11,268 research outputs found
Future RAN architecture: SD-RAN through a general-purpose processing platform
In this article, we identify and study the potential of an integrated deployment solution for energy-efficient cellular networks combining the strengths of two very active current research themes: 1) software-defined radio access networks (SD-RANs) and 2) decoupled signaling and data transmissions, or beyond cellular green generation (BCG2) architecture, for enhanced energy efficiency. While SD-RAN envisions a decoupled centralized control plane and data-forwarding plane for flexible control, the BCG2 architecture calls for decoupling coverage from the capacity and coverage provided through an always-on low-power signaling node for a larger geographical area; the capacity is catered by various on-demand data nodes for maximum energy efficiency. In this article, we show that a combined approach that brings both specifications together can not only achieve greater benefits but also facilitate faster realization of both technologies. We propose the idea and design of a signaling controller that acts as a signaling node to provide always-on coverage, consuming low power, and at the same time host the control plane functions for the SDRAN through a general-purpose processing platform. The phantom cell concept is also a similar idea where a normal macrocell provides interference control to densely deployed small cells, although our initial results show that the integrated architecture has a much greater potential for energy savings than phantom cells
Millimeter-wave Evolution for 5G Cellular Networks
Triggered by the explosion of mobile traffic, 5G (5th Generation) cellular
network requires evolution to increase the system rate 1000 times higher than
the current systems in 10 years. Motivated by this common problem, there are
several studies to integrate mm-wave access into current cellular networks as
multi-band heterogeneous networks to exploit the ultra-wideband aspect of the
mm-wave band. The authors of this paper have proposed comprehensive
architecture of cellular networks with mm-wave access, where mm-wave small cell
basestations and a conventional macro basestation are connected to
Centralized-RAN (C-RAN) to effectively operate the system by enabling power
efficient seamless handover as well as centralized resource control including
dynamic cell structuring to match the limited coverage of mm-wave access with
high traffic user locations via user-plane/control-plane splitting. In this
paper, to prove the effectiveness of the proposed 5G cellular networks with
mm-wave access, system level simulation is conducted by introducing an expected
future traffic model, a measurement based mm-wave propagation model, and a
centralized cell association algorithm by exploiting the C-RAN architecture.
The numerical results show the effectiveness of the proposed network to realize
1000 times higher system rate than the current network in 10 years which is not
achieved by the small cells using commonly considered 3.5 GHz band.
Furthermore, the paper also gives latest status of mm-wave devices and
regulations to show the feasibility of using mm-wave in the 5G systems.Comment: 17 pages, 12 figures, accepted to be published in IEICE Transactions
on Communications. (Mar. 2015
Optimal channel allocation with dynamic power control in cellular networks
Techniques for channel allocation in cellular networks have been an area of
intense research interest for many years. An efficient channel allocation
scheme can significantly reduce call-blocking and calldropping probabilities.
Another important issue is to effectively manage the power requirements for
communication. An efficient power control strategy leads to reduced power
consumption and improved signal quality. In this paper, we present a novel
integer linear program (ILP) formulation that jointly optimizes channel
allocation and power control for incoming calls, based on the
carrier-to-interference ratio (CIR). In our approach we use a hybrid channel
assignment scheme, where an incoming call is admitted only if a suitable
channel is found such that the CIR of all ongoing calls on that channel, as
well as that of the new call, will be above a specified value. Our formulation
also guarantees that the overall power requirement for the selected channel
will be minimized as much as possible and that no ongoing calls will be dropped
as a result of admitting the new call. We have run simulations on a benchmark
49 cell environment with 70 channels to investigate the effect of different
parameters such as the desired CIR. The results indicate that our approach
leads to significant improvements over existing techniques.Comment: 11 page
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
Quantifying Potential Energy Efficiency Gain in Green Cellular Wireless Networks
Conventional cellular wireless networks were designed with the purpose of
providing high throughput for the user and high capacity for the service
provider, without any provisions of energy efficiency. As a result, these
networks have an enormous Carbon footprint. In this paper, we describe the
sources of the inefficiencies in such networks. First we present results of the
studies on how much Carbon footprint such networks generate. We also discuss
how much more mobile traffic is expected to increase so that this Carbon
footprint will even increase tremendously more. We then discuss specific
sources of inefficiency and potential sources of improvement at the physical
layer as well as at higher layers of the communication protocol hierarchy. In
particular, considering that most of the energy inefficiency in cellular
wireless networks is at the base stations, we discuss multi-tier networks and
point to the potential of exploiting mobility patterns in order to use base
station energy judiciously. We then investigate potential methods to reduce
this inefficiency and quantify their individual contributions. By a
consideration of the combination of all potential gains, we conclude that an
improvement in energy consumption in cellular wireless networks by two orders
of magnitude, or even more, is possible.Comment: arXiv admin note: text overlap with arXiv:1210.843
- …