The application of knowledge based systems to the abstraction of design and costing rules in bespoke pipe jointing systems

This thesis presents the work undertaken in the creation of a knowledge based system aimed at facilitating the design and cost estimation of bespoke pipe jointing systems. An overview of the problem domain is provided and the findings from a literature review on knowledge based systems and applications in manufacturing were used to provide initial guidance to the research. The overall investigation and development process involved the abstraction of design and costing rules from domain experts using a sub-set of the techniques reviewed and the development and implementation of the knowledge based system using an expert system approach, the soft systems methodology (SSM) and the system development lifecycle methodology. Based on the abstracted design and costing rules, the developed system automates the design of pipe jointing systems, and facilitates cost estimation process within third party configuration software. The developed system was validated using two case studies and was shown to provide the required outputs

Workshop proceedings of the 1st workshop on quality in modeling

Quality assessment and assurance constitute an important part of software engineering. The issues of software quality management are widely researched and approached from multiple perspectives and viewpoints. The introduction of a new paradigm in software development – namely Model Driven Development (MDD) and its variations (e.g., MDA [Model Driven Architecture], MDE [Model Driven Engineering], MBD [Model Based Development], MIC [Model Integrated Computing]) – raises new challenges in software quality management, and as such should be given a special attention. In particular, the issues of early quality assessment, based on models at a high abstraction level, and building (or customizing the existing) prediction models for software quality based on model metrics are of central importance for the software engineering community. The workshop is continuation of a series of workshops on consistency that have taken place during the subsequent annual UML conferences and recently MDA-FA. The idea behind this workshop is to extend the scope of interests and address a wide spectrum of problems related to MDD. It is also in line with the overall initiative of the shift from UML to MoDELS. The goal of this workshop is to gather researchers and practitioners interested in the emerging issues of quality in the context of MDD. The workshop is intended to provide a premier forum for discussions related to software quality and MDD. And the aims of the workshop are: - Presenting ongoing research related to quality in modeling in the context of MDD, - Defining and organizing issues related to quality in the MDD. The format of the workshop consists of two parts: presentation and discussion. The presentation part is aimed at reporting research results related to quality aspects in modeling. Seven papers were selected for the presentation out of 16 submissions; the selected papers are included in these proceedings. The discussion part is intended to be a forum for exchange of ideas related to understanding of quality and approaching it in a systematic way

Workshop proceedings of the 1st workshop on quality in modeling

Quality assessment and assurance constitute an important part of software engineering. The issues of software quality management are widely researched and approached from multiple perspectives and viewpoints. The introduction of a new paradigm in software development – namely Model Driven Development (MDD) and its variations (e.g., MDA [Model Driven Architecture], MDE [Model Driven Engineering], MBD [Model Based Development], MIC [Model Integrated Computing]) – raises new challenges in software quality management, and as such should be given a special attention. In particular, the issues of early quality assessment, based on models at a high abstraction level, and building (or customizing the existing) prediction models for software quality based on model metrics are of central importance for the software engineering community. The workshop is continuation of a series of workshops on consistency that have taken place during the subsequent annual UML conferences and recently MDA-FA. The idea behind this workshop is to extend the scope of interests and address a wide spectrum of problems related to MDD. It is also in line with the overall initiative of the shift from UML to MoDELS. The goal of this workshop is to gather researchers and practitioners interested in the emerging issues of quality in the context of MDD. The workshop is intended to provide a premier forum for discussions related to software quality and MDD. And the aims of the workshop are: - Presenting ongoing research related to quality in modeling in the context of MDD, - Defining and organizing issues related to quality in the MDD. The format of the workshop consists of two parts: presentation and discussion. The presentation part is aimed at reporting research results related to quality aspects in modeling. Seven papers were selected for the presentation out of 16 submissions; the selected papers are included in these proceedings. The discussion part is intended to be a forum for exchange of ideas related to understanding of quality and approaching it in a systematic way

Hybrid Multiresolution Simulation & Model Checking: Network-On-Chip Systems

abstract: Designers employ a variety of modeling theories and methodologies to create functional models of discrete network systems. These dynamical models are evaluated using verification and validation techniques throughout incremental design stages. Models created for these systems should directly represent their growing complexity with respect to composition and heterogeneity. Similar to software engineering practices, incremental model design is required for complex system design. As a result, models at early increments are significantly simpler relative to real systems. While experimenting (verification or validation) on models at early increments are computationally less demanding, the results of these experiments are less trustworthy and less rewarding. At any increment of design, a set of tools and technique are required for controlling the complexity of models and experimentation. A complex system such as Network-on-Chip (NoC) may benefit from incremental design stages. Current design methods for NoC rely on multiple models developed using various modeling frameworks. It is useful to develop frameworks that can formalize the relationships among these models. Fine-grain models are derived using their coarse-grain counterparts. Moreover, validation and verification capability at various design stages enabled through disciplined model conversion is very beneficial. In this research, Multiresolution Modeling (MRM) is used for system level design of NoC. MRM aids in creating a family of models at different levels of scale and complexity with well-formed relationships. In addition, a variant of the Discrete Event System Specification (DEVS) formalism is proposed which supports model checking. Hierarchical models of Network-on-Chip components may be created at different resolutions while each model can be validated using discrete-event simulation and verified via state exploration. System property expressions are defined in the DEVS language and developed as Transducers which can be applied seamlessly for model checking and simulation purposes. Multiresolution Modeling with verification and validation capabilities of this framework complement one another. MRM manages the scale and complexity of models which in turn can reduces V&V time and effort and conversely the V&V helps ensure correctness of models at multiple resolutions. This framework is realized through extending the DEVS-Suite simulator and its applicability demonstrated for exemplar NoC models.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Improved management of issue dependencies in issue trackers of large collaborative projects

Issue trackers, such as Jira, have become the prevalent collaborative tools in software engineering for managing issues, such as requirements, development tasks, and software bugs. However, issue trackers inherently focus on the lifecycle of single issues, although issues have and express dependencies on other issues that constitute issue dependency networks in large complex collaborative projects. The objective of this study is to develop supportive solutions for the improved management of dependent issues in an issue tracker. This study follows the Design Science methodology, consisting of eliciting drawbacks and constructing and evaluating a solution and system. The study was carried out in the context of The Qt Company's Jira, which exemplifies an actively used, almost two-decade-old issue tracker with over 100,000 issues. The drawbacks capture how users operate with issue trackers to handle issue information in large, collaborative, and long-lived projects. The basis of the solution is to keep issues and dependencies as separate objects and automatically construct an issue graph. Dependency detections complement the issue graph by proposing missing dependencies, while consistency checks and diagnoses identify conflicting issue priorities and release assignments. Jira's plugin and service-based system architecture realize the functional and quality concerns of the system implementation. We show how to adopt the intelligent supporting techniques of an issue tracker in a complex use context and a large data-set. The solution considers an integrated and holistic system view, practical applicability and utility, and the practical characteristics of issue data, such as inherent incompleteness.The work presented in this paper has been conducted within the scope of the Horizon 2020 project OpenReq, which is supported by the European Union under Grant Nr. 732463. We are grateful for the provision of the Finnish computing infrastructure to carry out the tests (persistent identifier urn:nbn:fi:research-infras-2016072533). This paper has been funded by the Spanish Ministerio de Ciencia e Innovacionúnder project / funding scheme PID2020-117191RB-I00 / AEI/10.13039/501100011033.Peer ReviewedPostprint (published version

Doctor of Philosophy

dissertationIn computer science, functional software testing is a method of ensuring that software gives expected output on specific inputs. Software testing is conducted to ensure desired levels of quality in light of uncertainty resulting from the complexity of software. Most of today's software is written by people and software development is a creative activity. However, due to the complexity of computer systems and software development processes, this activity leads to a mismatch between the expected software functionality and the implemented one. If not addressed in a timely and proper manner, this mismatch can cause serious consequences to users of the software, such as security and privacy breaches, financial loss, and adversarial human health issues. Because of manual effort, software testing is costly. Software testing that is performed without human intervention is automatic software testing and it is one way of addressing the issue. In this work, we build upon and extend several techniques for automatic software testing. The techniques do not require any guidance from the user. Goals that are achieved with the techniques are checking for yet unknown errors, automatically testing object-oriented software, and detecting malicious software. To meet these goals, we explored several techniques and related challenges: automatic test case generation, runtime verification, dynamic symbolic execution, and the type and size of test inputs for efficient detection of malicious software via machine learning. Our work targets software written in the Java programming language, though the techniques are general and applicable to other languages. We performed an extensive evaluation on freely available Java software projects, a flight collision avoidance system, and thousands of applications for the Android operating system. Evaluation results show to what extent dynamic symbolic execution is applicable in testing object-oriented software, they show correctness of the flight system on millions of automatically customized and generated test cases, and they show that simple and relatively small inputs in random testing can lead to effective malicious software detection