911 research outputs found

    Degrees of Freedom of Two-Hop Wireless Networks: "Everyone Gets the Entire Cake"

    Full text link
    We show that fully connected two-hop wireless networks with K sources, K relays and K destinations have K degrees of freedom both in the case of time-varying channel coefficients and in the case of constant channel coefficients (in which case the result holds for almost all values of constant channel coefficients). Our main contribution is a new achievability scheme which we call Aligned Network Diagonalization. This scheme allows the data streams transmitted by the sources to undergo a diagonal linear transformation from the sources to the destinations, thus being received free of interference by their intended destination. In addition, we extend our scheme to multi-hop networks with fully connected hops, and multi-hop networks with MIMO nodes, for which the degrees of freedom are also fully characterized.Comment: Presented at the 2012 Allerton Conference. Submitted to IEEE Transactions on Information Theor

    Principles of Physical Layer Security in Multiuser Wireless Networks: A Survey

    Full text link
    This paper provides a comprehensive review of the domain of physical layer security in multiuser wireless networks. The essential premise of physical-layer security is to enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers without relying on higher-layer encryption. This can be achieved primarily in two ways: without the need for a secret key by intelligently designing transmit coding strategies, or by exploiting the wireless communication medium to develop secret keys over public channels. The survey begins with an overview of the foundations dating back to the pioneering work of Shannon and Wyner on information-theoretic security. We then describe the evolution of secure transmission strategies from point-to-point channels to multiple-antenna systems, followed by generalizations to multiuser broadcast, multiple-access, interference, and relay networks. Secret-key generation and establishment protocols based on physical layer mechanisms are subsequently covered. Approaches for secrecy based on channel coding design are then examined, along with a description of inter-disciplinary approaches based on game theory and stochastic geometry. The associated problem of physical-layer message authentication is also introduced briefly. The survey concludes with observations on potential research directions in this area.Comment: 23 pages, 10 figures, 303 refs. arXiv admin note: text overlap with arXiv:1303.1609 by other authors. IEEE Communications Surveys and Tutorials, 201

    Wireless-Powered Communication Assisted by Two-Way Relay with Interference Alignment Underlaying Cognitive Radio Network

    Full text link
    This study investigates the outage performance of an under-laying wireless-powered secondary system that reuses the primary users (PU) spectrum in a multiple-input multiple-output (MIMO) cognitive radio (CR) network. Each secondary user (SU) harvests energy and receives information simultaneously by applying power splitting (PS) protocol. The communication between SUs is aided by a two-way (TW) decode and forward (DF) relay. We formulate a problem to design the PS ratios at SUs, the power control factor at the secondary relay, and beamforming matrices at all nodes to minimize the secondary network's outage probability. To address this problem, we propose a two-step solution. The first step establishes closedform expressions for the PS ratios at each SU and secondary relay's power control factor. Furthermore, in the second step, interference alignment (IA) is used to design proper precoding and decoding matrices for managing the interference between secondary and primary networks. We choose IA matrices based on the minimum mean square error (MMSE) iterative algorithm. The simulation results demonstrate a significant decrease in the outage probability for the proposed scheme compared to the benchmark schemes, with an average reduction of more than two orders of magnitude achieved

    Application of Smart Antenna Technologies in Simultaneous Wireless Information and Power Transfer

    Full text link
    Simultaneous wireless information and power transfer (SWIPT) is a promising solution to increase the lifetime of wireless nodes and hence alleviate the energy bottleneck of energy constrained wireless networks. As an alternative to conventional energy harvesting techniques, SWIPT relies on the use of radio frequency signals, and is expected to bring some fundamental changes to the design of wireless communication networks. This article focuses on the application of advanced smart antenna technologies, including multiple-input multiple-output and relaying techniques, to SWIPT. These smart antenna technologies have the potential to significantly improve the energy efficiency and also the spectral efficiency of SWIPT. Different network topologies with single and multiple users are investigated, along with some promising solutions to achieve a favorable trade-off between system performance and complexity. A detailed discussion of future research challenges for the design of SWIPT systems is also provided

    Relay-Aided Communication in Large Interference Limited Wireless Networks

    Get PDF
    In recent years, the number of active wireless devices increases exponentially and it is, therefore, to expect that the interference increases as well. Interference between communication links is the major performance limiting factor in today's communication networks. Hence, the handling of the overall interference in a network is one major challenge in wireless communication networks of the future. If the interference signals are weak in comparison to the useful signal, they can be simply treated as noise. If the interference signals are strong in comparison to the useful signal, they can be reliably decoded and subtracted from the received signal at the receivers. However, in multiuser communication networks, the interference and the useful signal are often of comparable signal strength. The conventional approach to handle these interference signals is to orthogonalize the useful signal and the interference signals using, e.g., time division multiple access (TDMA) or frequency division multiple access (FDMA). In the past few years, instead of orthogonalization, interference alignment (IA) has been developed as an efficient technique to handle interference signals, especially in the high signal to noise ratio (SNR) region. The basic idea of IA is to align multiple interference signals in a particular subspace of reduced dimension at each receiver. The objective is to minimize the signal dimensions occupied by interference at each receiver. In order to perform IA, the receive space is divided into two disjoint subspaces, the useful signal subspace and the interference signal subspace. Each transmitting node designs its transmit filters in such a way that at each receiving node, all interference signals are within the interference subspace and only the useful signal is in the useful subspace. In this thesis, the focus is on large interference limited wireless communication networks. In contrast to the conventional use of relays, for extending the coverage, in this thesis, the relays are used to manipulate the effective end-to-end channel between the transmitters and receivers to perform IA in the network. Since the relays are used to assist the process of IA and not interested in the data streams transmitted by the nodes, amplify-and-forward relays are sufficient to support the process of IA. Therefore, the main focus of this thesis is on amplify-and-forward relays. Throughout this thesis, it is assumed that all nodes and relays are multi-antenna half-duplex devices. When considering large networks, the assumption that all nodes are connected to all relays does not hold due to physical propagation phenomena, e.g., high path loss and shadowing. In such large networks, the distances between different nodes may differ a lot, leading to links of considerably different signal strengths, where sufficiently weak links may be neglected. Hence, large networks are in general partially connected. In this thesis, three important interference-limited relay aided wireless network topologies are investigated, the partially connected relay aided multi-pair pair-wise communication network, the fully connected multi-group multi-way relaying network and the partially connected multi-group multi-way relaying network. For each of these topologies, new algorithms to perform IA are developed in this thesis. First, a large partially connected relay aided pair-wise communication network is considered. The concept of an appropriate partitioning of a partially connected network into subnetworks which are themselves fully connected is introduced. Each of these subnetworks contains a single relay and all nodes being connected to this relay. Some nodes or even communication pairs may be connected to multiple relays. The bidirectional pair-wise communication between the nodes takes place via the intermediate relays, using the two-way relaying protocol. Only relays which are connected to both nodes of a communication pair can serve this pair. Hence, it is assumed that all communication pairs in the entire network are served by at least one relay. The most challenging part of such a partially connected network is the handling of nodes which are connected to multiple relays. Hence, techniques called simultaneous signal alignment (SSA) and simultaneous channel alignment (SCA), are proposed to perform signal alignment (SA) and channel alignment (CA) with multiple relays simultaneously. SA means that all nodes transmit to the relay in such a way that the signals of each communicating pair are pair-wise aligned at the relay. For CA, which is dual to SA, the receive filter of each node is designed such that the effective channels between the relay and both nodes of a communicating pair span the same subspace. A closed-form solution to perform IA in this network topology is obtained and the properness conditions for SSA and SCA are derived. It is shown that local channel state information (CSI) is sufficient to perform IA in partially connected networks, whereas in fully connected relay aided networks, global CSI is required in general. Through simulations, it is shown that the proposed closed-form solution achieves more degrees of freedom (DoF) than the reference algorithms and has better sum-rate performance, especially in the high SNR-region. Especially in large wireless networks, it may happen that not both nodes of a communication pair are connected to the same relays. If a single node of a communication pair is in addition connected to a relay which, therefore, cannot assist the communication, this node receives only interference and no useful signal from this relay. Such a node suffers from inter-subnetwork interference, due to the connection by an inter-subnetwork link to the additional relay. Hence, in this thesis, a closed form algorithm which minimizes the inter-subnetwork interference power in the whole partially connected network is proposed and the properness conditions are derived. The condition under which an interference free-communication can be achieved by the proposed inter-subnetwork interference power minimization algorithm is derived. Further, it is shown that the proposed inter-subnetwork interference power minimization algorithm achieves a higher sum rate in comparison to the considered reference algorithm. Secondly, a fully connected multi-group multi-way relaying networks is considered. In such a network, multiple nodes form a group and each node wants to share its message with all other nodes in its group via an intermediate relay. The group-wise communication between the nodes inside a group takes place via the intermediate relay, using a transmission strategy considering several multiple access (MAC) phases and several multicast (MC) phases, in general. In this thesis, a multicast IA algorithm to handle the interference in such a network is proposed. The idea of the proposed algorithm is that in each of the MC phases, a multiple input multiple output (MIMO) interference multicast channel is created by separating the antennas of the relay into as many clusters as groups in the network. Each of these clusters serves a specific group of nodes and transmits in such a way that the signals transmitted from different clusters are aligned at the receiving nodes of the non-intended multicast groups. It is shown that the minimum required number of antennas at the relay is independent of the number of nodes per group, which is an important property since the number of antennas available at the relay is limited in general. Furthermore, the properness conditions for the proposed multicast IA algorithm are derived. It is shown that the proposed multicast algorithm outperforms a reference algorithm for a broad range of SNR values, while still requiring less antennas at the relay. Finally, a large partially connected multi-group multi-way relay network is considered. In contrast to the fully connected multi-group multi-way relaying network, multiple relays are considered in this partially connected network. Such a partially connected network can be partitioned into subnetworks that are themselves fully connected. Hence, such a partially connected network consists of multiple subnetworks, where each of these contains a single relay and all groups of nodes which are connected to this relay. Each group of nodes may be connected to one or multiple relays. This means that not all groups of nodes are connected to all relays in the network. However, any group is connected to at least one relay which serves this group of nodes. The group-wise exchange of data between the nodes inside a group is performed via the multi-way relaying protocol. The most challenging part of such a partially connected network is the handling of the nodes inside groups which are connected to multiple relays. To overcome this challenge, new techniques called simultaneous group signal alignment (SGSA) and simultaneous group channel alignment (SGCA) are introduced to perform SA and CA in partially connected multi-group multi-way relaying networks. A closed-form IA solution for this network topology is obtained and the properness conditions for the solvability of SGSA and SGCA are derived. It is shown that the proposed IA algorithm outperforms the reference algorithm in terms of sum rate and DoF
    • …
    corecore