A comprehensive survey on radio resource management in 5G HetNets: current solutions, future trends and open issues

The 5G network technologies are intended to accommodate innovative services with a large influx of data traffic with lower energy consumption and increased quality of service and user quality of experience levels. In order to meet 5G expectations, heterogeneous networks (HetNets) have been introduced. They involve deployment of additional low power nodes within the coverage area of conventional high power nodes and their placement closer to user underlay HetNets. Due to the increased density of small-cell networks and radio access technologies, radio resource management (RRM) for potential 5G HetNets has emerged as a critical avenue. It plays a pivotal role in enhancing spectrum utilization, load balancing, and network energy efficiency. In this paper, we summarize the key challenges i.e., cross-tier interference, co-tier interference, and user association-resource-power allocation (UA-RA-PA) emerging in 5G HetNets and highlight their significance. In addition, we present a comprehensive survey of RRM schemes based on interference management (IM), UA-RA-PA and combined approaches (UA-RA-PA + IM). We introduce a taxonomy for individual (IM, UA-RA-PA) and combined approaches as a framework for systematically studying the existing schemes. These schemes are also qualitatively analyzed and compared to each other. Finally, challenges and opportunities for RRM in 5G are outlined, and design guidelines along with possible solutions for advanced mechanisms are presented

Efficient offloading and load distribution based on D2D relaying and UAVs for emergent wireless networks

The device to device (D2D) and unmanned aerial vehicle (UAV) communications are considered as enabling technologies of the emergent 5th generation of wireless and cellular system (5G). Consequently, it is important to determine their corresponding performance with respect to the 5G requirements. In particular, we focus on enhancing the offloading and load balancing performance in three directions. In the first direction, we study the achievable data rate of user relay assisting other users in two-tier networks. We propose a novel heuristic communication scheme called device-for-device (D4D). The D4D enables moving users to share their resource by taking advantage of cooperative communication. We study the moving user rate sensitivity to the relay selection and blocking probability. In the second direction, we study the offloading from macrocell to small cell and load balancing among small cell. Also, we design a new utility weight function that enables a balanced relay assignment. We propose a novel low complexity algorithm for centralized scheme maximizing the load among small cells as well as users subject to SINR threshold constraints. The simulations show that our proposed schemes achieve performance in load balancing compared to those obtained with the previous or traditional method. In the third direction, we study the 3D deployment of multiple UAVs for emergent on-demand offloading. We propose a novel on-demand deployment scheme based on maximizing both the operator’s profit and the quality of service. The proposed scheme is based on solving a non-convex problem by combining k-means clustering with pattern search to find the suboptimal location of UAVs. The simulation results show that our proposed scheme maximizes the operator’s profit and improves offloading traffic efficiency. Our global contribution was the development of a scheme to improve the quality of service and the performance in emergent networks through the improvement of the load distribution and resource sharing using D2D and UAV

Neural network design for intelligent mobile network optimisation

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonThe mobile networks users’ demands for data services are increasing exponentially, this is due to two main factors: the first is the evolution of smart phones and their application, and the second is the emerging new technologies for internet of things, smart cities…etc, which keeps pumping more data into the network; ‘though most of the data routed in the current mobile network is non-live data’. This increasing of demands arise the necessity for the mobile network operators to keep improving their network to satisfy it, this improvement takes place via adding hardware or increasing the resources or a combination of both. The radio resources are strictly limited due to spectrum licensing and availability, therefore efficient spectrum utilization is a major goal to be achieved for both network operators and developers. Simultaneous and multiple channel access,and adding more cells to the network are ways used to increase the data exchanged between the network nodes. The current 4G mobile system is based on the Orthogonal Frequency Division Multiple Access (OFDMA) for accessing the medium and the intercell interference degrades the link quality at the cell edge, with the introduction of heterogeneity concept to the LTE in Release 10 of the 3GPP the handover process became even more complex. To mitigate the intercell interference at the cell edge, coordinated multipoint and carrier aggregation techniques are utilized for dual connectivity. This work is focused on designing and proposing enhancing features to improve network performance and sustainability, these features comprises of distributing small cells for data only transmission, handover schemes performance evaluation at cell edge with dual connectivity, and Artificial Intelligence technology for balancing and prediction. In the proposed model design the data and controls of the Small eNodeB (SeNodeB) are processed at the network edge using a Mobile Edge Computing (MEC) server and the SeNodeBs are used to boost services provided to the users, also the concept of caching data has been investigated, the caching units where implemented in different network levels. The proposed system and resource management are simulated using the OPNET modeller and evaluated through multiple scenarios with and without full load, the UE is reconfigured to accommodate dual connectivity and have two separate connections for uplink and downlink, while maintaining connection to the Macro cell via uplink, the downlink is dedicated for small cells when content is requested from the cache. The results clearly show that the proposed system can decrease the latency while the total throughput delivered by the network has highly improved when SeNodeBs are deployed in the system, rising throughput will incur the rise of overall capacity which leads to better services being provided to the users or more users to join and benefit from the network. Handover improvement is also considered in this work, with the help of two Artificial Intelligence (AI) entities better handover performance are achieved. Balanced load over the SeNodeBs results in less frequent handover, the proposed load balancer is based on artificial neural network clustering model with self-organizing map as a hidden layer, it’s trained to forecast the network condition and learn to reduce the number of handovers especially for the UEs at the cell edge by performing only necessary ones, and avoid handovers to the Macro cell for the downlink direction. The examined handovers concern the downlinks when routing non live video stored at the small cell’s cache, and a reduction in the frequent handovers was achieved when running the balancer. Keep revolving in the handover orbit, another way to preserve and utilize network resources is by predicting the handovers before they occur, and allocate the required data in the target SeNodeB, the predictor entity in the proposed system architecture combines the features of Radial Basis Function Neural Network and neural network time series tool to create and update prediction list from the system’s collected data and learn to predict the next SeNodeB to associate with. The prediction entity is simulated using MATLAB, and the results shows that the system was able to deliver up to 92% correct predictions for handovers which led to overall throughput improvement of 75%

An optimal multitier resource allocation of cloud RAN in 5G using machine learning

The networks are evolving drastically since last few years in order to meetuser requirements. For example, the 5G is offering most of the available spec-trum under one umbrella. In this work, we will address the resource allocationproblem in fifth-generation (5G) networks, to be exact in the Cloud Radio AccessNetworks (C-RANs). The radio access network mechanisms involve multiplenetwork topologies that are isolated based on the spectrum bands and it shouldbe enhanced with numerous access technology in the deployment of 5G net-work. The C-RAN is one of the optimal technique to combine all the availablespectral bands. However, existing C-RAN mechanisms lacks the intelligence per-spective on choosing the spectral bands. Thus, C-RAN mechanism requires anadvanced tool to identify network topology to allocate the network resources forsubstantial traffic volumes. Therefore, there is a need to propose a frameworkthat handles spectral resources based on user requirements and network behav-ior. In this work, we introduced a new C-RAN architecture modified as multitierHeterogeneous Cloud Radio Access Networks in a 5G environment. This archi-tecture handles spectral resources efficiently. Based on the simulation analysis,the proposed multitier H-CRAN architecture with improved control unit innetwork management perspective enables augmented granularity, end-to-endoptimization, and guaranteed quality of service by 15 percentages over theexisting system

AN EFFICIENT INTERFERENCE AVOIDANCE SCHEME FOR DEVICE-TODEVICE ENABLED FIFTH GENERATION NARROWBAND INTERNET OF THINGS NETWOKS’

Narrowband Internet of Things (NB-IoT) is a low-power wide-area (LPWA) technology built on long-term evolution (LTE) functionalities and standardized by the 3rd-Generation Partnership Project (3GPP). Due to its support for massive machine-type communication (mMTC) and different IoT use cases with rigorous standards in terms of connection, energy efficiency, reachability, reliability, and latency, NB-IoT has attracted the research community. However, as the capacity needs for various IoT use cases expand, the LTE evolved packet core (EPC) system's numerous functionalities may become overburdened and suboptimal. Several research efforts are currently in progress to address these challenges. As a result, an overview of these efforts with a specific focus on the optimized architecture of the LTE EPC functionalities, the 5G architectural design for NB-IoT integration, the enabling technologies necessary for 5G NB-IoT, 5G new radio (NR) coexistence with NB-IoT, and feasible architectural deployment schemes of NB-IoT with cellular networks is discussed. This thesis also presents cloud-assisted relay with backscatter communication as part of a detailed study of the technical performance attributes and channel communication characteristics from the physical (PHY) and medium access control (MAC) layers of the NB-IoT, with a focus on 5G. The numerous drawbacks that come with simulating these systems are explored. The enabling market for NB-IoT, the benefits for a few use cases, and the potential critical challenges associated with their deployment are all highlighted. Fortunately, the cyclic prefix orthogonal frequency division multiplexing (CPOFDM) based waveform by 3GPP NR for improved mobile broadband (eMBB) services does not prohibit the use of other waveforms in other services, such as the NB-IoT service for mMTC. As a result, the coexistence of 5G NR and NB-IoT must be manageably orthogonal (or quasi-orthogonal) to minimize mutual interference that limits the form of freedom in the waveform's overall design. As a result, 5G coexistence with NB-IoT will introduce a new interference challenge, distinct from that of the legacy network, even though the NR's coexistence with NB-IoT is believed to improve network capacity and expand the coverage of the user data rate, as well as improves robust communication through frequency reuse. Interference challenges may make channel estimation difficult for NB-IoT devices, limiting the user performance and spectral efficiency. Various existing interference mitigation solutions either add to the network's overhead, computational complexity and delay or are hampered by low data rate and coverage. These algorithms are unsuitable for an NB-IoT network owing to the low-complexity nature. As a result, a D2D communication based interference-control technique becomes an effective strategy for addressing this problem. This thesis used D2D communication to decrease the network bottleneck in dense 5G NBIoT networks prone to interference. For D2D-enabled 5G NB-IoT systems, the thesis presents an interference-avoidance resource allocation that considers the less favourable cell edge NUEs. To simplify the algorithm's computing complexity and reduce interference power, the system divides the optimization problem into three sub-problems. First, in an orthogonal deployment technique using channel state information (CSI), the channel gain factor is leveraged by selecting a probable reuse channel with higher QoS control. Second, a bisection search approach is used to find the best power control that maximizes the network sum rate, and third, the Hungarian algorithm is used to build a maximum bipartite matching strategy to choose the optimal pairing pattern between the sets of NUEs and the D2D pairs. The proposed approach improves the D2D sum rate and overall network SINR of the 5G NB-IoT system, according to the numerical data. The maximum power constraint of the D2D pair, D2D's location, Pico-base station (PBS) cell radius, number of potential reuse channels, and cluster distance impact the D2D pair's performance. The simulation results achieve 28.35%, 31.33%, and 39% SINR performance higher than the ARSAD, DCORA, and RRA algorithms when the number of NUEs is twice the number of D2D pairs, and 2.52%, 14.80%, and 39.89% SINR performance higher than the ARSAD, RRA, and DCORA when the number of NUEs and D2D pairs are equal. As a result, a D2D sum rate increase of 9.23%, 11.26%, and 13.92% higher than the ARSAD, DCORA, and RRA when the NUE’s number is twice the number of D2D pairs, and a D2D’s sum rate increase of 1.18%, 4.64% and 15.93% higher than the ARSAD, RRA and DCORA respectively, with an equal number of NUEs and D2D pairs is achieved. The results demonstrate the efficacy of the proposed scheme. The thesis also addressed the problem where the cell-edge NUE's QoS is critical to challenges such as long-distance transmission, delays, low bandwidth utilization, and high system overhead that affect 5G NB-IoT network performance. In this case, most cell-edge NUEs boost their transmit power to maximize network throughput. Integrating cooperating D2D relaying technique into 5G NB-IoT heterogeneous network (HetNet) uplink spectrum sharing increases the system's spectral efficiency and interference power, further degrading the network. Using a max-max SINR (Max-SINR) approach, this thesis proposed an interference-aware D2D relaying strategy for 5G NB-IoT QoS improvement for a cell-edge NUE to achieve optimum system performance. The Lagrangian-dual technique is used to optimize the transmit power of the cell-edge NUE to the relay based on the average interference power constraint, while the relay to the NB-IoT base station (NBS) employs a fixed transmit power. To choose an optimal D2D relay node, the channel-to-interference plus noise ratio (CINR) of all available D2D relays is used to maximize the minimum cell-edge NUE's data rate while ensuring the cellular NUEs' QoS requirements are satisfied. Best harmonic mean, best-worst, half-duplex relay selection, and a D2D communication scheme were among the other relaying selection strategies studied. The simulation results reveal that the Max-SINR selection scheme outperforms all other selection schemes due to the high channel gain between the two communication devices except for the D2D communication scheme. The proposed algorithm achieves 21.27% SINR performance, which is nearly identical to the half-duplex scheme, but outperforms the best-worst and harmonic selection techniques by 81.27% and 40.29%, respectively. As a result, as the number of D2D relays increases, the capacity increases by 14.10% and 47.19%, respectively, over harmonic and half-duplex techniques. Finally, the thesis presents future research works on interference control in addition with the open research directions on PHY and MAC properties and a SWOT (Strengths, Weaknesses, Opportunities, and Threats) analysis presented in Chapter 2 to encourage further study on 5G NB-IoT