Inter-cell collaborative spectrum monitoring for cognitive cellular networks in fading environment

We propose a novel inter-cell power allocation for multi-carrier cognitive cellular networks. The proposed scheme incorporates the network-wide primary service communication activity into sub-channel power allocation. To model the primary service activity we define sub-channel activity index (SAI). SAI is then evaluated through a simple yet efficient collaborative spectrum monitoring scheme with very low signaling overhead. Corresponding to a secondary user transmission over a sub-channel, a utility function is defined which is a decreasing function of SAI, and an increasing function of the sub-channel achievable rate. Optimal power allocation is then formulated to maximize the total secondary base station (SBS) utility, subject to SBS transmit power, and primary system collision probability constraints. The sub-optimal solutions to the non-convex optimization are then obtained utilizing dual decomposition method. Comparing with a cognitive cellular network with no signalling among the SBSs, where SBS adopts equal sub-channel power allocation, simulation results indicate a significant gain on the achievable rate. We further compare the rate performance with an ideal system in which perfect interference channel state, and spectrum sensing information are available at the SBS and a combination of underlay and overlay access techniques are adopted. Comparing to the ideal system, the proposed method requires significantly lower signaling overhead while its rate performance closely follows the ideal access

Applications of Repeated Games in Wireless Networks: A Survey

A repeated game is an effective tool to model interactions and conflicts for players aiming to achieve their objectives in a long-term basis. Contrary to static noncooperative games that model an interaction among players in only one period, in repeated games, interactions of players repeat for multiple periods; and thus the players become aware of other players' past behaviors and their future benefits, and will adapt their behavior accordingly. In wireless networks, conflicts among wireless nodes can lead to selfish behaviors, resulting in poor network performances and detrimental individual payoffs. In this paper, we survey the applications of repeated games in different wireless networks. The main goal is to demonstrate the use of repeated games to encourage wireless nodes to cooperate, thereby improving network performances and avoiding network disruption due to selfish behaviors. Furthermore, various problems in wireless networks and variations of repeated game models together with the corresponding solutions are discussed in this survey. Finally, we outline some open issues and future research directions.Comment: 32 pages, 15 figures, 5 tables, 168 reference

NOMA based resource allocation and mobility enhancement framework for IoT in next generation cellular networks

With the unprecedented technological advances witnessed in the last two decades, more devices are connected to the internet, forming what is called internet of things (IoT). IoT devices with heterogeneous characteristics and quality of experience (QoE) requirements may engage in dynamic spectrum market due to scarcity of radio resources. We propose a framework to efficiently quantify and supply radio resources to the IoT devices by developing intelligent systems. The primary goal of the paper is to study the characteristics of the next generation of cellular networks with non-orthogonal multiple access (NOMA) to enable connectivity to clustered IoT devices. First, we demonstrate how the distribution and QoE requirements of IoT devices impact the required number of radio resources in real time. Second, we prove that using an extended auction algorithm by implementing a series of complementary functions, enhance the radio resource utilization efficiency. The results show substantial reduction in the number of sub-carriers required when compared to conventional orthogonal multiple access (OMA) and the intelligent clustering is scalable and adaptable to the cellular environment. Ability to move spectrum usages from one cluster to other clusters after borrowing when a cluster has less user or move out of the boundary is another soft feature that contributes to the reported radio resource utilization efficiency. Moreover, the proposed framework provides IoT service providers cost estimation to control their spectrum acquisition to achieve required quality of service (QoS) with guaranteed bit rate (GBR) and non-guaranteed bit rate (Non-GBR)

Hybrid Satellite-Terrestrial Communication Networks for the Maritime Internet of Things: Key Technologies, Opportunities, and Challenges

With the rapid development of marine activities, there has been an increasing number of maritime mobile terminals, as well as a growing demand for high-speed and ultra-reliable maritime communications to keep them connected. Traditionally, the maritime Internet of Things (IoT) is enabled by maritime satellites. However, satellites are seriously restricted by their high latency and relatively low data rate. As an alternative, shore & island-based base stations (BSs) can be built to extend the coverage of terrestrial networks using fourth-generation (4G), fifth-generation (5G), and beyond 5G services. Unmanned aerial vehicles can also be exploited to serve as aerial maritime BSs. Despite of all these approaches, there are still open issues for an efficient maritime communication network (MCN). For example, due to the complicated electromagnetic propagation environment, the limited geometrically available BS sites, and rigorous service demands from mission-critical applications, conventional communication and networking theories and methods should be tailored for maritime scenarios. Towards this end, we provide a survey on the demand for maritime communications, the state-of-the-art MCNs, and key technologies for enhancing transmission efficiency, extending network coverage, and provisioning maritime-specific services. Future challenges in developing an environment-aware, service-driven, and integrated satellite-air-ground MCN to be smart enough to utilize external auxiliary information, e.g., sea state and atmosphere conditions, are also discussed

Spectrum sharing systems for improving spectral efficiency in cognitive cellular network

Since spectrum is the invisible infrastructure that powers the wireless communication, the demand has been exceptionally increasing in recent years after the implementation of 4G and immense data requirements of 5G due to the applications, such as Internet-of-Things (IoT). Therefore, the effective optimization of the use of spectrum is immediately needed than ever before. The spectrum sensing is the prerequisite for optimal resource allocation in cognitive radio networks (CRN). Therefore, the spectrum sensing in wireless system with lower latency requirements is proposed first. In such systems with high spatial density of the base stations and users/objects, spectrum sharing enables spectrum reuse across very small regions. The proposed method in this Thesis is a multi-channel cooperative spectrum sensing technique, in which an independent network of sensors, namely, spectrum monitoring network, detects the spectrum availability. The locally aggregated decision in each zone associated with the zone aggregator (ZA) location is then passed to a decision fusion centre (DFC). The secondary base station (SBS) accordingly allocates the available channels to secondary users to maximize the spectral efficiency. The function of the DFC is formulated as an optimization problem with the objective of maximizing the spectral efficiency. The optimal detection threshold is obtained for different cases with various spatial densities of ZAs and SBSs. It is further shown that the proposed method reduces the spectrum sensing latency and results in a higher spectrum efficiency. Furthermore, a novel power allocation scheme for multicell CRN is proposed where the subchannel power allocation is performed by incorporating network-wide primary system communication activity. A collaborative subchannel monitoring scheme is proposed to evaluate the aggregated subchannel activity index (ASAI) to indicate the activity levels of primary users. Two utility functions are then defined to characterize the spectral efficiency (SE) and energy efficiency (EE) as a function of ASAI to formulate a utility maximization problem. The optimal transmit power allocation is then obtained with the objective of maximizing the total utility at the SBS, subject to maximum SBS transmit power and collision probability constraint at the primary receivers. Since optimal EE and SE are two contradicting objectives to obtain the transmit power allocation, the design approach to handle both EE and SE as a function of common network parameter, i.e., ASAI, is provided which ultimately proves the quantitative insights on efficient system design. Extensive simulation results confirm the analytical results and indicate a significant improvement in sensing latency and accuracy and a significant gain against the benchmark models on the rate performance, despite the proposed methods perform with lower signalling overhead