105 research outputs found

    Experimenting with commodity 802.11 hardware: overview and future directions

    Get PDF
    The huge adoption of 802.11 technologies has triggered a vast amount of experimentally-driven research works. These works range from performance analysis to protocol enhancements, including the proposal of novel applications and services. Due to the affordability of the technology, this experimental research is typically based on commercial off-the-shelf (COTS) devices, and, given the rate at which 802.11 releases new standards (which are adopted into new, affordable devices), the field is likely to continue to produce results. In this paper, we review and categorise the most prevalent works carried out with 802.11 COTS devices over the past 15 years, to present a timely snapshot of the areas that have attracted the most attention so far, through a taxonomy that distinguishes between performance studies, enhancements, services, and methodology. In this way, we provide a quick overview of the results achieved by the research community that enables prospective authors to identify potential areas of new research, some of which are discussed after the presentation of the survey.This work has been partly supported by the European Community through the CROWD project (FP7-ICT-318115) and by the Madrid Regional Government through the TIGRE5-CM program (S2013/ICE-2919).Publicad

    Efficient real-time video delivery in vehicular networks

    Full text link
    Tesis por compendio[EN] Vehicular Ad-hoc Networks (VANET) are a special type of networks where the nodes involved in the communication are vehicles. VANETs are created when several vehicles connect among themselves without the use of any infrastructure. In certain situations the absence of infrastructure is an advantage, but it also creates several challenges that should be overcome. One of the main problems related with the absence of infrastructure is the lack of a coordinator that can ensure a certain level of quality in order to enable the correct transmission of video and audio. Video transmission can be extremely useful in this type of networks as it can be used for videoconferencing of by traffic authorities to monitor the scene of an accident. In this thesis we focused on real time video transmission, providing solutions for both unicast and multicast environments. Specifically, we built a real-world testbed scenario and made a comparison with simulation results to validate the behavior of the simulation models. Using that testbed we implemented and improved DACME, an admission control module able to provide Quality of Service (QoS) to unicast video transmissions. DACME proved to be a valid solution to obtain a certain level of QoS in multi-hop environments. Concerning multicast video transmission, we developed and simulated several flooding schemes, focusing specifically on VANET environments. In this scope, the main contribution of this thesis is the Automatic Copies Distance Based (ACDB) flooding scheme. Thanks to the use of the perceived vehicular density, ACDB is a zeroconf scheme able to achieve good video quality in both urban and highway environments, being specially effective in highway environments.[ES] Las redes vehiculares ad-hoc (VANET) son un tipo especial de redes en las que los nodos que participan de la comunicación son vehículos. Las VANETs se crean cuando diversos vehículos se conectan entre ellos sin el uso de ninguna infraestructura. En determinadas situaciones, la ausencia de infraestructura es una ventaja, pero también crea una gran cantidad de desafíos que se deben superar. Uno de los principales problemas relacionados con la ausencia de infraestructura, es la ausencia de un coordinador que pueda asegurar un determinado nivel de calidad, para poder asegurar la correcta transmisión de audio y vídeo. La transmisión de vídeo puede ser de extrema utilidad en este tipo de redes ya que puede ser empleada para videoconferencias o por las autoridades de tráfico para monitorizar el estado de un accidente. En esta tesis nos centramos en la transmisión de vídeo en tiempo real, proveyendo soluciones tanto para entornos unicast como multicast. En particular construimos un banco de pruebas real y comparamos los resultados obtenidos con resultados obtenidos en un entorno simulado para comprobar la fiabilidad de estos modelos. Usando el mismo banco de pruebas, implementamos y mejoramos DACME, un módulo de control de admisión capaz de proveer de calidad de servicio a transmisiones de vídeo unicast. DACME probó ser una solución válida para obtener ciertos niveles de calidad de servicio en entornos multisalto. En lo referente a la transmisión de vídeo multicast, desarrollamos y simulamos diversos esquemas de difusión diseñados específicamente para entornos VANET. En este campo, la principal contribución de esta tesis es el esquema de difusión "Automatic Copies Distance Based" (ACDB). Gracias al uso de la densidad vehicular percibida, ACDB es un esquema, que sin necesidad de configuración, permite alcanzar una buena calidad de vídeo tanto en entornos urbanos como en autopistas, siendo especialmente efectivo en este último entorno.[CA] Les xarxes vehiculars ad-hoc (VANET) son un tipus de xarxes especials a les que els diferents nodes que formen part d'una comunicació son vehicles. Les VANETs es formen quan diversos vehicles es connecten sense fer ús de cap infraestructura. A certes situacions l'absència d'una infraestructura suposa un avantatge, encara que també genera una gran quantitat de desafiaments que s'han de superar. U dels principals problemes relacionats amb l'absència d'infraestructura, és la manca d'un coordinador que puga garantir una correcta transmissió tant de video com d'àudio. La transmissió de video pot ser d'extrema utilitat a aquest tipus de xarxes, ja que es por emprar tant per a videoconferències com per part de les autoritats de trànsit per monitoritzar l'estat d'un accident. A aquesta tesi ens centrem en transmissió de video en temps real, proporcionant solucions tant a entorns unicast como a entorns multicast. Particularment, vam construir un banc de proves i obtinguérem resultats que comparàrem amb resultats obtinguts mitjançant simulació. D'aquesta manera validarem la fiabilitat dels resultats simulats. Fent ús del mateix banc de proves, vàrem implementar i millorar DACME, un mòdul de control d'admissió, capaç de proveir de qualitat de servici a transmissions de video unicast. DACME va provar ser una bona solució per obtindré un bon nivell de qualitat de servici en entorns de xarxes ad-hoc amb diversos salts. Si ens centrem a la transmissió de video multicast, vàrem implementar i simular diferents esquemes de difusió, específicament dissenyats per al seu ús a entorns VANET. La principal contribució d'aquesta tesi es l'esquema de difusió ACDB (Automatic Copies Distance Based). Fent ús de la densitat vehicular, ACDB es capaç d'obtindre una bona qualitat de video tant a ciutats com a vies interurbanes, sent a especialment efectiu a aquestes últimes. A més a més no es necessària cap configuració per part de l'usuari.Torres Cortés, Á. (2016). Efficient real-time video delivery in vehicular networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/62685TESISCompendi

    Multi-layer traffic control for wireless networks

    Get PDF
    Le reti Wireless LAN, così come definite dallo standard IEEE 802.11, garantiscono connettività senza fili nei cosiddetti “hot-spot” (aeroporti, hotel, etc.), nei campus universitari, nelle intranet aziendali e nelle abitazioni. In tali scenari, le WLAN sono denotate come “ad infrastruttura” nel senso che la copertura della rete è basata sulla presenza di un “Access Point” che fornisce alle stazioni mobili l’accesso alla rete cablata. Esiste un ulteriore approccio (chiamato “ad-hoc”) in cui le stazioni mobili appartenenti alla WLAN comunicano tra di loro senza l’ausilio dell’Access Point. Le Wireless LAN tipicamente sono connesse alla rete di trasporto (che essa sia Internet o una Intranet aziendale) usando un’infrastruttura cablata. Le reti wireless Mesh ad infrastruttura (WIMN) rappresentano un’alternativa valida e meno costosa alla classica infrastruttura cablata. A testimonianza di quanto appena affermato vi è la comparsa e la crescita sul mercato di diverse aziende specializzate nella fornitura di infrastrutture di trasporto wireless e il lancio di varie attività di standardizzazione (tra cui spicca il gruppo 802.11s). La facilità di utilizzo, di messa in opera di una rete wireless e i costi veramente ridotti hanno rappresentato fattori critici per lo straordinario successo di tale tecnologia. Di conseguenza possiamo affermare che la tecnologia wireless ha modificato lo stile di vita degli utenti, il modo di lavorare, il modo di passare il tempo libero (video conferenze, scambio foto, condivisione di brani musicali, giochi in rete, messaggistica istantanea ecc.). D’altro canto, lo sforzo per garantire lo sviluppo di reti capaci di supportare servizi dati ubiqui a velocità di trasferimento elevate è strettamente legato a numerose sfide tecniche tra cui: il supporto per l’handover tra differenti tecnologie (WLAN/3G), la certezza di accesso e autenticazione sicure, la fatturazione e l’accounting unificati, la garanzia di QoS ecc. L’attività di ricerca svolta nell’arco del Dottorato si è focalizzata sulla definizione di meccanismi multi-layer per il controllo del traffico in reti wireless. In particolare, nuove soluzioni di controllo del traffico sono state realizzate a differenti livelli della pila protocollare (dallo strato data-link allo strato applicativo) in modo da fornire: funzionalità avanzate (autenticazione sicura, differenziazione di servizio, handover trasparente) e livelli soddisfacenti di Qualità del Servizio. La maggior parte delle soluzioni proposte in questo lavoro di tesi sono state implementate in test-bed reali. Questo lavoro riporta i risultati della mia attività di ricerca ed è organizzato nel seguente modo: ogni capitolo presenta, ad uno specifico strato della pila protocollare, un meccanismo di controllo del traffico con l’obiettivo di risolvere le problematiche presentate precedentemente. I Capitoli 1 e 2 fanno riferimento allo strato di Trasporto ed investigano il problema del mantenimento della fairness per le connessioni TCP. L’unfairness TCP conduce ad una significativa degradazione delle performance implicando livelli non soddisfacenti di QoS. Questi capitoli descrivono l’attività di ricerca in cui ho impiegato il maggior impegno durante gli studi del dottorato. Nel capitolo 1 viene presentato uno studio simulativo delle problematiche di unfairness TCP e vengono introdotti due possibili soluzioni basate su rate-control. Nel Capitolo 2 viene derivato un modello analitico per la fairness TCP e si propone uno strumento per la personalizzazione delle politiche di fairness. Il capitolo 3 si focalizza sullo strato Applicativo e riporta diverse soluzioni di controllo del traffico in grado di garantire autenticazione sicura in scenari di roaming tra provider wireless. Queste soluzioni rappresentano parte integrante del framework UniWireless, un testbed nazionale sviluppato nell’ambito del progetto TWELVE. Il capitolo 4 descrive, nuovamente a strato Applicativo, una soluzione (basata su SIP) per la gestione della mobilità degli utenti in scenari di rete eterogenei ovvero quando diverse tecnologie di accesso radio sono presenti (802.11/WiFi, Bluetooth, 2.5G/3G). Infine il Capitolo 5 fa riferimento allo strato Data-Link presentando uno studio preliminare di un approccio per il routing e il load-balancing in reti Mesh infrastrutturate.Wireless LANs, as they have been defined by the IEEE 802.11 standard, are shared media enabling connectivity in the so-called “hot-spots” (airports, hotel lounges, etc.), university campuses, enterprise intranets, as well as “in-home” for home internet access. With reference to the above scenarios, WLANs are commonly denoted as “infra-structured” in the sense that WLAN coverage is based on “Access Points” which provide the mobile stations with access to the wired network. In addition to this approach, there exists also an “ad-hoc” mode to organize WLANs where mobile stations talk to each other without the need of Access Points. Wireless LANs are typically connected to the wired backbones (Internet or corporate intranets) using a wired infrastructure. Wireless Infrastructure Mesh Networks (WIMN) may represent a viable and cost-effective alternative to this traditional wired approach. This is witnessed by the emergence and growth of many companies specialized in the provisioning of wireless infrastructure solutions, as well as the launch of standardization activities (such as 802.11s). The easiness of deploying and using a wireless network, and the low deployment costs have been critical factors in the extraordinary success of such technology. As a logical consequence, the wireless technology has allowed end users being connected everywhere – every time and it has changed several things in people’s lifestyle, such as the way people work, or how they live their leisure time (videoconferencing, instant photo or music sharing, network gaming, etc.). On the other side, the effort to develop networks capable of supporting ubiquitous data services with very high data rates in strategic locations is linked with many technical challenges including seamless vertical handovers across WLAN and 3G radio technologies, security, 3G-based authentication, unified accounting and billing, consistent QoS and service provisioning, etc. My PhD research activity have been focused on multi-layer traffic control for Wireless LANs. In particular, specific new traffic control solutions have been designed at different layers of the protocol stack (from the link layer to the application layer) in order to guarantee i) advanced features (secure authentication, service differentiation, seamless handover) and ii) satisfactory level of perceived QoS. Most of the proposed solutions have been also implemented in real testbeds. This dissertation presents the results of my research activity and is organized as follows: each Chapter presents, at a specific layer of the protocol stack, a traffic control mechanism in order to address the introduced above issues. Chapter 1 and Charter 2 refer to the Transport Layer, and they investigate the problem of maintaining fairness for TCP connections. TCP unfairness may result in significant degradation of performance leading to users perceiving unsatisfactory Quality of Service. These Chapters describe the research activity in which I spent the most significant effort. Chapter 1 proposes a simulative study of the TCP fairness issues and two different solutions based on Rate Control mechanism. Chapter 2 illustrates an analytical model of the TCP fairness and derives a framework allowing wireless network providers to customize fairness policies. Chapter 3 focuses on the Application Layer and it presents new traffic control solutions able to guarantee secure authentication in wireless inter-provider roaming scenarios. These solutions are an integral part of the UniWireless framework, a nationwide distributed Open Access testbed that has been jointly realized by different research units within the TWELVE national project. Chapter 4 describes again an Application Layer solution, based on Session Initiation Protocol to manage user mobility and provide seamless mobile multimedia services in a heterogeneous scenario where different radio access technologies are used (802.11/WiFi, Bluetooth, 2.5G/3G networks). Finally Chapter 5 refers to the Data Link Layer and presents a preliminary study of a general approach for routing and load balancing in Wireless Infrastructure Mesh Network. The key idea is to dynamically select routes among a set of slowly changing alternative network paths, where paths are created through the reuse of classical 802.1Q multiple spanning tree mechanisms

    A heterogeneous peer-to-peer network testbed

    Get PDF
    In this paper, we describe a heterogeneous peer-to-peer network testbed, which is developed as part of a joint research project to investigate novel resource discovery and content distribution protocols in a heterogeneous wired/wireless environment. We describe the testbed requirements, the testbed architecture, the multi-functional wireless node, and the software architecture. We also describe some of the proposed protocols to be developed and tested on the testbed. © 2009 IEEE.published_or_final_versionThe 1st International Conference on Ubiquitous and Future Networks (ICUFN 2009), Hong Kong, 7-9 June 2009. In Proceedings of the 1st ICUFN, 2009, p. 46-5

    Experimental analysis of WiMAX and meshed Wi-Fi quality of service

    Get PDF
    Mestrado em Engenharia Electrónica e TelecomunicaçõesA indústria das telecomunicações tem sofrido uma evolução enorme nosúltimos anos. Tanto em termos de comunicações sem fios, como em termos deligações de banda larga, assistiu-se a uma adesão massiva por parte domercado, o que se traduziu num crescimento enorme, já que a tecnologia temque estar um passo à frente da procura, de forma a suprir as carências dosconsumidores. Assim, a evolução persegue um objectivo claro: possibilidadede possuir conectividade de banda larga em qualquer lugar e instante. Nestecontexto, aparecem as tecnologias WiMAX (Worldwide Interoperability forMicrowave Access) e WI-FI em Malha como possibilidades para atingir estefim. O tema desta dissertação incide no estudo das tecnologias de WiMAX e WI-FIem Malha, mais concretamente no estudo da Qualidade de Serviço (QoS)providenciada pelas normas IEEE 802.16 e IEEE 802.11s para serviços deVoIP e VoD. Esta tese apresenta a arquitectura desenvolvida para a correcta integração deQoS para serviços em tempo real no acesso à banda larga sem fios depróxima geração. De seguida, apresenta testes efectuados com osequipamentos disponíveis de WiMAX e WI-FI em Malha, de forma a mostrar ocorrecto comportamento da atribuição extremo-a-extremo de QoS nos cenáriosescolhidos com serviços em tempo real, bem como os efeitos da mobilidade natecnologia WI-FI em Malha. ABSTRACT: The telecommunication industry has suffered a massive evolution throughoutpast years. In terms of wireless communications, as well as broadbandconnections, we’ve seen a massive adoption by the market, which conductedinto an enormous growth, since the technology must always be one step aheadof the demand, in order to be to fulfill the needs of the consumers. Therefore,the evolution pursues one clear goal: the possibility to establish a broadbandconnection anywhere and anytime. In this context, the WiMAX (WorldwideInteroperability for Microwave Access) and Meshed WI-FI technologies appearas possibilities to reach this goal. The subject of this thesis is the study of both the WiMAX and Meshed WI-FItechnologies, and more concretely the study of the QoS provided by theIEEE802.16 and IEEE 802.11s standards to VoIP and VoD services. This thesis presents the architecture developed to provide the correctintegration of QoS for real-media traffic in next generation broadband wirelessaccess. It presents tests carried out with the available WiMAX and Meshed WI-FI equipments, to show the correct behavior in the attribution of end-to-endQoS in selected scenarios with real-time services, as well as mobility effects onWI-FI Wireless Mesh technology

    Mitigating the Impact of Physical Layer Capture and ACK Interference in Wireless 802.11 Networks

    Get PDF
    Ph.DDOCTOR OF PHILOSOPH
    corecore