An efficient genetic algorithm for large-scale transmit power control of dense and robust wireless networks in harsh industrial environments

The industrial wireless local area network (IWLAN) is increasingly dense, due to not only the penetration of wireless applications to shop floors and warehouses, but also the rising need of redundancy for robust wireless coverage. Instead of simply powering on all access points (APs), there is an unavoidable need to dynamically control the transmit power of APs on a large scale, in order to minimize interference and adapt the coverage to the latest shadowing effects of dominant obstacles in an industrial indoor environment. To fulfill this need, this paper formulates a transmit power control (TPC) model that enables both powering on/off APs and transmit power calibration of each AP that is powered on. This TPC model uses an empirical one-slope path loss model considering three-dimensional obstacle shadowing effects, to enable accurate yet simple coverage prediction. An efficient genetic algorithm (GA), named GATPC, is designed to solve this TPC model even on a large scale. To this end, it leverages repair mechanism-based population initialization, crossover and mutation, parallelism as well as dedicated speedup measures. The GATPC was experimentally validated in a small-scale IWLAN that is deployed a real industrial indoor environment. It was further numerically demonstrated and benchmarked on both small- and large-scales, regarding the effectiveness and the scalability of TPC. Moreover, sensitivity analysis was performed to reveal the produced interference and the qualification rate of GATPC in function of varying target coverage percentage as well as number and placement direction of dominant obstacles. (C) 2018 Elsevier B.V. All rights reserved

An algorithm for optimal network planning and frequency channel assignment in indoor WLANs

The increased use of wireless local area networks has led to an increased interference and a reduced performance, as a high amount of access points are often operating on the same frequency channel. This paper presents a network planning algorithm that minimizes the number of access points required for a certain throughput and optimizes the frequency allocated to each AP, leading to reduced interference. The network planning algorithm is based on a heuristic and the frequency planning algorithm on a combination of a greedy algorithm and a Vertex-Coloring-Based Approach. The algorithm provides a good performance and has a limited computation time

Indoor Propagation Channel Models For Wireless Lan Based On 802.11b Standards At 2.4 Ghz Ism Band

The WLAN is a preferred choice of technology for internet connection in the building environment. The indoor models, reported in the literature are mostly studied in the 900 MHz band of cellular standard and quite scarce in the 2.4 GHz frequency band of WLAN 802.11 standard. The frequency band is also dedicated for the WiMAX technology in which deployment in the office environment is essential. In this thesis, the semi-empirical indoor Multi Wall Classic Extended (MWCE) channel model is proposed. The model is compared and evaluated with the empirical OS and other semi-empirical Multi Wall models obtained from the literature; the Multi Wall Classic (MWC) and Multi Wall Linear (MWL). The models are evaluated based on the accuracy of prediction at two floors of office environment in one of the telecommunication company building. The validity of the proposed model is evaluated through comparison with different models of similar type from the literature. The optimized model coefficients for all models, particularly for the wood/glass and brick/concrete the common wall obstacles in the building, are found. The behavior and characterization of all the models studied are investigated by evaluating the variation of the prediction error at several locations of the same propagation condition. The prediction from the MWCE model is significantly improved compared to the OS model. The MWCE model is also observed to have a high and consistent accuracy prediction, comparable with the MWC and MWL models. The accuracy of the MWCE model is also shown to compare closely with different models of similar type from the literature. With simple formulation without invoking too many details and high consistent accuracy prediction, the proposed MWCE model is suitable for prediction of WLAN signal in the indoor environment to be incorporated in the software planning tool

Applications of Soft Computing in Mobile and Wireless Communications

Soft computing is a synergistic combination of artificial intelligence methodologies to model and solve real world problems that are either impossible or too difficult to model mathematically. Furthermore, the use of conventional modeling techniques demands rigor, precision and certainty, which carry computational cost. On the other hand, soft computing utilizes computation, reasoning and inference to reduce computational cost by exploiting tolerance for imprecision, uncertainty, partial truth and approximation. In addition to computational cost savings, soft computing is an excellent platform for autonomic computing, owing to its roots in artificial intelligence. Wireless communication networks are associated with much uncertainty and imprecision due to a number of stochastic processes such as escalating number of access points, constantly changing propagation channels, sudden variations in network load and random mobility of users. This reality has fuelled numerous applications of soft computing techniques in mobile and wireless communications. This paper reviews various applications of the core soft computing methodologies in mobile and wireless communications

Relative signal strength coverage optimization in indoor and outdoor wireless LAN environments

Fading and obstacles constitute major threats to effective quality of service (QoS) delivery in wireless local area network (WLAN) environments. In this contribution, we investigate the signal quality of indoor and outdoor WLANs over a defined coverage area. We present experimental analysis of case studies that will be useful for further research and validate the system’s performance in practice. Using an optimized form of the pathloss models, a simulation of the system is carried out over short and extended coverage. Simulation results show that signal quality could be effectively managed to improve the system’s performance for both indoor and outdoor environments in the presence of fading and other environmental factors.Facultad de Informátic

Improving the Performance of Wireless LANs

This book quantifies the key factors of WLAN performance and describes methods for improvement. It provides theoretical background and empirical results for the optimum planning and deployment of indoor WLAN systems, explaining the fundamentals while supplying guidelines for design, modeling, and performance evaluation. It discusses environmental effects on WLAN systems, protocol redesign for routing and MAC, and traffic distribution; examines emerging and future network technologies; and includes radio propagation and site measurements, simulations for various network design scenarios, numerous illustrations, practical examples, and learning aids

Millimeter-wave Wireless LAN and its Extension toward 5G Heterogeneous Networks

Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are considered as a promising solution for gigabit short range wireless communication systems. IEEE standard 802.11ad, also known as WiGig, is standardized for the usage of the 60 GHz unlicensed band for wireless local area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved to support bandwidth-intensive multimedia applications. Exhaustive search along with beamforming (BF) is usually used to overcome 60 GHz channel propagation loss and accomplish data transmissions in such mmw WLANs. Because of its short range transmission with a high susceptibility to path blocking, multiple number of mmw access points (APs) should be used to fully cover a typical target environment for future high capacity multi-Gbps WLANs. Therefore, coordination among mmw APs is highly needed to overcome packet collisions resulting from un-coordinated exhaustive search BF and to increase the total capacity of mmw WLANs. In this paper, we firstly give the current status of mmw WLANs with our developed WiGig AP prototype. Then, we highlight the great need for coordinated transmissions among mmw APs as a key enabler for future high capacity mmw WLANs. Two different types of coordinated mmw WLAN architecture are introduced. One is the distributed antenna type architecture to realize centralized coordination, while the other is an autonomous coordination with the assistance of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet) architectures are also introduced to efficiently extend the coordinated mmw WLANs to be used for future 5th Generation (5G) cellular networks.Comment: 18 pages, 24 figures, accepted, invited paper

AROMA: Automatic Generation of Radio Maps for Localization Systems

WLAN localization has become an active research field recently. Due to the wide WLAN deployment, WLAN localization provides ubiquitous coverage and adds to the value of the wireless network by providing the location of its users without using any additional hardware. However, WLAN localization systems usually require constructing a radio map, which is a major barrier of WLAN localization systems' deployment. The radio map stores information about the signal strength from different signal strength streams at selected locations in the site of interest. Typical construction of a radio map involves measurements and calibrations making it a tedious and time-consuming operation. In this paper, we present the AROMA system that automatically constructs accurate active and passive radio maps for both device-based and device-free WLAN localization systems. AROMA has three main goals: high accuracy, low computational requirements, and minimum user overhead. To achieve high accuracy, AROMA uses 3D ray tracing enhanced with the uniform theory of diffraction (UTD) to model the electric field behavior and the human shadowing effect. AROMA also automates a number of routine tasks, such as importing building models and automatic sampling of the area of interest, to reduce the user's overhead. Finally, AROMA uses a number of optimization techniques to reduce the computational requirements. We present our system architecture and describe the details of its different components that allow AROMA to achieve its goals. We evaluate AROMA in two different testbeds. Our experiments show that the predicted signal strength differs from the measurements by a maximum average absolute error of 3.18 dBm achieving a maximum localization error of 2.44m for both the device-based and device-free cases.Comment: 14 pages, 17 figure

Exposure assessment of microwave ovens and impact on total exposure in WLANs

In situ exposure of electric fields of 11 microwave ovens is assessed in an occupational environment and in an office. Measurements as a function of distance without load and with a load of 275 ml of tap water were performed at distances of 1 m, a model of the electric field in a realistic environment is proposed. In an office scenario, switching on a microwave oven increases the median field strength from 91 to 145 mV m(-1) (+91 %) in a traditional Wireless Local Area Network (WLAN) deployment and from 44 to 92 mV m(-1) (+109 %) in an exposure-optimised WLAN deployment