A process planning system with feature based neural network search strategy for aluminum extrusion die manufacturing

Aluminum extrusion die manufacturing is a critical task for productive improvement and increasing potential of competition in aluminum extrusion industry. It causes to meet the efficiency not only consistent quality but also time and production cost reduction. Die manufacturing consists first of die design and process planning in order to make a die for extruding the customer's requirement products. The efficiency of die design and process planning are based on the knowledge and experience of die design and die manufacturer experts. This knowledge has been formulated into a computer system called the knowledge-based system. It can be reused to support a new die design and process planning. Such knowledge can be extracted directly from die geometry which is composed of die features. These features are stored in die feature library to be prepared for producing a new die manufacturing. Die geometry is defined according to the characteristics of the profile so we can reuse die features from the previous similar profile design cases. This paper presents the CaseXpert Process Planning System for die manufacturing based on feature based neural network technique. Die manufacturing cases in the case library would be retrieved with searching and learning method by neural network for reusing or revising it to build a die design and process planning when a new case is similar with the previous die manufacturing cases. The results of the system are dies design and machining process. The system has been successfully tested, it has been proved that the system can reduce planning time and respond high consistent plans

Towards A Computational Intelligence Framework in Steel Product Quality and Cost Control

Steel is a fundamental raw material for all industries. It can be widely used in vari-ous fields, including construction, bridges, ships, containers, medical devices and cars. However, the production process of iron and steel is very perplexing, which consists of four processes: ironmaking, steelmaking, continuous casting and rolling. It is also extremely complicated to control the quality of steel during the full manufacturing pro-cess. Therefore, the quality control of steel is considered as a huge challenge for the whole steel industry. This thesis studies the quality control, taking the case of Nanjing Iron and Steel Group, and then provides new approaches for quality analysis, manage-ment and control of the industry. At present, Nanjing Iron and Steel Group has established a quality management and control system, which oversees many systems involved in the steel manufacturing. It poses a high statistical requirement for business professionals, resulting in a limited use of the system. A lot of data of quality has been collected in each system. At present, all systems mainly pay attention to the processing and analysis of the data after the manufacturing process, and the quality problems of the products are mainly tested by sampling-experimental method. This method cannot detect product quality or predict in advance the hidden quality issues in a timely manner. In the quality control system, the responsibilities and functions of different information systems involved are intricate. Each information system is merely responsible for storing the data of its corresponding functions. Hence, the data in each information system is relatively isolated, forming a data island. The iron and steel production process belongs to the process industry. The data in multiple information systems can be combined to analyze and predict the quality of products in depth and provide an early warning alert. Therefore, it is necessary to introduce new product quality control methods in the steel industry. With the waves of industry 4.0 and intelligent manufacturing, intelligent technology has also been in-troduced in the field of quality control to improve the competitiveness of the iron and steel enterprises in the industry. Applying intelligent technology can generate accurate quality analysis and optimal prediction results based on the data distributed in the fac-tory and determine the online adjustment of the production process. This not only gives rise to the product quality control, but is also beneficial to in the reduction of product costs. Inspired from this, this paper provide in-depth discussion in three chapters: (1) For scrap steel to be used as raw material, how to use artificial intelligence algorithms to evaluate its quality grade is studied in chapter 3; (2) the probability that the longi-tudinal crack occurs on the surface of continuous casting slab is studied in chapter 4;(3) The prediction of mechanical properties of finished steel plate in chapter 5. All these 3 chapters will serve as the technical support of quality control in iron and steel production

A big data MapReduce framework for fault diagnosis in cloud-based manufacturing

This research develops a MapReduce framework for automatic pattern recognition based on fault diagnosis by solving data imbalance problem in a cloud-based manufacturing (CBM). Fault diagnosis in a CBM system significantly contributes to reduce the product testing cost and enhances manufacturing quality. One of the major challenges facing the big data analytics in cloud-based manufacturing is handling of datasets, which are highly imbalanced in nature due to poor classification result when machine learning techniques are applied on such datasets. The framework proposed in this research uses a hybrid approach to deal with big dataset for smarter decisions. Furthermore, we compare the performance of radial basis function based Support Vector Machine classifier with standard techniques. Our findings suggest that the most important task in cloud-based manufacturing, is to predict the effect of data errors on quality due to highly imbalance unstructured dataset. The proposed framework is an original contribution to the body of literature, where our proposed MapReduce framework has been used for fault detection by managing data imbalance problem appropriately and relating it to firm’s profit function. The experimental results are validated using a case study of steel plate manufacturing fault diagnosis, with crucial performance matrices such as accuracy, specificity and sensitivity. A comparative study shows that the methods used in the proposed framework outperform the traditional ones

Industry/University Collaboration at the University of Michigan-Dearborn: A Focus on Relevant Technology

https://deepblue.lib.umich.edu/bitstream/2027.42/154106/1/kampfner1998.pd

Machine Learning Based Defect Detection in Robotic Wire Arc Additive Manufacturing

In the last ten years, research interests in various aspects of the Wire Arc Additive Manufacturing (WAAM) processes have grown exponentially. More recently, efforts to integrate an automatic quality assurance system for the WAAM process are increasing. No reliable online monitoring system for the WAAM process is a key gap to be filled for the commercial application of the technology, as it will enable the components produced by the process to be qualified for the relevant standards and hence be fit for use in critical applications in the aerospace or naval sectors. However, most of the existing monitoring methods only detect or solve issues from a specific sensor, no monitoring system integrated with different sensors or data sources is developed in WAAM in the last three years. In addition, complex principles and calculations of conventional algorithms make it hard to be applied in the manufacturing of WAAM as the character of a long manufacturing cycle. Intelligent algorithms provide in-built advantages in processing and analysing data, especially for large datasets generated during the long manufacturing cycles. In this research, in order to establish an intelligent WAAM defect detection system, two intelligent WAAM defect detection modules are developed successfully. The first module takes welding arc current / voltage signals during the deposition process as inputs and uses algorithms such as support vector machine (SVM) and incremental SVM to identify disturbances and continuously learn new defects. The incremental learning module achieved more than a 90% f1-score on new defects. The second module takes CCD images as inputs and uses object detection algorithms to predict the unfused defect during the WAAM manufacturing process with above 72% mAP. This research paves the path for developing an intelligent WAAM online monitoring system in the future. Together with process modelling, simulation and feedback control, it reveals the future opportunity for a digital twin system

Design and implementation of a compliant robot with force feedback and strategy planning software

Force-feedback robotics techniques are being developed for automated precision assembly and servicing of NASA space flight equipment. Design and implementation of a prototype robot which provides compliance and monitors forces is in progress. Computer software to specify assembly steps and makes force feedback adjustments during assembly are coded and tested for three generically different precision mating problems. A model program demonstrates that a suitably autonomous robot can plan its own strategy

Incorporating prefabrication processes into building information modelling

A thesis submitted in partial fulfilment of the requirements of University of Wolverhampton for the degree of Master of PhilosophyConventional business procedures are increasingly being replaced by dynamic and revolutionized growth due to the integration of Information and Communication technologies to meet changing business requirements. For survival in this highly competitive field of construction, the adaptation of new technologies enhancement and its revolution is considered as an essential requirement. Emerging ICT developments and new construction techniques have generated much needed discussion about how these two streams are connected together. The concept of prefabrication has grown in recent years to change conventional construction processes and simultaneously Building Information Model (BIM) has emerged to brighten up traditionally ill functioned business communication flow. Building Information Modelling in the early stage of building construction development provides the vehicle to bring the construction industry into line with other technically driven fields, such as Automotive and Aerospace. However, in the past this has not given much consideration towards interaction between itself and the much improved construction industry prefabrication process. This research has reviewed the current state of BIM capability in the Architecture Engineering and Construction (AEC) professions and establishes what is technologically possible. It also closely scrutinises one of the leading UK‟s cold rolled steel prefabricator‟s design and manufacturing process. The result of the findings leads the research to undertake in-depth benchmarking process to review and select an appropriate BIM application for live implementation. Upon selection, BIM application is customised to cater current and future design process of the above SME unit and implemented within a live construction project environment. Latest design process within SME unit along with BIM solution then evaluated against commercial criteria which determine the validity of incorporating construction industry prefabricating processes into current BIM applications iiand highlighted its overall benefits for the prefabricators and construction industry as a whole. Latter part of the research investigated the latest technological advancement available within BIM applications. Review has lead to highlight Application Programming Interface (API) available within the BIM applications. API provided much needed control mechanism to end users via standard programming mechanisms which captured during this research as the gateway to incorporate prefabricating information into BIM. Future Novel Framework developed based on API capabilities of the BIM applications in order to incorporate prefabricating processes into BIM Application

The NASA SBIR product catalog

The purpose of this catalog is to assist small business firms in making the community aware of products emerging from their efforts in the Small Business Innovation Research (SBIR) program. It contains descriptions of some products that have advanced into Phase 3 and others that are identified as prospective products. Both lists of products in this catalog are based on information supplied by NASA SBIR contractors in responding to an invitation to be represented in this document. Generally, all products suggested by the small firms were included in order to meet the goals of information exchange for SBIR results. Of the 444 SBIR contractors NASA queried, 137 provided information on 219 products. The catalog presents the product information in the technology areas listed in the table of contents. Within each area, the products are listed in alphabetical order by product name and are given identifying numbers. Also included is an alphabetical listing of the companies that have products described. This listing cross-references the product list and provides information on the business activity of each firm. In addition, there are three indexes: one a list of firms by states, one that lists the products according to NASA Centers that managed the SBIR projects, and one that lists the products by the relevant Technical Topics utilized in NASA's annual program solicitation under which each SBIR project was selected