229,739 research outputs found
Model-based controller design for a plastic film extrusion process
This paper reports the development and implementation of a model-based cross-directional controller for plastic film extrusion and other web-forming processes. The controller design has a similar structure to that of internal model control (IMC) with the addition of an observer whose gain is designed to minimise process and model mis-match. The observer gain is obtained by solving a multi-objective optimisation through the application of a genetic algorithm and simulation results are presented in this paper demonstrating improvements that can be achieved by the proposed controller over two existing CD controllers
Improving the Accuracy and Scope of Control-Oriented Vapor Compression Cycle System Models
The benefits of applying advanced control techniques to vapor compression cycle systems are well know.
The main advantages are improved performance and efficiency, the achievement of which brings both economic and
environmental gains. One of the most significant hurdles to the practical application of advanced control techniques
is the development of a dynamic system level model that is both accurate and mathematically tractable. Previous
efforts in control-oriented modeling have produced a class of heat exchanger models known as moving-boundary
models. When combined with mass flow device models, these moving-boundary models provide an excellent
framework for both dynamic analysis and control design. This thesis contains the results of research carried out to
increase both the accuracy and scope of these system level models.
The improvements to the existing vapor compression cycle models are carried out through the application
of various modeling techniques, some static and some dynamic, some data-based and some physics-based. Semiempirical
static modeling techniques are used to increase the accuracy of both heat exchangers and mass flow
devices over a wide range of operating conditions. Dynamic modeling techniques are used both to derive new
component models that are essential to the simulation of very common vapor compression cycle systems and to
improve the accuracy of the existing compressor model. A new heat exchanger model that accounts for the effects
of moisture in the air is presented. All of these model improvements and additions are unified to create a simple but
accurate system level model with a wide range of application. Extensive model validation results are presented,
providing both qualitative and quantitative evaluation of the new models and model improvements.Air Conditioning and Refrigeration Project 17
Sparse Identification and Estimation of Large-Scale Vector AutoRegressive Moving Averages
The Vector AutoRegressive Moving Average (VARMA) model is fundamental to the
theory of multivariate time series; however, in practice, identifiability
issues have led many authors to abandon VARMA modeling in favor of the simpler
Vector AutoRegressive (VAR) model. Such a practice is unfortunate since even
very simple VARMA models can have quite complicated VAR representations. We
narrow this gap with a new optimization-based approach to VARMA identification
that is built upon the principle of parsimony. Among all equivalent
data-generating models, we seek the parameterization that is "simplest" in a
certain sense. A user-specified strongly convex penalty is used to measure
model simplicity, and that same penalty is then used to define an estimator
that can be efficiently computed. We show that our estimator converges to a
parsimonious element in the set of all equivalent data-generating models, in a
double asymptotic regime where the number of component time series is allowed
to grow with sample size. Further, we derive non-asymptotic upper bounds on the
estimation error of our method relative to our specially identified target.
Novel theoretical machinery includes non-asymptotic analysis of infinite-order
VAR, elastic net estimation under a singular covariance structure of
regressors, and new concentration inequalities for quadratic forms of random
variables from Gaussian time series. We illustrate the competitive performance
of our methods in simulation and several application domains, including
macro-economic forecasting, demand forecasting, and volatility forecasting
Online Localization and Tracking of Multiple Moving Speakers in Reverberant Environments
We address the problem of online localization and tracking of multiple moving
speakers in reverberant environments. The paper has the following
contributions. We use the direct-path relative transfer function (DP-RTF), an
inter-channel feature that encodes acoustic information robust against
reverberation, and we propose an online algorithm well suited for estimating
DP-RTFs associated with moving audio sources. Another crucial ingredient of the
proposed method is its ability to properly assign DP-RTFs to audio-source
directions. Towards this goal, we adopt a maximum-likelihood formulation and we
propose to use an exponentiated gradient (EG) to efficiently update
source-direction estimates starting from their currently available values. The
problem of multiple speaker tracking is computationally intractable because the
number of possible associations between observed source directions and physical
speakers grows exponentially with time. We adopt a Bayesian framework and we
propose a variational approximation of the posterior filtering distribution
associated with multiple speaker tracking, as well as an efficient variational
expectation-maximization (VEM) solver. The proposed online localization and
tracking method is thoroughly evaluated using two datasets that contain
recordings performed in real environments.Comment: IEEE Journal of Selected Topics in Signal Processing, 201
Toward improved identifiability of hydrologic model parameters: The information content of experimental data
We have developed a sequential optimization methodology, entitled the parameter identification method based on the localization of information (PIMLI) that increases information retrieval from the data by inferring the location and type of measurements that are most informative for the model parameters. The PIMLI approach merges the strengths of the generalized sensitivity analysis (GSA) method [Spear and Hornberger, 1980], the Bayesian recursive estimation (BARE) algorithm [Thiemann et al., 2001], and the Metropolis algorithm [Metropolis et al., 1953]. Three case studies with increasing complexity are used to illustrate the usefulness and applicability of the PIMLI methodology. The first two case studies consider the identification of soil hydraulic parameters using soil water retention data and a transient multistep outflow experiment (MSO), whereas the third study involves the calibration of a conceptual rainfall-runoff model
Optimal coverage multi-path scheduling scheme with multiple mobile sinks for WSNs
Wireless Sensor Networks (WSNs) are usually formed with many tiny sensors which are randomly deployed within sensing field for target monitoring. These sensors can transmit their monitored data to the sink in a multi-hop communication manner. However, the ‘hot spots’ problem will be caused since nodes near sink will consume more energy during forwarding. Recently, mobile sink based technology provides an alternative solution for the long-distance communication and sensor nodes only need to use single hop communication to the mobile sink during data transmission. Even though it is difficult to consider many network metrics such as sensor position, residual energy and coverage rate etc., it is still very important to schedule a reasonable moving trajectory for the mobile sink. In this paper, a novel trajectory scheduling method based on coverage rate for multiple mobile sinks (TSCR-M) is presented especially for large-scale WSNs. An improved particle swarm optimization (PSO) combined with mutation operator is introduced to search the parking positions with optimal coverage rate. Then the genetic algorithm (GA) is adopted to schedule the moving trajectory for multiple mobile sinks. Extensive simulations are performed to validate the performance of our proposed method
Segmentation-assisted detection of dirt impairments in archived film sequences
A novel segmentation-assisted method for film dirt detection is proposed. We exploit the fact that film dirt manifests in the spatial domain as a cluster of connected pixels whose intensity differs substantially from that of its neighborhood and we employ a segmentation-based approach to identify this type of structure. A key feature of our approach is the computation of a measure of confidence attached to detected dirt regions which can be utilized for performance fine tuning. Another important feature of our algorithm is the avoidance of the computational complexity associated with motion estimation. Our experimental framework benefits from the availability of manually derived as well as objective ground truth data obtained using infrared scanning. Our results demonstrate that the proposed method compares favorably with standard spatial, temporal and multistage median filtering approaches and provides efficient and robust detection for a wide variety of test material
- …