Full-Duplex Systems Using Multi-Reconfigurable Antennas

Full-duplex systems are expected to achieve 100% rate improvement over half-duplex systems if the self-interference signal can be significantly mitigated. In this paper, we propose the first full-duplex system utilizing Multi-Reconfigurable Antenna (MRA) with ?90% rate improvement compared to half-duplex systems. MRA is a dynamically reconfigurable antenna structure, that is capable of changing its properties according to certain input configurations. A comprehensive experimental analysis is conducted to characterize the system performance in typical indoor environments. The experiments are performed using a fabricated MRA that has 4096 configurable radiation patterns. The achieved MRA-based passive self-interference suppression is investigated, with detailed analysis for the MRA training overhead. In addition, a heuristic-based approach is proposed to reduce the MRA training overhead. The results show that at 1% training overhead, a total of 95dB self-interference cancellation is achieved in typical indoor environments. The 95dB self-interference cancellation is experimentally shown to be sufficient for 90% full-duplex rate improvement compared to half-duplex systems.Comment: Submitted to IEEE Transactions on Wireless Communication

Receiver Front-Ends in CMOS with Ultra-Low Power Consumption

Historically, research on radio communication has focused on improving range and data rate. In the last decade, however, there has been an increasing demand for low power and low cost radios that can provide connectivity with small devices around us. They should be able to offer basic connectivity with a power consumption low enough to function extended periods of time on a single battery charge, or even energy scavenged from the surroundings. This work is focused on the design of ultra-low power receiver front-ends intended for a receiver operating in the 2.4GHz ISM band, having an active power consumption of 1mW and chip area of 1mm². Low power consumption and small size make it hard to achieve good sensitivity and tolerance to interference. This thesis starts with an introduction to the overall receiver specifications, low power radio and radio standards, front-end and LO generation architectures and building blocks, followed by the four included papers. Paper I demonstrates an inductorless front-end operating at 915MHz, including a frequency divider for quadrature LO generation. An LO generator operating at 2.4GHz is shown in Paper II, enabling a front-end operating above 2GHz. Papers III and IV contain circuits with combined front-end and LO generator operating at or above the full 2.45GHz target frequency. They use VCO and frequency divider topologies that offer efficient operation and low quadrature error. An efficient passive-mixer design with improved suppression of interference, enables an LNA-less design in Paper IV capable of operating without a SAW-filter

Indoor off-body wireless communication: static beamforming versus space-time coding

The performance of beamforming versus space-time coding using a body-worn textile antenna array is experimentally evaluated for an indoor environment, where a walking rescue worker transmits data in the 2.45 GHz ISM band, relying on a vertical textile four-antenna array integrated into his garment. The two transmission scenarios considered are static beamforming at low-elevation angles and space-time code based transmit diversity. Signals are received by a base station equipped with a horizontal array of four dipole antennas providing spatial receive diversity through maximum-ratio combining. Signal-to-noise ratios, bit error rate characteristics, and signal correlation properties are assessed for both off-body transmission scenarios. Without receiver diversity, the performance of space-time coding is generally better. In case of fourth-order receiver diversity, beamforming is superior in line-of-sight conditions. For non-line-of-sight propagation, the space-time codes perform better as soon as bit error rates are low enough for a reliable data link

Analysis of Background Noise for Wireless Microwave LAN Channels

Perusal of the details within, should provide the reader with an insight into general wireless indoor communications within the microwave spectrum, with respect to the problems laced, specific to noise corruption of the transmitted signal. Indoor communication systems are difficult to model, due to the largely random nature of the relevant environment, and the compounding factors that degrade system performance. These factors are many and varied, in accordance with the operational topologies of possible application area. However, there exists a common and increasing need to effectively model the communication links in question. Part of this strategy involves having an understanding of what levels of background noise exist within the operational area involved, and to what degree it is variable in accordance with application and link topologies. It is this requirement that provided the catalyst for my investigations. This study investigates the various noise sources evident on the two frequency bands allocated for wireless LAN applications, and considers the relative importance of the findings. As further perusal will reveal, the major disturbance likely to affect such technologies, are microwave ovens, both on a domestic and commercial scale. A lull statistical analysis is presented for the spectrum distribution and corresponding power levels for microwave ovens, with the results being utilised to present an examination of the possible influence that they may have upon the system, and the significance of such claims

Coherent coupling between radio frequency, optical, and acoustic waves in piezo-optomechanical circuits

The interaction of optical and mechanical modes in nanoscale optomechanical systems has been widely studied for applications ranging from sensing to quantum information science. Here, we develop a platform for cavity optomechanical circuits in which localized and interacting 1550 nm photons and 2.4 GHz phonons are combined with photonic and phononic waveguides. Working in GaAs facilitates manipulation of the localized mechanical mode either with a radio frequency field through the piezo-electric effect, or optically through the strong photoelastic effect. We use this to demonstrate a novel acoustic wave interference effect, analogous to coherent population trapping in atomic systems, in which the coherent mechanical motion induced by the electrical drive can be completely cancelled out by the optically-driven motion. The ability to manipulate cavity optomechanical systems with equal facility through either photonic or phononic channels enables new device and system architectures for signal transduction between the optical, electrical, and mechanical domains

Development Of Inductively-Degenerated LNA For W-CDMA Application Utilizing 0.18 Um RFCMOS Technology

Satu metodologi terperinci dan bersistematik untuk merekabentuk penguat hingar rendah (LNA) induktif ternyahjana kaskod, juga dikenali sebagai topologi Padanan Masukan dan Hingar Serentak (SNIM), A detailed and systematic methodology on the design of the inductivelydegenerated cascode LNA, also known as the Simultaneously Noise and Input Matching (SNIM) LNA