various patterns like from the sink to node, from node to sink, from node to node, or the like. This is what a WSN is deployed for. Hence, this issue comes with various data routing models and often there are different types of network settings that influence the way of data collection and/or distribution. Considering the importance of this issue, in this paper, we present a survey on various prominent data dissemination techniques in such network. Our classification of the existing works is based on two main parameters: the number of sink (single or multiple) and the nature of its movement (static or mobile). Under these categories, we have analyzed various previous works for their relative strengths and weaknesses. A comparison is also made based on the operational methods of various data dissemination schemes

Approach to minimizing consumption of energy in wireless sensor networks

The Wireless Sensor Networks (WSN) technology has benefited from a central position in the research space of future emerging networks by its diversity of applications fields and also by its optimization techniques of its various constraints, more essentially, the minimization of nodal energy consumption to increase the global network lifetime. To answer this saving energy problem, several solutions have been proposed at the protocol stack level of the WSN. In this paper, after presenting a state of the art of this technology and its conservation energy techniques at the protocol stack level, we were interested in the network layer to propose a routing solution based on a localization aspect that allows the creation of a virtual grid on the coverage area and introduces it to the two most well-known energy efficiency hierarchical routing protocols, LEACH and PEGASIS. This allowed us to minimize the energy consumption and to select the clusters heads in a deterministic way unlike LEACH which is done in a probabilistic way and also to minimize the latency in PEGASIS, by decomposing its chain into several independent chains. The simulation results, under "MATLABR2015b", have shown the efficiency of our approach in terms of overall residual energy and network lifetime

Robotic Wireless Sensor Networks

In this chapter, we present a literature survey of an emerging, cutting-edge, and multi-disciplinary field of research at the intersection of Robotics and Wireless Sensor Networks (WSN) which we refer to as Robotic Wireless Sensor Networks (RWSN). We define a RWSN as an autonomous networked multi-robot system that aims to achieve certain sensing goals while meeting and maintaining certain communication performance requirements, through cooperative control, learning and adaptation. While both of the component areas, i.e., Robotics and WSN, are very well-known and well-explored, there exist a whole set of new opportunities and research directions at the intersection of these two fields which are relatively or even completely unexplored. One such example would be the use of a set of robotic routers to set up a temporary communication path between a sender and a receiver that uses the controlled mobility to the advantage of packet routing. We find that there exist only a limited number of articles to be directly categorized as RWSN related works whereas there exist a range of articles in the robotics and the WSN literature that are also relevant to this new field of research. To connect the dots, we first identify the core problems and research trends related to RWSN such as connectivity, localization, routing, and robust flow of information. Next, we classify the existing research on RWSN as well as the relevant state-of-the-arts from robotics and WSN community according to the problems and trends identified in the first step. Lastly, we analyze what is missing in the existing literature, and identify topics that require more research attention in the future

An objective based classification of aggregation techniques for wireless sensor networks

Wireless Sensor Networks have gained immense popularity in recent years due to their ever increasing capabilities and wide range of critical applications. A huge body of research efforts has been dedicated to find ways to utilize limited resources of these sensor nodes in an efficient manner. One of the common ways to minimize energy consumption has been aggregation of input data. We note that every aggregation technique has an improvement objective to achieve with respect to the output it produces. Each technique is designed to achieve some target e.g. reduce data size, minimize transmission energy, enhance accuracy etc. This paper presents a comprehensive survey of aggregation techniques that can be used in distributed manner to improve lifetime and energy conservation of wireless sensor networks. Main contribution of this work is proposal of a novel classification of such techniques based on the type of improvement they offer when applied to WSNs. Due to the existence of a myriad of definitions of aggregation, we first review the meaning of term aggregation that can be applied to WSN. The concept is then associated with the proposed classes. Each class of techniques is divided into a number of subclasses and a brief literature review of related work in WSN for each of these is also presented

Should I send now or send later? A decision-theoretic approach to transmission scheduling in sensor networks with mobile sinks

Mobile sinks can significantly extend the lifetime of a sensor network by eliminating the need for expensive hop-by-hop routing. However, a sensor node might not always have a mobile sink in transmission range, or the mobile sink might be so far that the data transmission would be very expensive. In the latter case, the sensor node needs to make a decision whether it should send the data now, or take the risk to wait for a more favorable occasion. Making the right decisions in this transmission scheduling problem has significant impact on the performance and lifetime of the node. In this paper, we investigate the fundamentals of the transmission scheduling problem for sensor networks with mobile sinks. We first develop a dynamic programming-based optimal algorithm for the case when the mobility of the sinks is known in advance. Then, we describe two decision theoretic algorithms which use only probabilistic models learned from the history of interaction with the mobile sinks, and do not require knowledge about their future mobility patterns. The first algorithm uses Markov Decision Processes with states without history information, while the second algorithm encodes some elements of the history into the state. Through a series of experiments, we show that the decision theoretic approaches significantly outperform naive heuristics, and can have a performance close to that of the optimal approach, without requiring an advance knowledge of the mobility

An Overview of Own Tracking Wireless Sensors with GSM-GPS Features

Wireless Sensors (WS) mobility and pause time have a major impact directly influencing the energy consumption. Lifetime of a WS Network (WSN) depends directly on the energy consumption, thus, the hardware and software components must be optimized for energy management. This study aims to combine a compact hardware architecture with a smart energy management efficiency in order to increase ratio Lifetime/Energy Consumption, to improve the operating time on a portable tracking system with GPS/GSM/GPRS features and own power. In this paper we present the evolution of own WS tracking architecture with GPS/GSM/GPRS features, basic criterion being the lifetime combined with low power consumption. Concern was focused on hardware and software areas: Large number of physical components led to reconsideration of hardware architecture, while for software, we focused on algorithms able to reduce the number of bits in transmitted data packets, which help to reduce energy consumption. The results and conclusions show that the goal was achieved