Implementing ARP-Path Low Latency Bridges in NetFPGA

The demo is focused on the implementation of ARP-Path (a.k.a. FastPath) bridges, a recently proposed concept for low latency bridges. ARP-Path Bridges rely on the race between broadcast ARP Request packets, to discover the minimum latency path to the destination host. Several implementations (in Omnet++, Linux, OpenFlow, NetFPGA) have shown that ARP-Path exhibits loop-freedom, does not block links, is fully transparent to hosts and neither needs a spanning tree protocol to prevent loops nor a link state protocol to obtain low latency paths. This demo compares our hardware implementation on NetFPGA to bridges running STP, showing that ARP-Path finds lower latency paths than STP

Implementing ARP-Path Low Latency Bridges in NetFPGA

The demo is focused on the implementation of ARP-Path (a.k.a. FastPath) bridges, a recently proposed concept for low latency bridges. ARP-Path Bridges rely on the race between broadcast ARP Request packets, to discover the minimum latency path to the destination host. Several implementations (in Omnet++, Linux, OpenFlow, NetFPGA) have shown that ARP-Path exhibits loop-freedom, does not block links, is fully transparent to hosts and neither needs a spanning tree protocol to prevent loops nor a link state protocol to obtain low latency paths. This demo compares our hardware implementation on NetFPGA to bridges running STP, showing that ARP-Path finds lower latency paths than STP.Comunidad de MadridJunta de Comunidades de Castilla-La Manch

All-path bridging: Path exploration as an efficient alternative to path computation in bridging standards

This work is at: IEEE International Conference on Communications: Second Workshop on Telecommunication Standards: From Research to Standards. In Communications Workshops (ICC). Date 9-13 June 2013, Budapest, Hungary.Link-state based routing protocols are dominant in Shortest Path Bridges (IEEE 802.1aq) and also at TRILL (IETF) Rbridges. Both standards propose a hybrid of switch and router adding a link state routing protocol in layer two that computes shortest paths between bridges. Surprisingly, path exploration mechanisms have not yet been considered at standardization bodies, in spite of some outstanding advantages: simplicity,instantaneous path adaptation to traffic load with load adaptive routing and low latency. We have developed All-path, a family of protocols based on simple path exploration mechanisms based on full flooding of a single frame, as an alternative to the "beatentrail" of path computation. Path exploration (either instantaneous or periodical, proactive or reactive) is an efficient alternative to path computation for bridged networks because the processing cost of address learning at bridges from broad cast frames is very low and Ethernet links provide very high link capacity so that the extra packet broad casts do not impact load significantly. Standardization groups should consider the application of path exploration (instantaneous or periodical, proactive or reactive) mechanisms in Audio Video Bridges and ingeneric bridging networks like campus and data centers to find redundant paths, low latency and load distributionThis work was supported in part by grants from Comunidad de Madrid through Project MEDIANET-CM (S-2009/TIC-1468) .Publicad

Evaluating Native Load Distribution of ARP- Path Bridging Protocol in Mesh and Data Center

RP-Path is a simple, low latency, shortest path bridging protocol for campus, enterprise and data center networks. We recently found that this protocol natively distributes the traffic load in networks having redundant paths of similar characteristics. The reason is that every new path between hosts is selected on-demand in a race among ARP Request packet replicas over all available paths: the first arriving replica gets its path selected on the fly. This means a continuous adaptation of new paths to variations on the load at links and bridges. To show this unique load distribution capability and path diversity property we use a number of simulations for complex scenarios, including two different simulators: one flow- based and one packet-based, and two basic topologies: data center and a regular mesh. We also verify this behavior on real hardware on a network of nine ARP-Path NetFPGA switches. The conclusion is that the ARP-Path protocol efficiently distributes traffic via alternative paths at all load levels, provided that multiple paths of similar propagation delays are availableComunidad de Madri

All-Path Bridging: Path Exploration Protocols for Data Center and Campus Networks

Today, link-state routing protocols that compute multiple shortest paths predominate in data center and campus networks, where routing is performed either in layer three or in layer two using link-state routing protocols. But current proposals based on link-state routing do not adapt well to real time traffic variations and become very complex when attempting to balance the traffic load. We propose All-Path bridging, an evolution of the classical transparent bridging that forwards frames over shortest paths using the complete network topology, which overcomes the limitations of the spanning tree protocol. All-Path is a new frame routing paradigm based on the simultaneous exploration of all paths of the real network by a broadcast probe frame, instead of computing routes on the network graph. This paper presents All- Path switches and their differences with standard switches and describes ARP-Path protocol in detail, its path recovery mechanisms and compatibility with IEEE 802.1 standard bridges. ARP-Path is the first protocol variant of the All-Path protocol family. ARP-Path reuses the standard ARP Request and Reply packets to explore reactively the network and find the fastest path between two hosts. We compare its performance in terms of latency and load distribution with link-state shortest-path routing bridges, showing that ARP-Path distributes the load more evenly and provides lower latencies. Implementations on different platforms prove the robustness of the protocol. The conclusion is that All-Path bridging offer a simple, resilient and scalable alternative to path computation protocols

All-Path Bridging: Path Exploration Protocols for Data Center and Campus Networks

Today, link-state routing protocols that compute multiple shortest paths predominate in data center and campus networks, where routing is performed either in layer three or in layer two using link-state routing protocols. But current proposals based on link-state routing do not adapt well to real time traffic variations and become very complex when attempting to balance the traffic load. We propose All-Path bridging, an evolution of the classical transparent bridging that forwards frames over shortest paths using the complete network topology, which overcomes the limitations of the spanning tree protocol. All-Path is a new frame routing paradigm based on the simultaneous exploration of all paths of the real network by a broadcast probe frame, instead of computing routes on the network graph. This paper presents All- Path switches and their differences with standard switches and describes ARP-Path protocol in detail, its path recovery mechanisms and compatibility with IEEE 802.1 standard bridges. ARP-Path is the first protocol variant of the All-Path protocol family. ARP-Path reuses the standard ARP Request and Reply packets to explore reactively the network and find the fastest path between two hosts. We compare its performance in terms of latency and load distribution with link-state shortest-path routing bridges, showing that ARP-Path distributes the load more evenly and provides lower latencies. Implementations on different platforms prove the robustness of the protocol. The conclusion is that All-Path bridging offer a simple, resilient and scalable alternative to path computation protocols