Development of a Novel MultiBody Mechatronic Model for Five-Axis CNC Machine Tool

The paper presents the development of a mechatronic hybrid model for Geiss five-axis CNC machine tool using MultiBody-System (MBS) approach. The motion control systems comprising electrical and mechanical elements are analyzed and modeled. The 3D assembly of the machine tool is built in SolidWorks and exported into SimMechanics which interfaces seamlessly with SimPowerSystems, SimDriveline, and Simulink packages. CNC machine tools are mechatronic systems incorporating non-linearities so the proposed multibody mechatronic model (which considers the coupling of elastic mechanical structures with the control systems) represents accurately the dynamic behaviour of the actual machine by using only one simulation environment

Analog VLSI-Based Modeling of the Primate Oculomotor System

One way to understand a neurobiological system is by building a simulacrum that replicates its behavior in real time using similar constraints. Analog very large-scale integrated (VLSI) electronic circuit technology provides such an enabling technology. We here describe a neuromorphic system that is part of a long-term effort to understand the primate oculomotor system. It requires both fast sensory processing and fast motor control to interact with the world. A one-dimensional hardware model of the primate eye has been built that simulates the physical dynamics of the biological system. It is driven by two different analog VLSI chips, one mimicking cortical visual processing for target selection and tracking and another modeling brain stem circuits that drive the eye muscles. Our oculomotor plant demonstrates both smooth pursuit movements, driven by a retinal velocity error signal, and saccadic eye movements, controlled by retinal position error, and can reproduce several behavioral, stimulation, lesion, and adaptation experiments performed on primates

Bio-inspired swing leg control for spring-mass robots running on ground with unexpected height disturbance

We proposed three swing leg control policies for spring-mass running robots, inspired by experimental data from our recent collaborative work on ground running birds. Previous investigations suggest that animals may prioritize injury avoidance and/or efficiency as their objective function during running rather than maintaining limit-cycle stability. Therefore, in this study we targeted structural capacity (maximum leg force to avoid damage) and efficiency as the main goals for our control policies, since these objective functions are crucial to reduce motor size and structure weight. Each proposed policy controls the leg angle as a function of time during flight phase such that its objective function during the subsequent stance phase is regulated. The three objective functions that are regulated in the control policies are (i) the leg peak force, (ii) the axial impulse, and (iii) the leg actuator work. It should be noted that each control policy regulates one single objective function. Surprisingly, all three swing leg control policies result in nearly identical subsequent stance phase dynamics. This implies that the implementation of any of the proposed control policies would satisfy both goals (damage avoidance and efficiency) at once. Furthermore, all three control policies require a surprisingly simple leg angle adjustment: leg retraction with constant angular acceleration

Experiments on the dynamic behavior of cavitating pumps

This paper describes experiments performed to measure the dynamic transfer matrices for cavitating (and noncavitating) pumps. These transfer matrices describe the relationship between small linear oscillatory perturbations in the pressures and mass flow rates at inlet and discharge from the hydraulic machine. The matrices were deduced from direct measurements of these fluctuating quantities for different modes of excitation of the machine. Results for a cavitating inducer are presented as functions of frequency and mean operating state. Though some of the trends in the data are consistent with existing theoretical models of inducer dynamics, others are not, indicating a need for further theoretical investigation of the dynamic characteristics of such flows. The results exhibit increasingly complex dynamics with increasing cavitation; it appears that the hydraulic machine deviates from an essentially passive response without cavitation to an increasingly active response as the cavitation number is reduced

Fluid-induced Rotordynamic Forces and Instabilities

In the late 1970s, the authors began a collaboration with our colleague Tom Caughey that helped define a new set of fluid-structure interaction phenomena in turbomachines, namely fluid-induced rotordynamic forces and instabilities. That collaboration and the 31 joint ABC papers it produced epitomized Tom Caughey's genius and we reprise it here in his honor. The design of the space shuttle main engine (SSME) pushed beyond the boundaries of many known technologies. In particular, the rotating speeds and operating conditions of the high speed liquid oxygen and liquid hydrogen turbopumps were extreme and early testing revealed a whirl instability whose magnitude exceeded expectations and allowable limits. It was suspected and later proven that fluid-induced rotordynamic effects were a contributing factor and yet very little was known of such phenomena. As one of the efforts seeking understanding, we constructed a facility to measure fluid-induced rotordynamic forces. This was subsequently used in a broad range of investigations. Initially, the effort was directed to understanding the source and parametric variations of destabilizing fluid forces. Later various components of the flow in a high speed turbopump were investigated. And finally, some ameliorative measures and their effectiveness were examined. This paper reviews this body of knowledge and the lessons learnt along the way

Thrust control design for unmanned marine vehicles

Thesis (Master)--Izmir Institute of Technology, Mechanical Engineering, Izmir, 2012Includes bibliographical references (leaves: 65-70)Text in English; Abstract: Turkish and Englishxv, 74 leavesIn conventional electrically driven propulsion systems with fixed pitch propellers, thruster controllers are usually aimed at controlling propeller shaft speed only. Especially in unmanned marine vehicles which operate in dynamic flow conditions, these type thruster controllers provide unsatisfactory thrust responses. The reason for this is that the thrust force is simultaneously affected by dynamic effects like, variable ambient flow velocity and angle, thruster-thruster interaction and ventilation. It is aimed to achieve acceptable thrust tracking accuracy in all kind of dynamic flow conditions in this thesis work. A novel feed-back based thruster controller which includes the effect of incoming axial flow velocity, is designed for this purpose. In controller design, first, thruster propeller's open water characteristics in four-quadrant flow states are measured. Data collected from open water tests are then non-dimensionalized and embedded in the controller's thrust model code. Relation between ideal shaft speed and desired thrust is derived by using the four-quadrant propeller model. The proposed method is evaluated in the experimental test-setup designed for this study to simulate open water conditions. Results indicate that thrust tracking performance of novel controller is acceptable in all four-quadrant flow tests

In silico case studies of compliant robots: AMARSI deliverable 3.3

In the deliverable 3.2 we presented how the morphological computing ap- proach can significantly facilitate the control strategy in several scenarios, e.g. quadruped locomotion, bipedal locomotion and reaching. In particular, the Kitty experimental platform is an example of the use of morphological computation to allow quadruped locomotion. In this deliverable we continue with the simulation studies on the application of the different morphological computation strategies to control a robotic system