6,640 research outputs found
Comprehensive design and propagation study of a compact dual band antenna for healthcare applications
In this paper, a dual band planar inverted F antenna (PIFA) has been investigated for cooperative on- and off-body communications. Free space and on-body performance parameters like return loss, bandwidth, radiation pattern and efficiency of this antenna are shown and investigated. The on- and off-body radio propagation channel performance at 2.45 GHz and 1.9 GHz have been investigated, respectively. Experimental investigations are performed both in the anechoic chamber and in an indoor environment. The path loss exponent has been extracted for both on- and off-body radio propagation scenarios. For on-body propagation, the path loss exponent is 2.48 and 2.22 in the anechoic chamber and indoor environment, respectively. The path loss exponent is 1.27 for off-body radio propagation situation. For on-body case, the path loss has been characterized for ten different locations on the body at 2.45 GHz, whereas for off-body case radio channel studies are performed for five different locations at 1.9 GHz. The proposed antenna shows a good on- and off-body radio channel performance
On the Frequency Dependency of Radio Channel's Delay Spread: Analyses and Findings From mmMAGIC Multi-frequency Channel Sounding
This paper analyzes the frequency dependency of the radio propagation
channel's root mean square (rms) delay spread (DS), based on the
multi-frequency measurement campaigns in the mmMAGIC project. The campaigns
cover indoor, outdoor, and outdoor-to-indoor (O2I) scenarios and a wide
frequency range from 2 to 86 GHz. Several requirements have been identified
that define the parameters which need to be aligned in order to make a
reasonable comparison among the different channel sounders employed for this
study. A new modelling approach enabling the evaluation of the statistical
significance of the model parameters from different measurements and the
establishment of a unified model is proposed. After careful analysis, the
conclusion is that any frequency trend of the DS is small considering its
confidence intervals. There is statistically significant difference from the
3GPP New Radio (NR) model TR 38.901, except for the O2I scenario.Comment: This paper has been accepted to the 2018 12th European Conference on
Antennas and Propagation (EuCAP), London, UK, April 201
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
A Novel Millimeter-Wave Channel Simulator and Applications for 5G Wireless Communications
This paper presents details and applications of a novel channel simulation
software named NYUSIM, which can be used to generate realistic temporal and
spatial channel responses to support realistic physical- and link-layer
simulations and design for fifth-generation (5G) cellular communications.
NYUSIM is built upon the statistical spatial channel model for broadband
millimeter-wave (mmWave) wireless communication systems developed by
researchers at New York University (NYU). The simulator is applicable for a
wide range of carrier frequencies (500 MHz to 100 GHz), radio frequency (RF)
bandwidths (0 to 800 MHz), antenna beamwidths (7 to 360 degrees for azimuth and
7 to 45 degrees for elevation), and operating scenarios (urban microcell, urban
macrocell, and rural macrocell), and also incorporates multiple-input
multiple-output (MIMO) antenna arrays at the transmitter and receiver. This
paper also provides examples to demonstrate how to use NYUSIM for analyzing
MIMO channel conditions and spectral efficiencies, which show that NYUSIM is an
alternative and more realistic channel model compared to the 3rd Generation
Partnership Project (3GPP) and other channel models for mmWave bands.Comment: 7 pages, 8 figures, in 2017 IEEE International Conference on
Communications (ICC), Paris, May 201
5G 3GPP-like Channel Models for Outdoor Urban Microcellular and Macrocellular Environments
For the development of new 5G systems to operate in bands up to 100 GHz,
there is a need for accurate radio propagation models at these bands that
currently are not addressed by existing channel models developed for bands
below 6 GHz. This document presents a preliminary overview of 5G channel models
for bands up to 100 GHz. These have been derived based on extensive measurement
and ray tracing results across a multitude of frequencies from 6 GHz to 100
GHz, and this document describes an initial 3D channel model which includes: 1)
typical deployment scenarios for urban microcells (UMi) and urban macrocells
(UMa), and 2) a baseline model for incorporating path loss, shadow fading, line
of sight probability, penetration and blockage models for the typical
scenarios. Various processing methodologies such as clustering and antenna
decoupling algorithms are also presented.Comment: To be published in 2016 IEEE 83rd Vehicular Technology Conference
Spring (VTC 2016-Spring), Nanjing, China, May 201
Investigation of Prediction Accuracy, Sensitivity, and Parameter Stability of Large-Scale Propagation Path Loss Models for 5G Wireless Communications
This paper compares three candidate large-scale propagation path loss models
for use over the entire microwave and millimeter-wave (mmWave) radio spectrum:
the alpha-beta-gamma (ABG) model, the close-in (CI) free space reference
distance model, and the CI model with a frequency-weighted path loss exponent
(CIF). Each of these models have been recently studied for use in standards
bodies such as 3GPP, and for use in the design of fifth generation (5G)
wireless systems in urban macrocell, urban microcell, and indoor office and
shopping mall scenarios. Here we compare the accuracy and sensitivity of these
models using measured data from 30 propagation measurement datasets from 2 GHz
to 73 GHz over distances ranging from 4 m to 1238 m. A series of sensitivity
analyses of the three models show that the physically-based two-parameter CI
model and three-parameter CIF model offer computational simplicity, have very
similar goodness of fit (i.e., the shadow fading standard deviation), exhibit
more stable model parameter behavior across frequencies and distances, and
yield smaller prediction error in sensitivity testing across distances and
frequencies, when compared to the four-parameter ABG model. Results show the CI
model with a 1 m close-in reference distance is suitable for outdoor
environments, while the CIF model is more appropriate for indoor modeling. The
CI and CIF models are easily implemented in existing 3GPP models by making a
very subtle modification -- by replacing a floating non-physically based
constant with a frequency-dependent constant that represents free space path
loss in the first meter of propagation.Comment: Open access available at:
http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=743465
- …