Enabling Technologies for Ultra-Reliable and Low Latency Communications: From PHY and MAC Layer Perspectives

© 1998-2012 IEEE. Future 5th generation networks are expected to enable three key services-enhanced mobile broadband, massive machine type communications and ultra-reliable and low latency communications (URLLC). As per the 3rd generation partnership project URLLC requirements, it is expected that the reliability of one transmission of a 32 byte packet will be at least 99.999% and the latency will be at most 1 ms. This unprecedented level of reliability and latency will yield various new applications, such as smart grids, industrial automation and intelligent transport systems. In this survey we present potential future URLLC applications, and summarize the corresponding reliability and latency requirements. We provide a comprehensive discussion on physical (PHY) and medium access control (MAC) layer techniques that enable URLLC, addressing both licensed and unlicensed bands. This paper evaluates the relevant PHY and MAC techniques for their ability to improve the reliability and reduce the latency. We identify that enabling long-term evolution to coexist in the unlicensed spectrum is also a potential enabler of URLLC in the unlicensed band, and provide numerical evaluations. Lastly, this paper discusses the potential future research directions and challenges in achieving the URLLC requirements

Network coding meets multimedia: a review

While every network node only relays messages in a traditional communication system, the recent network coding (NC) paradigm proposes to implement simple in-network processing with packet combinations in the nodes. NC extends the concept of "encoding" a message beyond source coding (for compression) and channel coding (for protection against errors and losses). It has been shown to increase network throughput compared to traditional networks implementation, to reduce delay and to provide robustness to transmission errors and network dynamics. These features are so appealing for multimedia applications that they have spurred a large research effort towards the development of multimedia-specific NC techniques. This paper reviews the recent work in NC for multimedia applications and focuses on the techniques that fill the gap between NC theory and practical applications. It outlines the benefits of NC and presents the open challenges in this area. The paper initially focuses on multimedia-specific aspects of network coding, in particular delay, in-network error control, and mediaspecific error control. These aspects permit to handle varying network conditions as well as client heterogeneity, which are critical to the design and deployment of multimedia systems. After introducing these general concepts, the paper reviews in detail two applications that lend themselves naturally to NC via the cooperation and broadcast models, namely peer-to-peer multimedia streaming and wireless networkin

Cellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Towards 6G

The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, and near real-time connectivity is the major challenge in enabling a smart connected world. This paper provides a comprehensive survey on existing and emerging communication solutions for serving IoT applications in the context of cellular, wide-area, as well as non-terrestrial networks. Specifically, wireless technology enhancements for providing IoT access in fifth-generation (5G) and beyond cellular networks, and communication networks over the unlicensed spectrum are presented. Aligned with the main key performance indicators of 5G and beyond 5G networks, we investigate solutions and standards that enable energy efficiency, reliability, low latency, and scalability (connection density) of current and future IoT networks. The solutions include grant-free access and channel coding for short-packet communications, non-orthogonal multiple access, and on-device intelligence. Further, a vision of new paradigm shifts in communication networks in the 2030s is provided, and the integration of the associated new technologies like artificial intelligence, non-terrestrial networks, and new spectra is elaborated. Finally, future research directions toward beyond 5G IoT networks are pointed out.Comment: Submitted for review to IEEE CS&

Measurement-Adaptive Cellular Random Access Protocols

This work considers a single-cell random access channel (RACH) in cellular wireless networks. Communications over RACH take place when users try to connect to a base station during a handover or when establishing a new connection. Within the framework of Self-Organizing Networks (SONs), the system should self- adapt to dynamically changing environments (channel fading, mobility, etc.) without human intervention. For the performance improvement of the RACH procedure, we aim here at maximizing throughput or alternatively minimizing the user dropping rate. In the context of SON, we propose protocols which exploit information from measurements and user reports in order to estimate current values of the system unknowns and broadcast global action-related values to all users. The protocols suggest an optimal pair of user actions (transmission power and back-off probability) found by minimizing the drift of a certain function. Numerical results illustrate considerable benefits of the dropping rate, at a very low or even zero cost in power expenditure and delay, as well as the fast adaptability of the protocols to environment changes. Although the proposed protocol is designed to minimize primarily the amount of discarded users per cell, our framework allows for other variations (power or delay minimization) as well.Comment: 31 pages, 13 figures, 3 tables. Springer Wireless Networks 201

Design and implementation of simulation tools, protocols and architectures to support service platforms on vehicular networks

Tesis por compendioProducts related with Intelligent Transportation Systems (ITS) are becoming a reality on our roads. All car manufacturers are starting to include Internet access in their vehicles and to integrate smartphones directly from the dashboard, but more and more services will be introduced in the near future. Connectivity through "vehicular networks" will become a cornerstone of every new proposal, and offering an adequate quality of service is obviously desirable. However, a lot of work is needed for vehicular networks to offer performances similar to those of the wired networks. Vehicular networks can be characterized by two main features: high variability due to mobility levels that can reach up to 250 kilometers per hour, and heterogeneity, being that various competing versions from different vendors have and will be released. Therefore, to make the deployment of efficient services possible, an extensive study must be carried out and adequate tools must be proposed and developed. This PhD thesis addresses the service deployment problem in these networks at three different levels: (i) the physical and link layer, showing an exhaustive analysis of the physical channel and models; (ii) the network layer, proposing a forwarding protocol for IP packets; and (iii) the transport layer, where protocols are proposed to improve data delivery. First of all, the two main wireless technologies used in vehicular networks where studied and modeled, namely the 802.11 family of standards, particularly 802.11p, and the cellular networks focusing on LTE. Since 802.11p is a quite mature standard, we defined (i) a propagation and attenuation model capable of replicating the transmission range and the fading behavior of real 802.11p devices, both in line-of-sight conditions and when obstructed by small obstacles, and (ii) a visibility model able to deal with large obstacles, such as buildings and houses, in a realistic manner. Additionally, we proposed a model based on high-level performance indicators (bandwidth and delay) for LTE, which makes application validation and evaluation easier. At the network layer, a hybrid protocol called AVE is proposed for packet forwarding by switching among a set of standard routing strategies. Depending on the specific scenario, AVE selects one out of four different routing solutions: a) two-hop direct delivery, b) Dynamic MANET On-demand (DYMO), c) greedy georouting, and d) store-carry-and-forward technique, to dynamically adapt its behavior to the specific situation. At the transport layer, we proposed a content delivery protocol for reliable and bidirectional unicast communication in lossy links that improves content delivery in situations where the wireless network is the bottleneck. It has been designed, validated, optimized, and its performance has been analyzed in terms of throughput and resource efficiency. Finally, at system level, we propose an edge-assisted computing model that allows reducing the response latency of several queries by placing a computing unit at the network edge. This way, traffic traversal through the Internet is avoided when not needed. This scheme could be used in both 802.11p and cellular networks, and in this thesis we decided to focus on its evaluation using LTE networks. The platform presented in this thesis combines all the individual efforts to create a single efficient platform. This new environment could be used by any provider to improve the quality of the user experience obtainable through the proposed vehicular network-based services.Los productos relacionados con los Sistemas Inteligentes de Transporte (ITS) se están transformando en una realidad en nuestras carreteras. Todos los fabricantes de coches comienzan a incluir acceso a internet en sus vehículos y a facilitar su integración con los teléfonos móviles, pero más y más servicios se introducirán en el futuro. La conectividad usando las "redes vehiculares" se convertirá en la piedra angular de cada nueva propuesta, y ofrecer una calidad de servicio adecuada será, obviamente, deseable. Sin embargo, se necesita una gran cantidad de trabajo para que las redes vehiculares ofrezcan un rendimiento similar al de las redes cableadas. Las redes vehiculares quedan definidas por sus dos características básicas: alto dinamismo, pues los nodos pueden alcanzar una velocidad relativa de más de 250 km/h; y heterogeneidad, por la gran cantidad de propuestas diferentes que los fabricantes están lanzando al mercado. Por ello, para hacer posible el despliegue de servicios sobre ellas, se impone la necesidad de hacer un estudio en profundidad de este entorno, y deben de proponerse y desarrollarse las herramientas adecuadas. Esta tesis ataca la problemática del despliegue de servicios en estas redes a tres niveles diferentes: (i) el nivel físico y de enlace, mostrando varios análisis en profundidad del medio físico y modelos derivados para su simulación; (ii) el nivel de red, proponiendo un protocolo de difusión de la información para los paquetes IP; y (iii) el nivel de transporte, donde otros protocolos son propuestos para mejorar el rendimiento del transporte de datos. En primer lugar, se han estudiado y modelado las dos principales tecnologías inalámbricas que se utilizan para la comunicación en redes vehiculares, la rama de estándares 802.11, en concreto 802.11p; y la comunicación celular, en particular LTE. Dado que el estándar 802.11p es un estándar bastante maduro, nos centramos en crear (i) un modelo de propagación y atenuación capaz de replicar el rango de transmisión de dispositivos 802.11p reales, en condiciones de visión directa y obstrucción por pequeños obstáculos, y (ii) un modelo de visibilidad capaz de simular el efecto de grandes obstáculos, como son los edifcios, de una manera realista. Además, proponemos un modelo basado en indicadores de rendimiento de alto nivel (ancho de banda y retardo) para LTE, que facilita la validación y evaluación de aplicaciones. En el plano de red, se propone un protocolo híbrido, llamado AVE, para el encaminamiento y reenvío de paquetes usando un conjunto de estrategias estándar de enrutamiento. Dependiendo del escenario, AVE elige entre cuatro estrategias diferentes: a) entrega directa a dos saltos, b) Dynamic MANET On-demand (DYMO) c) georouting voraz, y d) una técnica store-carry-and- forward, para adaptar su comportamiento dinámicamente a cada situación. En el plano de transporte, se propone un protocolo bidireccional de distribución de contenidos en canales con pérdidas que mejora la entrega de contenidos en situaciones en las que la red es un cuello de botella, como las redes inalámbricas. Ha sido diseñado, validado, optimizado, y su rendimiento ha sido analizado en términos de productividad y eficiencia en la utilización de recursos. Finalmente, a nivel de sistema, proponemos un modelo de computación asistida que permite reducir la latencia en la respuesta a muchas consultas colocando una unidad de computación en el borde de la red, i.e., la red de acceso. Este esquema podría ser usado en redes basadas en 802.11p y en redes celulares, si bien en esta tesis decidimos centrarnos en su evaluación usando redes LTE. La plataforma presentada en esta tesis combina todos los esfuerzos individuales para crear una plataforma única y eficiente. Este nuevo entorno puede ser usado por cualquier proveedor para mejorar la calidad de la experiencia de usuario en los servicios desplegados sobre redes vehiculares.Els productes relacionats amb els sistemes intel · ligents de transport (ITS) s'estan transformant en una realitat en les nostres carreteres. Tots els fabri- cants de cotxes comencen a incloure accés a internet en els vehicles i a facilitar- ne la integració amb els telèfons mòbils, però en el futur més i més serveis s'hi introduiran. La connectivitat usant les xarxes vehicular esdevindrà la pedra angular de cada nova proposta, i oferir una qualitat de servei adequada serà, òbviament, desitjable. No obstant això, es necessita una gran quantitat de treball perquè les xarxes vehiculars oferisquen un rendiment similar al de les xarxes cablejades. Les xarxes vehiculars queden definides per dues característiques bàsiques: alt dinamisme, ja que els nodes poden arribar a una velocitat relativa de més de 250 km/h; i heterogeneïtat, per la gran quantitat de propostes diferents que els fabricants estan llançant al mercat. Per això, per a fer possible el desplegament de serveis sobre aquestes xarxes, s'imposa la necessitat de fer un estudi en profunditat d'aquest entorn, i cal proposar i desenvolupar les eines adequades. Aquesta tesi ataca la problemàtica del desplegament de serveis en aquestes xarxes a tres nivells diferents: (i) el nivell físic i d'enllaç , mostrant diverses anàlisis en profunditat del medi físic i models derivats per simular-lo; (ii) el nivell de xarxa, proposant un protocol de difusió de la informació per als paquets IP; i (iii) el nivell de transport, on es proposen altres protocols per a millorar el rendiment del transport de dades. En primer lloc, s'han estudiat i modelat les dues principals tecnologies sense fils que s'utilitzen per a la comunicació en xarxes vehiculars, la branca d'estàndards 802.11, en concret 802.11p; i la comunicació cel · lular, en partic- ular LTE. Atès que l'estàndard 802.11p és un estàndard bastant madur, ens centrem a crear (i) un model de propagació i atenuació capaç de replicar el rang de transmissió de dispositius 802.11p reals, en condicions de visió directa i obstrucció per petits obstacles, i (ii) un model de visibilitat capaç de simular l'efecte de grans obstacles, com són els edificis, d'una manera realista. A més, proposem un model basat en indicadors de rendiment d'alt nivell (ample de banda i retard) per a LTE, que facilita la validació i l'avaluació d'aplicacions. En el pla de xarxa, es proposa un protocol híbrid, anomenat AVE, per a l'encaminament i el reenviament de paquets usant un conjunt d'estratègies estàndard d'encaminament. Depenent de l'escenari , AVE tria entre quatre estratègies diferents: a) lliurament directe a dos salts, b) Dynamic MANET On-demand (DYMO) c) georouting voraç, i d) una tècnica store-carry-and- forward, per a adaptar-ne el comportament dinàmicament a cada situació. En el pla de transport, es proposa un protocol bidireccional de distribució de continguts en canals amb pèrdues que millora el lliurament de continguts en situacions en què la xarxa és un coll de botella, com les xarxes sense fils. Ha sigut dissenyat, validat, optimitzat, i el seu rendiment ha sigut analitzat en termes de productivitat i eficiència en la utilització de recursos. Finalment, a nivell de sistema, proposem un model de computació assistida que permet reduir la latència en la resposta a moltes consultes col · locant una unitat de computació a la vora de la xarxa, és a dir, la xarxa d'accés. Aquest esquema podria ser usat en xarxes basades en 802.11p i en xarxes cel · lulars, si bé en aquesta tesi decidim centrar-nos en la seua avaluació usant xarxes LTE. La plataforma presentada en aquesta tesi combina tots els esforços indi- viduals per a crear una plataforma única i eficient. Aquest nou entorn pot ser usat per qualsevol proveïdor per a millorar la qualitat de l'experiència d'usuari en els serveis desplegats sobre xarxes vehiculars.Báguena Albaladejo, M. (2017). Design and implementation of simulation tools, protocols and architectures to support service platforms on vehicular networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/85333TESISCompendi