Coherent Optical OFDM Modem Employing Artificial Neural Networks for Dispersion and Nonlinearity Compensation in a Long-Haul Transmission System

In order to satisfy the ever increasing demand for the bandwidth requirement in broadband services the optical orthogonal frequency division multiplexing (OOFDM) scheme is being considered as a promising technique for future high-capacity optical networks. The aim of this thesis is to investigate, theoretically, the feasibility of implementing the coherent optical OFDM (CO-OOFDM) technique in long haul transmission networks. For CO-OOFDM and Fast-OFDM systems a set of modulation formats dependent analogue to digital converter (ADC) clipping ratio and the quantization bit have been identified, moreover, CO-OOFDM is more resilient to the chromatic dispersion (CD) when compared to the bandwidth efficient Fast-OFDM scheme. For CO-OOFDM systems numerical simulations are undertaken to investigate the effect of the number of sub-carriers, the cyclic prefix (CP), and ADC associated parameters such as the sampling speed, the clipping ratio, and the quantisation bit on the system performance over single mode fibre (SMF) links for data rates up to 80 Gb/s. The use of a large number of sub-carriers is more effective in combating the fibre CD compared to employing a long CP. Moreover, in the presence of fibre non-linearities identifying the optimum number of sub-carriers is a crucial factor in determining the modem performance. For a range of signal data rates up to 40 Gb/s, a set of data rate and transmission distance-dependent optimum ADC parameters are identified in this work. These parameters give rise to a negligible clipping and quantisation noise, moreover, ADC sampling speed can increase the dispersion tolerance while transmitting over SMF links. In addition, simulation results show that the use of adaptive modulation schemes improves the spectrum usage efficiency, thus resulting in higher tolerance to the CD when compared to the case where identical modulation formats are adopted across all sub-carriers. For a given transmission distance utilizing an artificial neural networks (ANN) equalizer improves the system bit error rate (BER) performance by a factor of 50% and 70%, respectively when considering SMF firstly CD and secondly nonlinear effects with CD. Moreover, for a fixed BER of 10-3 utilizing ANN increases the transmission distance by 1.87 times and 2 times, respectively while considering SMF CD and nonlinear effects. The proposed ANN equalizer performs more efficiently in combating SMF non-linearities than the previously published Kerr nonlinearity electrical compensation technique by a factor of 7

Application of wavelets and artificial neural network for indoor optical wireless communication systems

Abstract This study investigates the use of error control code, discrete wavelet transform (DWT) and artificial neural network (ANN) to improve the link performance of an indoor optical wireless communication in a physical channel. The key constraints that barricade the realization of unlimited bandwidth in optical wavelengths are the eye-safety issue, the ambient light interference and the multipath induced intersymbol interference (ISI). Eye-safety limits the maximum average transmitted optical power. The rational solution is to use power efficient modulation techniques. Further reduction in transmitted power can be achieved using error control coding. A mathematical analysis of retransmission scheme is investigated for variable length modulation techniques and verified using computer simulations. Though the retransmission scheme is simple to implement, the shortfall in terms of reduced throughput will limit higher code gain. Due to practical limitation, the block code cannot be applied to the variable length modulation techniques and hence the convolutional code is the only possible option. The upper bound for slot error probability of the convolutional coded dual header pulse interval modulation (DH-PIM) and digital pulse interval modulation (DPIM) schemes are calculated and verified using simulations. The power penalty due to fluorescent light interference (FL I) is very high in indoor optical channel making the optical link practically infeasible. A denoising method based on a DWT to remove the FLI from the received signal is devised. The received signal is first decomposed into different DWT levels; the FLI is then removed from the signal before reconstructing the signal. A significant reduction in the power penalty is observed using DWT. Comparative study of DWT based denoising scheme with that of the high pass filter (HPF) show that DWT not only can match the best performance obtain using a HPF, but also offers a reduced complexity and design simplicity. The high power penalty due to multipath induced ISI makes a diffuse optical link practically infeasible at higher data rates. An ANN based linear and DF architectures are investigated to compensation the ISI. Unlike the unequalized cases, the equalized schemes don‘t show infinite power penalty and a significant performance improvement is observed for all modulation schemes. The comparative studies substantiate that ANN based equalizers match the performance of the traditional equalizers for all channel conditions with a reduced training data sequence. The study of the combined effect of the FLI and ISI shows that DWT-ANN based receiver perform equally well in the present of both interference. Adaptive decoding of error control code can offer flexibility of selecting the best possible encoder in a given environment. A suboptimal ?soft‘ sliding block convolutional decoder based on the ANN and a 1/2 rate convolutional code with a constraint length is investigated. Results show that the ANN decoder can match the performance of optimal Viterbi decoder for hard decision decoding but with slightly inferior performance compared to soft decision decoding. This provides a foundation for further investigation of the ANN decoder for convolutional code with higher constraint length values. Finally, the proposed DWT-ANN receiver is practically realized in digital signal processing (DSP) board. The output from the DSP board is compared with the computer simulations and found that the difference is marginal. However, the difference in results doesn‘t affect the overall error probability and identical error probability is obtained for DSP output and computer simulations

Application of wavelets and artificial neural network for indoor optical wireless communication systems

This study investigates the use of error control code, discrete wavelet transform (DWT) and artificial neural network (ANN) to improve the link performance of an indoor optical wireless communication in a physical channel. The key constraints that barricade the realization of unlimited bandwidth in optical wavelengths are the eye-safety issue, the ambient light interference and the multipath induced intersymbol interference (ISI). Eye-safety limits the maximum average transmitted optical power. The rational solution is to use power efficient modulation techniques. Further reduction in transmitted power can be achieved using error control coding. A mathematical analysis of retransmission scheme is investigated for variable length modulation techniques and verified using computer simulations. Though the retransmission scheme is simple to implement, the shortfall in terms of reduced throughput will limit higher code gain. Due to practical limitation, the block code cannot be applied to the variable length modulation techniques and hence the convolutional code is the only possible option. The upper bound for slot error probability of the convolutional coded dual header pulse interval modulation (DH-PIM) and digital pulse interval modulation (DPIM) schemes are calculated and verified using simulations. The power penalty due to fluorescent light interference (FL I) is very high in indoor optical channel making the optical link practically infeasible. A denoising method based on a DWT to remove the FLI from the received signal is devised. The received signal is first decomposed into different DWT levels; the FLI is then removed from the signal before reconstructing the signal. A significant reduction in the power penalty is observed using DWT. Comparative study of DWT based denoising scheme with that of the high pass filter (HPF) show that DWT not only can match the best performance obtain using a HPF, but also offers a reduced complexity and design simplicity. The high power penalty due to multipath induced ISI makes a diffuse optical link practically infeasible at higher data rates. An ANN based linear and DF architectures are investigated to compensation the ISI. Unlike the unequalized cases, the equalized schemes don‘t show infinite power penalty and a significant performance improvement is observed for all modulation schemes. The comparative studies substantiate that ANN based equalizers match the performance of the traditional equalizers for all channel conditions with a reduced training data sequence. The study of the combined effect of the FLI and ISI shows that DWT-ANN based receiver perform equally well in the present of both interference. Adaptive decoding of error control code can offer flexibility of selecting the best possible encoder in a given environment. A suboptimal 'soft' sliding block convolutional decoder based on the ANN and a 1/2 rate convolutional code with a constraint length is investigated. Results show that the ANN decoder can match the performance of optimal Viterbi decoder for hard decision decoding but with slightly inferior performance compared to soft decision decoding. This provides a foundation for further investigation of the ANN decoder for convolutional code with higher constraint length values. Finally, the proposed DWT-ANN receiver is practically realized in digital signal processing (DSP) board. The output from the DSP board is compared with the computer simulations and found that the difference is marginal. However, the difference in results doesn‘t affect the overall error probability and identical error probability is obtained for DSP output and computer simulations.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Desarrollo y validación de un modelo dinámico para una pila de combustible tipo PEM

JORNADAS DE AUTOMÁTICA (27) (27.2006.ALMERÍA)El objetivo de este trabajo es realizar un modelo dinámico detallado de una pila de combustible tipo PEM de 1.2 kW de potencia nominal. El modelo desarrollado incluye efectos como el ’flooding’ y la dinámica de la temperatura y es de utilidad para poder diseñar y ensayar controles tanto de la válvula de purga como de la refrigeración de la pila mediante un ventilador. Se ha desarrollado un novedoso tratamiento de la ecuación experimental que modela la curva de polarización que simplifica considerablemente su caracterización. Por último el modelo realizado ha sido validado con datos tomados de una pila real