Temporary Redundant Transmission Mechanism for SCTP Multihomed Hosts

In SCTP’s Concurrent Multipath Transfer, if data is sent to the destined IP(s) without knowledge of the paths condition, packets may be lost or delayed. This is because of the bursty nature of IP traffic and physical damage to the network. To offset these problems, network path status is examined using our new mechanism Multipath State Aware Concurrent Multipath Transfer using redundant transmission (MSACMT-RTv2). Here the status of multiple paths is analyzed, initially and periodically thereafter transmitted. After examination, paths priority is assigned before transmission. One path is temporarily employed as redundant path for the failure-expected path (FEP); this redundant path is used for transmitting redundant data. At the end of predefined period, reliability of the FEP is confirmed. If FEP is ensured to be reliable, temporary path is transformed into normal CMT path. MSACMT-RTv2 algorithm is simulated using the Delaware University ns-2 SCTP/CMT module (ns-2; V2.29). We present and discuss MSACMT-RTv2 performance in asymmetric path delay and with finite receiver buffer (rbuf) size. We extended our experiment to test robustness of this algorithm and inferred exhaustive result. It is inferred that our algorithm outperforms better in terms of increasing the throughput and reducing the latency than existing system

Design of multi-homing architecture for mobile hosts

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.This thesis proposes a new multi-homing mobile architecture for future heterogeneous network environment. First, a new multi-homed mobile architecture called Multi Network Switching enabled Mobile IPv6 (MNS-MIP6) is proposed which enables a Mobile Node (MN) having multiple communication paths between itself and its Correspondent Node (CN) to take full advantage of being multi-homed. Multiple communication paths exist because MN, CN, or both are simultaneously attached to multiple access networks. A new sub layer is introduced within IP layer of the host’s protocol stack. A context is established between the MN and the CN. Through this context, additional IP addresses are exchanged between the two. Our MNS-MIP6 architecture allows one communication to smoothly switch from one interface/communication path to another. This switch remains transparent to other layers above IP. Second, to make communication more reliable in multi-homed mobile environments, a new failure detection and recovery mechanism called Mobile Reach ability Protocol (M-REAP) is designed within the proposed MNS-MIP6 architecture. The analysis shows that our new mechanism makes communication more reliable than the existing failure detection and recovery procedures in multi-homed mobile environments. Third, a new network selection mechanism is introduced in the proposed architecture which enables a multi-homed MN to choose the network best suited for particular application traffic. A Policy Engine is defined which takes parameters from iv the available networks, compares them according to application profiles and user preferences, and chooses the best network. The results show that in multi-homed mobile environment, load can be shared among different networks/interfaces through our proposed load sharing mechanism. Fourth, a seamless handover procedure is introduced in the system which enables multi-homed MN to seamlessly roam in a heterogeneous network environment. Layer 2 triggers are defined which assist in handover process. When Signal to Noise Ratio (SNR) on a currently used active interface becomes low, a switch is made to a different active interface. We show through mathematical and simulation analysis that our proposed scheme outperforms the existing popular handover management enhancement scheme in MIPv6 networks namely Fast Handover for MIPv6 (FMIPv6). Finally, a mechanism is introduced to allow legacy hosts to communicate with MNS-MIP6 MNs and gain the benefits of reliability, load sharing and seamless handover. The mechanism involves introducing middle boxes in CN’s network. These boxes are called Proxy-MNS boxes. Context is established between the middle boxes and a multi-homed MN

Reliable Server Pooling - Evaluierung, Optimierung und Erweiterung einer neuen IETF-Architektur

The Reliable Server Pooling (RSerPool) architecture currently under standardization by the IETF RSerPool Working Group is an overlay network framework to provide server replication and session failover capabilities to applications using it. These functionalities as such are not new, but their combination into one generic, application-independent framework is. Initial goal of this thesis is to gain insight into the complex RSerPool mechanisms by performing experimental and simulative proof-of-concept tests. The further goals are to systematically validate the RSerPool architecture and its protocols, provide improvements and optimizations where necessary and propose extensions if useful. Based on these evaluations, recommendations to implementers and users of RSerPool should be provided, giving guidelines for the tuning of system parameters and the appropriate configuration of application scenarios. In particular, it is also a goal to transfer insights, optimizations and extensions of the RSerPool protocols from simulation to reality and also to bring the achievements from research into application by supporting and contributing relevant results to the IETF's ongoing RSerPool standardization process. To achieve the described goals, a prototype implementation as well as a simulation model are designed and realized at first. Using a generic application model and appropriate performance metrics, the performance of RSerPool systems in failure-free and server failure scenarios is systematically evaluated in order to identify critical parameter ranges and problematic protocol behaviour. Improvements developed as result of these performance analyses are evaluated and finally contributed into the standardization process of RSerPool

Concurrent Multipath Transfer: Scheduling, Modelling, and Congestion Window Management

Known as smartphones, multihomed devices like the iPhone and BlackBerry can simultaneously connect to Wi-Fi and 4G LTE networks. Unfortunately, due to the architectural constraints of standard transport layer protocols like the transmission control protocol (TCP), an Internet application (e.g., a file transfer) can use only one access network at a time. Due to recent developments, however, concurrent multipath transfer (CMT) using the stream control transmission protocol (SCTP) can enable multihomed devices to exploit additional network resources for transport layer communications. In this thesis we explore a variety of techniques aimed at CMT and multihomed devices, such as: packet scheduling, transport layer modelling, and resource management. Some of our accomplishments include, but are not limited to: enhanced performance of CMT under delay-based disparity, a tractable framework for modelling the throughput of CMT, a comparison of modelling techniques for SCTP, a new congestion window update policy for CMT, and efficient use of system resources through optimization. Since the demand for a better communications system is always on the horizon, it is our goal to further the research and inspire others to embrace CMT as a viable network architecture; in hopes that someday CMT will become a standard part of smartphone technology

Recent Advances in Wireless Communications and Networks

This book focuses on the current hottest issues from the lowest layers to the upper layers of wireless communication networks and provides "real-time" research progress on these issues. The authors have made every effort to systematically organize the information on these topics to make it easily accessible to readers of any level. This book also maintains the balance between current research results and their theoretical support. In this book, a variety of novel techniques in wireless communications and networks are investigated. The authors attempt to present these topics in detail. Insightful and reader-friendly descriptions are presented to nourish readers of any level, from practicing and knowledgeable communication engineers to beginning or professional researchers. All interested readers can easily find noteworthy materials in much greater detail than in previous publications and in the references cited in these chapters

Design of multi-homing architecture for mobile hosts

This thesis proposes a new multi-homing mobile architecture for future heterogeneous network environment. First, a new multi-homed mobile architecture called Multi Network Switching enabled Mobile IPv6 (MNS-MIP6) is proposed which enables a Mobile Node (MN) having multiple communication paths between itself and its Correspondent Node (CN) to take full advantage of being multi-homed. Multiple communication paths exist because MN, CN, or both are simultaneously attached to multiple access networks. A new sub layer is introduced within IP layer of the host’s protocol stack. A context is established between the MN and the CN. Through this context, additional IP addresses are exchanged between the two. Our MNS-MIP6 architecture allows one communication to smoothly switch from one interface/communication path to another. This switch remains transparent to other layers above IP. Second, to make communication more reliable in multi-homed mobile environments, a new failure detection and recovery mechanism called Mobile Reach ability Protocol (M-REAP) is designed within the proposed MNS-MIP6 architecture. The analysis shows that our new mechanism makes communication more reliable than the existing failure detection and recovery procedures in multi-homed mobile environments. Third, a new network selection mechanism is introduced in the proposed architecture which enables a multi-homed MN to choose the network best suited for particular application traffic. A Policy Engine is defined which takes parameters from iv the available networks, compares them according to application profiles and user preferences, and chooses the best network. The results show that in multi-homed mobile environment, load can be shared among different networks/interfaces through our proposed load sharing mechanism. Fourth, a seamless handover procedure is introduced in the system which enables multi-homed MN to seamlessly roam in a heterogeneous network environment. Layer 2 triggers are defined which assist in handover process. When Signal to Noise Ratio (SNR) on a currently used active interface becomes low, a switch is made to a different active interface. We show through mathematical and simulation analysis that our proposed scheme outperforms the existing popular handover management enhancement scheme in MIPv6 networks namely Fast Handover for MIPv6 (FMIPv6). Finally, a mechanism is introduced to allow legacy hosts to communicate with MNS-MIP6 MNs and gain the benefits of reliability, load sharing and seamless handover. The mechanism involves introducing middle boxes in CN’s network. These boxes are called Proxy-MNS boxes. Context is established between the middle boxes and a multi-homed MN.EThOS - Electronic Theses Online ServiceGBUnited Kingdo