Exploiting graphic processing units parallelism to improve intelligent data acquisition system performance in JET's correlation reflectometer

The performance of intelligent data acquisition systems relies heavily on their processing capabilities and local bus bandwidth, especially in applications with high sample rates or high number of channels. This is the case of the self adaptive sampling rate data acquisition system installed as a pilot experiment in KG8B correlation reflectometer at JET. The system, which is based on the ITMS platform, continuously adapts the sample rate during the acquisition depending on the signal bandwidth. In order to do so it must transfer acquired data to a memory buffer in the host processor and run heavy computational algorithms for each data block. The processing capabilities of the host CPU and the bandwidth of the PXI bus limit the maximum sample rate that can be achieved, therefore limiting the maximum bandwidth of the phenomena that can be studied. Graphic processing units (GPU) are becoming an alternative for speeding up compute intensive kernels of scientific, imaging and simulation applications. However, integrating this technology into data acquisition systems is not a straight forward step, not to mention exploiting their parallelism efficiently. This paper discusses the use of GPUs with new high speed data bus interfaces to improve the performance of the self adaptive sampling rate data acquisition system installed on JET. Integration issues are discussed and performance evaluations are presente

Developing vanadium redox flow technology on a 9-kW 26-kWh industrial scale test facility: Design review and early experiments

Redox Flow Batteries (RFBs) have a strong potential for future stationary storage, in view of the rapid expansion of renewable energy sources and smart grids. Their development and future success largely depend on the research on new materials, namely electrolytic solutions, membranes and electrodes, which is typically conduced on small single cells. A vast literature on these topics already exists. However, also the technological development plays a fundamental role in view of the successful application of RFBs in large plants. Despite that, very little research is reported in literature on the technology of large RFB systems. This paper presents the design, construction and early operation of a vanadium redox flow battery test facility of industrial size, dubbed IS-VRFB, where such technologies are developed and tested. In early experiments a peak power of 8.9 kW has been achieved with a stack specific power of 77Wkg−1. The maximum tested current density of 635 mA cm−2 has been reached with a cell voltage of 0.5 V, indicating that higher values can be obtained. The test facility is ready to be complemented with advanced diagnostic devices, including multichannel electrochemical impedance spectroscopy for studying aging and discrepancies in the cell behaviors

Tahap penguasaan, sikap dan minat pelajar Kolej Kemahiran Tinggi MARA terhadap mata pelajaran Bahasa Inggeris

Kajian ini dilakukan untuk mengenal pasti tahap penguasaan, sikap dan minat pelajar Kolej Kemahiran Tinggi Mara Sri Gading terhadap Bahasa Inggeris. Kajian yang dijalankan ini berbentuk deskriptif atau lebih dikenali sebagai kaedah tinjauan. Seramai 325 orang pelajar Diploma in Construction Technology dari Kolej Kemahiran Tinggi Mara di daerah Batu Pahat telah dipilih sebagai sampel dalam kajian ini. Data yang diperoleh melalui instrument soal selidik telah dianalisis untuk mendapatkan pengukuran min, sisihan piawai, dan Pekali Korelasi Pearson untuk melihat hubungan hasil dapatan data. Manakala, frekuensi dan peratusan digunakan bagi mengukur penguasaan pelajar. Hasil dapatan kajian menunjukkan bahawa tahap penguasaan Bahasa Inggeris pelajar adalah berada pada tahap sederhana manakala faktor utama yang mempengaruhi penguasaan Bahasa Inggeris tersebut adalah minat diikuti oleh sikap. Hasil dapatan menggunakan pekali Korelasi Pearson juga menunjukkan bahawa terdapat hubungan yang signifikan antara sikap dengan penguasaan Bahasa Inggeris dan antara minat dengan penguasaan Bahasa Inggeris. Kajian menunjukkan bahawa semakin positif sikap dan minat pelajar terhadap pengajaran dan pembelajaran Bahasa Inggeris semakin tinggi pencapaian mereka. Hasil daripada kajian ini diharapkan dapat membantu pelajar dalam meningkatkan penguasaan Bahasa Inggeris dengan memupuk sikap positif dalam diri serta meningkatkan minat mereka terhadap Bahasa Inggeris dengan lebih baik. Oleh itu, diharap kajian ini dapat memberi panduan kepada pihak-pihak yang terlibat dalam membuat kajian yang akan datang

Integration of embedded software with corporate information systems

This paper describes a methodology and corresponding tools to support the development of information systems, by integrating and interconnecting a network of embedded devices, that supervise processes in industrial environments, with the corporate information system of an organization. We discuss in detail how the LabVIEW environment was customized, so that it effectively supports a component based and data flow approach in the development of the gateway responsible for the integration

Effectiveness of OPC for systems integration in the process control information architecture

A Process is defined as the progression to some particular end or objective through a logical and orderly sequence of events. Various devices (e.g., actuators, limit switches, motors, sensors, etc.) play a significant role in making sure that the process attains its objective (e.g., maintaining the furnace temperature within an acceptable limit). To do these things effectively, manufacturers need to access data from the plant floor or devices and integrate those into their control applications, which maybe one of the off the shelf tools such as Supervisory Control and Data Acquisition (SCADA), Distributed Control System (DCS), or Programmable Logic Controllers (PLC). A number of vendors have devised their own Data Acquisition Networks or Process Control Architectures (e.g., PROFIBUS, DEVICENET, INTERBUS, ETHERNET I/P, etc.) that claim to be open to or interoperable with a number of third party devices or products that make process data available to the Process or Business Management level. In reality this is far from what it is claimed to be. Due to the problem of interoperability, a manufacturer is forced to be bound, either with the solutions provided by a single vendor or with the writing of a driver for each hardware device that is accessed by a process application. Today\u27s manufacturers are looking for advanced distributed object technologies that allow for seamless exchange of information across plant networks as a means of integrating the islands of automation that exist in their manufacturing operations. OLE for Process Control (OPC) works to significantly reduce the time, cost, and effort required in writing custom interfaces for hundreds of different intelligent devices and networks in use today. The objective of this thesis is to explore the OLE for Process Control (OPC) technology in depth by highlighting its need in industry and by using the OPC technology in an application in which data from a process controlled by Siemens Simatic S7 PLC are shared with a client application running in LabVTEW6i

The Internet of Simulation, a Specialisation of the Internet of Things with Simulation and Workflow as a Service (SIM/WFaaS)

Abstract: A trend seen in many industries is the increasing reliance on modelling and simulation to facilitate design, decision making and training. Previously, these models would operate in isolation but now there is a growing need to integrate and connect simulations together for co-simulation. In addition, the 21st century has seen the expansion of the Internet of Things (IoT) enabling the interconnectivity of smart devices across the Internet. In this paper we propose that an important, and often overlooked, domain of IoT is that of modelling and simulation. Expanding IoT to encompass interconnected simulations enables the potential for an Internet of Simulation whereby models and simulations are exposed to the wider internet and can be accessed on an "as-a-service" basis. The proposed IoS would need to manage simulation across heterogeneous infrastructures, temporal and causal aspects of simulations, as well as variations in data structures. Via the proposed Simulation as a Service (SIMaaS) and Workflow as a Service (WFaaS) constructs in IoS, highly complex simulation integration could be performed automatically, resulting in high fidelity system level simulations. Additionally, the potential for faster than real-time simulation afforded by IoS opens the possibility of connecting IoS to existing IoT infrastructure via a real-time bridge to facilitate decision making based on live data

Integrated scientific workflow management for the Emulab network testbed

Journal ArticleThe main forces that shaped current network testbeds were the needs for realism and scale. Now that several testbeds support large and complex experiments, management of experimentation processes and results has become more difficult and a barrier to high-quality systems research. The popularity of network testbeds means that new tools for managing experiment workflows, addressing the ready-made base of testbed users, can have important and significant impacts. We are now evolving Emulab, our large and popular network testbed, to support experiments that are organized around scientific workflows. This paper summarizes the opportunities in this area, the new approaches we are taking, our implementation in progress, and the challenges in adapting scientific workflow concepts for testbed-based research. With our system, we expect to demonstrate that a network testbed with integrated scientific workflow management can be an important tool to aid research in networking and distributed systems

Heterogeneous information systems integration: organizations and methodologies

In this paper, a methodology for integrating heterogeneous industrial information systems is presented. The methodology is strongly based on the extensive reuse of already-made components and is conceptually divided in three levels, one for each kind of designer that is typically involved in this type of projects. To accomplish a better integration of the activities and tools necessary to develop industrial information systems with the proposed methodology, three appropriate organizational configurations are adopted.Fundação para a Ciência e a Tecnologia; Fundo Europeu de Desenvolvimento Regional - Methodes: Methodologies and Tools for Developing Complex Real-Time Embedded Systems" - POSI/37334/CHS/2001