Latency Optimized Asynchronous Early Output Ripple Carry Adder based on Delay-Insensitive Dual-Rail Data Encoding

Asynchronous circuits employing delay-insensitive codes for data representation i.e. encoding and following a 4-phase return-to-zero protocol for handshaking are generally robust. Depending upon whether a single delay-insensitive code or multiple delay-insensitive code(s) are used for data encoding, the encoding scheme is called homogeneous or heterogeneous delay-insensitive data encoding. This article proposes a new latency optimized early output asynchronous ripple carry adder (RCA) that utilizes single-bit asynchronous full adders (SAFAs) and dual-bit asynchronous full adders (DAFAs) which incorporate redundant logic and are based on the delay-insensitive dual-rail code i.e. homogeneous data encoding, and follow a 4-phase return-to-zero handshaking. Amongst various RCA, carry lookahead adder (CLA), and carry select adder (CSLA) designs, which are based on homogeneous or heterogeneous delay-insensitive data encodings which correspond to the weak-indication or the early output timing model, the proposed early output asynchronous RCA that incorporates SAFAs and DAFAs with redundant logic is found to result in reduced latency for a dual-operand addition operation. In particular, for a 32-bit asynchronous RCA, utilizing 15 stages of DAFAs and 2 stages of SAFAs leads to reduced latency. The theoretical worst-case latencies of the different asynchronous adders were calculated by taking into account the typical gate delays of a 32/28nm CMOS digital cell library, and a comparison is made with their practical worst-case latencies estimated. The theoretical and practical worst-case latencies show a close correlation....Comment: arXiv admin note: text overlap with arXiv:1704.0761

Architecting NP-Dynamic Skybridge

With the scaling of technology nodes, modern CMOS integrated circuits face severe fundamental challenges that stem from device scaling limitations, interconnection bottlenecks and increasing manufacturing complexities. These challenges drive researchers to look for revolutionary technologies beyond the end of CMOS roadmap. Towards this end, a new nanoscale 3-D computing fabric for future integrated circuits, Skybridge, has been proposed [1]. In this new fabric, core aspects from device to circuit style, connectivity, thermal management and manufacturing pathway are co-architected in a 3-D fabric-centric manner. However, the Skybridge fabric uses only n-type transistors in a dynamic circuit style for logic and memory implementations. Therefore, it requires complicated clocking schemes to overcome signal monotonicity associated with cascading dynamic logic gates. For Skybridge’s large-scale circuits, the dynamic circuit style requires cascaded stages to be micro-pipelined, which results in large number of buffers used for storing minterms causing significant overhead in terms of area and power. Moreover, implementation of logic is limited to NAND or AND-of-NAND based logic expressions, which does not always result in compact circuits. In this work, we propose an extension of original Skybridge fabric, called NP-Dynamic-Skybridge, to solve these challenges by using both n-and p-type transistors in an innovative circuit style. Here, every stage in a given circuit is implemented by either n-type or p-type dynamic logic. Cascading n- and p-type dynamic logic effectively avoids signal monotonicity problem, and allows combinational-like circuit implementation. This helps to simplify the clocking scheme for cascaded logics requiring only one set of global precharge and evaluate clock signals. And also it expands the degree of expressing logic enabling expressions such as NOR, OR-of-NORs, in addition to those previously mentioned. Furthermore, the number of pipeline stages is significantly reduced for a given logic function, and buffer requirements are less compared with Skybridge 3D fabric thus improving on area and power metrics. Initial evaluation for NP-Dynamic-Skybridge’s 4-bit carry look-ahead adder shows up to 2x density benefits over Skybridge 3-D fabric and at least 17% power/throughput benefit

On the Implementation of Efficient Channel Filters for Wideband Receivers by Optimizing Common Subexpression Elimination Methods

No abstract availabl

Enhanced distance-based location management of mobile communication systems using a cell coordinates approach

In managing the locations of mobile users in mobile communication systems, the distance-based strategy has been proven to have better performance than other dynamic strategies, but is difficult to implement. In this paper, a simple approach is introduced to implement the distance-based strategy by using the cell coordinates in calculating the physical distance traveled. This approach has the advantages of being independent of the size, shape, and distribution of cells, as well as catering for the direction of movement in addition to the speed of each mobile terminal. An enhanced distance-based location management strategy is proposed to dynamically adjust the size and shape of location area for each individual mobile terminal according to the current speed and direction of movement. It can reduce the location management signaling traffic of the distance-based strategy by half when mobile terminals have predictable directions of movement. Three types of location updating schemes are discussed, namely, Circular Location Area, Optimal Location Area, and Elliptic Location Area. Paging schemes using searching techniques such as expanding distance search based on the last reported location and based on the predicted location, and expanding direction search are also explored to further reduce paging signal traffic by partitioning location areas into paging areas.published_or_final_versio

Low-Power, Low-Cost, & High-Performance Digital Designs : Multi-bit Signed Multiplier design using 32nm CMOS Technology

Binary multipliers are ubiquitous in digital hardware. Digital multipliers along with the adders play a major role in computing, communicating, and controlling devices. Multipliers are used majorly in the areas of digital signal and image processing, central processing unit (CPU) of the computers, high-performance and parallel scientific computing, machine learning, physical layer design of the communication equipment, etc. The predominant presence and increasing demand for low-power, low-cost, and high-performance digital hardware led to this work of developing optimized multiplier designs. Two optimized designs are proposed in this work. One is an optimized 8 x 8 Booth multiplier architecture which is implemented using 32nm CMOS technology. Synthesis (pre-layout) and post-layout results show that the delay is reduced by 24.7% and 25.6% respectively, the area is reduced by 5.5% and 15% respectively, the power consumption is reduced by 21.5% and 26.6% respectively, and the area-delay-product is reduced by 28.8% and 36.8% respectively when compared to the performance results obtained for the state-of-the-art 8 x 8 Booth multiplier designed using 32nm CMOS technology with 1.05 V supply voltage at 500 MHz input frequency. Another is a novel radix-8 structure with 3-bit grouping to reduce the number of partial products along with the effective partial product reduction schemes for 8 x 8, 16 x 16, 32 x 32, and 64 x 64 signed multipliers. Comparing the performance results of the (synthesized, post-layout) designs of sizes 32 x 32, and 64 x 64 based on the simple novel radix-8 structure with the estimated performance measurements for the optimized Booth multiplier design presented in this work, reduction in delay by (2.64%, 0.47%) and (2.74%, 18.04%) respectively, and reduction in area-delay-product by (12.12%, -5.17%) and (17.82%, 12.91%) respectively can be observed. With the use of the higher radix structure, delay, area, and power consumption can be further reduced. Appropriate adder deployment, further exploring the optimized grouping or compression strategies, and applying more low-power design techniques such as power-gating, multi-Vt MOS transistor utilization, multi-VDD domain creation, etc., help, along with the higher radix structures, realizing the more efficient multiplier designs