Intelligent model-based control of complex multi-link mechanisms

Complex under-actuated multilink mechanism involves a system whose number of control inputs is smaller than the dimension of the configuration space. The ability to control such a system through the manipulation of its natural dynamics would allow for the design of more energy-efficient machines with the ability to achieve smooth motions similar to those found in the natural world. This research aims to understand the complex nature of the Robogymnast, a triple link underactuated pendulum built at Cardiff University with the purpose of studying the behaviour of non-linear systems and understanding the challenges in developing its control system. A mathematical model of the robot was derived from the Euler-Lagrange equations. The design of the control system was based on the discrete-time linear model around the downward position and a sampling time of 2.5 milliseconds. Firstly, Invasive Weed Optimization (IWO) was used to optimize the swing-up motion of the robot by determining the optimum values of parameters that control the input signals of the Robogymnast’s two motors. The values obtained from IWO were then applied to both simulation and experiment. The results showed that the swing-up motion of the Robogymnast from the stable downward position to the inverted configuration to be successfully achieved. Secondly, due to the complex nature and nonlinearity of the Robogymnast, a novel approach of modelling the Robogymnast using a multi-layered Elman neural ii network (ENN) was proposed. The ENN model was then tested with various inputs and its output were analysed. The results showed that the ENN model to be capable of providing a better representation of the actual system compared to the mathematical model. Thirdly, IWO is used to investigate the optimum Q values of the Linear Quadratic Regulator (LQR) for inverted balance control of the Robogymnast. IWO was used to obtain the optimal Q values required by the LQR to maintain the Robogymnast in an upright configuration. Two fitness criteria were investigated: cost function J and settling time T. A controller was developed using values obtained from each fitness criteria. The results showed that LQRT performed faster but LQRJ was capable of stabilizing the Robogymnast from larger deflection angles. Finally, fitness criteria J and T were used simultaneously to obtain the optimal Q values for the LQR. For this purpose, two multi-objective optimization methods based on the IWO, namely the Weighted Criteria Method IWO (WCMIWO) and the Fuzzy Logic IWO Hybrid (FLIWOH) were developed. Two LQR controllers were first developed using the parameters obtained from the two optimization methods. The same process was then repeated with disturbance applied to the Robogymnast states to develop another two LQR controllers. The response of the controllers was then tested in different scenarios using simulation and their performance was evaluated. The results showed that all four controllers were able to balance the Robogymnast with the fastest settling time achieved by WMCIWO with disturbance followed by in the ascending order: FLIWOH with disturbance, FLIWOH, and WCMIWO

An investigation of various controller designs for multi-link robotic system (Robogymnast)

An approach to controlling the three-link Robogymnast robotic gymnast and assessing stability is proposed and examined. In the study, a conventionally configured linear quadratic regulator is applied and compared with a fuzzy logic linear quadratic regulator hybrid approach for stabilising the Robogymnast. The Robogymnast is designed to replicate the movement of a human as they hang with both hands holding the high bar and then work to wing up into a handstand, still gripping the bar. The system, therefore has a securely attached link between the hand element and the ‘high bar’, which is mounted on ball bearings and can rotate freely. Moreover, in the study, a mathematical model for the system is linearised, investigating the means of determining the state space in the system by applying Lagrange’s equation. The fuzzy logic linear quadratic regulator controller is used to identify how far the system responses stabilise when it is implemented. This paper investigates factors affecting the control of swing-up in the underactuated three-link Robogymnast. Moreover, a system simulation using MATLAB Simulink is conducted to show the impact of factors including overshoot, rising, and settling time. The principal objective of the study lies in investigating how a linear quadratic regulator or fuzzy logic controller with a linear quadratic regulator (FLQR) can be applied to the Robogymnast, and to assess system behaviour under five scenarios, namely the original value, this value plus or minus ±25%, and plus or minus ±50%. In order to further assess the performance of the controllers used, a comparison is made between the outcomes found here and findings in the recent literature with fuzzy linear quadratic regulator controllers

Analysing various control technics for manipulator robotic system (Robogymnast)

The Robogymnast is a highly complex, three-link system based on the triple-inverted pendulum and is modelled on the human example of a gymnast suspended by their hands from the high bar and executing larger and larger upswings to eventually rotate fully. The links of the Robogymnast correspond respectively to the arms, trunk, and lower limbs of the gymnast, and from its three joints, one is under passive operation, while the remaining two are powered. The passive top joint poses severe challenges in attaining the smooth movement control needed to operate the Robogymnast effectively. This study assesses four types of controllers used for systems operation and identifies how far response stabilisation is achieved with each. The system is simulated using MATLAB Simulink, with findings generated regarding rising and settling time, as well as overshoot. The research primarily seeks to examine the application of a linear quadratic regulator controller, proportionalintegral-derivative controller, fuzzy linear quadratic regulator controller and linear quadratic regulator- proportional-integral-derivative controller for this type of system and comparisons between the different controllers to demonstrate successful performance, which highlights the claimed advantages of the proposed system

Improvements on the bees algorithm for continuous optimisation problems

This work focuses on the improvements of the Bees Algorithm in order to enhance the algorithm’s performance especially in terms of convergence rate. For the first enhancement, a pseudo-gradient Bees Algorithm (PG-BA) compares the fitness as well as the position of previous and current bees so that the best bees in each patch are appropriately guided towards a better search direction after each consecutive cycle. This method eliminates the need to differentiate the objective function which is unlike the typical gradient search method. The improved algorithm is subjected to several numerical benchmark test functions as well as the training of neural network. The results from the experiments are then compared to the standard variant of the Bees Algorithm and other swarm intelligence procedures. The data analysis generally confirmed that the PG-BA is effective at speeding up the convergence time to optimum. Next, an approach to avoid the formation of overlapping patches is proposed. The Patch Overlap Avoidance Bees Algorithm (POA-BA) is designed to avoid redundancy in search area especially if the site is deemed unprofitable. This method is quite similar to Tabu Search (TS) with the POA-BA forbids the exact exploitation of previously visited solutions along with their corresponding neighbourhood. Patches are not allowed to intersect not just in the next generation but also in the current cycle. This reduces the number of patches materialise in the same peak (maximisation) or valley (minimisation) which ensures a thorough search of the problem landscape as bees are distributed around the scaled down area. The same benchmark problems as PG-BA were applied against this modified strategy to a reasonable success. Finally, the Bees Algorithm is revised to have the capability of locating all of the global optimum as well as the substantial local peaks in a single run. These multi-solutions of comparable fitness offers some alternatives for the decision makers to choose from. The patches are formed only if the bees are the fittest from different peaks by using a hill-valley mechanism in this so called Extended Bees Algorithm (EBA). This permits the maintenance of diversified solutions throughout the search process in addition to minimising the chances of getting trap. This version is proven beneficial when tested with numerous multimodal optimisation problems

Enhancement of bees algorithm for global optimisation

This research focuses on the improvement of the Bees Algorithm, a swarm-based nature-inspired optimisation algorithm that mimics the foraging behaviour of honeybees. The algorithm consists of exploitation and exploration, the two key elements of optimisation techniques that help to find the global optimum in optimisation problems. This thesis presents three new approaches to the Bees Algorithm in a pursuit to improve its convergence speed and accuracy. The first proposed algorithm focuses on intensifying the local search area by incorporating Hooke and Jeeves’ method in its exploitation mechanism. This direct search method contains a pattern move that works well in the new variant named “Bees Algorithm with Hooke and Jeeves” (BA-HJ). The second proposed algorithm replaces the randomly generated recruited bees deployment method with chaotic sequences using a well-known logistic map. This new variant called “Bees Algorithm with Chaos” (ChaosBA) was intended to use the characteristic of chaotic sequences to escape from local optima and at the same time maintain the diversity of the population. The third improvement uses the information of the current best solutions to create new candidate solutions probabilistically using the Estimation Distribution Algorithm (EDA) approach. This new version is called Bees Algorithm with Estimation Distribution (BAED). Simulation results show that these proposed algorithms perform better than the standard BA, SPSO2011 and qABC in terms of convergence for the majority of the tested benchmark functions. The BA-HJ outperformed the standard BA in thirteen out of fifteen benchmark functions and is more effective in eleven out of fifteen benchmark functions when compared to SPSO2011 and qABC. In the case of the ChaosBA, the algorithm outperformed the standard BA in twelve out of fifteen benchmark functions and significantly better in eleven out of fifteen test functions compared to qABC and SPSO2011. BAED discovered the optimal solution with the least number of evaluations in fourteen out of fifteen cases compared to the standard BA, and eleven out of fifteen functions compared to SPSO2011 and qABC. Furthermore, the results on a set of constrained mechanical design problems also show that the performance of the proposed algorithms is comparable to those of the standard BA and other swarm-based algorithms from the literature

Play Among Books

How does coding change the way we think about architecture? Miro Roman and his AI Alice_ch3n81 develop a playful scenario in which they propose coding as the new literacy of information. They convey knowledge in the form of a project model that links the fields of architecture and information through two interwoven narrative strands in an “infinite flow” of real books

Play Among Books

How does coding change the way we think about architecture? Miro Roman and his AI Alice_ch3n81 develop a playful scenario in which they propose coding as the new literacy of information. They convey knowledge in the form of a project model that links the fields of architecture and information through two interwoven narrative strands in an “infinite flow” of real books