Multiband Spectrum Access: Great Promises for Future Cognitive Radio Networks

Cognitive radio has been widely considered as one of the prominent solutions to tackle the spectrum scarcity. While the majority of existing research has focused on single-band cognitive radio, multiband cognitive radio represents great promises towards implementing efficient cognitive networks compared to single-based networks. Multiband cognitive radio networks (MB-CRNs) are expected to significantly enhance the network's throughput and provide better channel maintenance by reducing handoff frequency. Nevertheless, the wideband front-end and the multiband spectrum access impose a number of challenges yet to overcome. This paper provides an in-depth analysis on the recent advancements in multiband spectrum sensing techniques, their limitations, and possible future directions to improve them. We study cooperative communications for MB-CRNs to tackle a fundamental limit on diversity and sampling. We also investigate several limits and tradeoffs of various design parameters for MB-CRNs. In addition, we explore the key MB-CRNs performance metrics that differ from the conventional metrics used for single-band based networks.Comment: 22 pages, 13 figures; published in the Proceedings of the IEEE Journal, Special Issue on Future Radio Spectrum Access, March 201

Discrete-Time Mixing Receiver Architecture for RF-Sampling Software-Defined Radio

A discrete-time (DT) mixing architecture for RF-sampling receivers is presented. This architecture makes RF sampling more suitable for software-defined radio (SDR) as it achieves wideband quadrature demodulation and wideband harmonic rejection. The paper consists of two parts. In the first part, different downconversion techniques are classified and compared, leading to the definition of a DT mixing concept. The suitability of CT-mixing and RF-sampling receivers to SDR is also discussed. In the second part, we elaborate the DT-mixing architecture, which can be realized by de-multiplexing. Simulation shows a wideband 90° phase shift between I and Q outputs without systematic channel bandwidth limitation. Oversampling and harmonic rejection relaxes RF pre-filtering and reduces noise and interference folding. A proof-of-concept DT-mixing downconverter has been built in 65 nm CMOS, for 0.2 to 0.9 GHz RF band employing 8-times oversampling. It can reject 2nd to 6th harmonics by 40 dB typically and without systematic channel bandwidth limitation. Without an LNA, it achieves a gain of -0.5 to 2.5 dB, a DSB noise figure of 18 to 20 dB, an IIP3 = +10 dBm, and an IIP2 = +53 dBm, while consuming less than 19 mW including multiphase clock generation

Signal acquisition challenges in mobile systems

In recent decades, the advent of mobile computing has changed human lives by providing information that was not available in the past. The mobile computing platform opens a new door to the connected world in which various forms of hand-held and wearable systems are ubiquitous. A single mobile device plays multiple roles and shapes human lives towards a better future. In these systems, sensor-based data acquisition plays an essential role in generating and providing useful information. The increased number of sensors is embedded in a single device in order to process various signal modalities. In practice, more than 30 data converters are required in designing a mobile system in which the data-converting blocks become among the most power-hungry components in battery-operated systems. Due to the increased variety of sensors, mobile systems are meant to face several obstacles. For example, the increased number of sensors increase system power consumption during the system operation. The increased power consumption directly affects operation time because mobile systems are powered by a limited energy source. Moreover, an increased amount of information also gives rise to bandwidth problems in communication due to the increased volume of data transmission. Also, this system design requires a larger area in a silicon die so that multiple signal paths can be placed without cross-channel interference. Therefore, the system design has presented a challenge in terms of trying to resolve the design constraints such as power consumption, bandwidth usage, storage space, and design complexity issues. To overcome these obstacles, in this dissertation, efficient data acquisition and processing methods are investigated. Specifically, this thesis considers the problems of energy-efficient sampling and binary event detection. This dissertation begins by presenting a new signal sampling scheme that enables higher precision signal conversion in compressed-sensing-based signal acquisition. The proposed scheme is based on the popular successive approximation register and employs a modified compressive sensing technique to increase the resolution of successive-approximation-register (SAR) analog-to-digital converter (ADC) architecture. Circuit-level architecture is discussed to implement the proposed scheme using the SAR ADC architecture. A non-uniform quantization scheme is proposed and it improves data quality after data acquisition. The proposed scheme is expected to be used for medium- or high- frequency data conversion. Secondly, the possibility of using fewer ADCs than channels is studied by leveraging sparse-signal representation and blind-source-separation (BSS) techniques. In particular, this dissertation examines the problem of using a single ADC or quantizer system for digitizing multi-channel inputs. Mixing and de-mixing strategies are extensively studied for sampling frequency-sparse signals and the proposed multi-channel architecture can be easily implemented using today's analog/mixed-signal circuits. The third part of this dissertation investigates a binary hypothesis testing problem. In mobile devices such as smartphones and tablet PCs, a major portion of energy is consumed in user interfaces (LCD display and touch input processing). For accurate detection and better user interface, energy-efficient sensing and detection schemes are necessary to manage multiple sensor inputs. A highly efficient detection scheme is presented that can detect binary events reliably with a fraction of the energy consumption required in the conventional energy detection.Electrical and Computer Engineerin

Fully-passive switched-capacitor techniques for high performance SAR ADC design

In recent years, SAR ADC becomes more and more popular in various low-power applications such as wireless sensors and low energy radios due to its circuit simplicity, high power efficiency, and scaling compatibility. However, its speed is limited by its successive approximation procedures and its power efficiency greatly reduces with the ADC resolution going beyond 10 bit. To address these issues, this thesis proposes to embed two techniques: 1) compressive sensing (CS) and 2) noise shaping (NS) to a conventional SAR ADC. The realization of both techniques are based on fully-passive switched-capacitor techniques. CS is a recently emerging sampling paradigm, stating that the sparsity of a signal can be exploited to reduce the ADC sampling rate below the Nyquist rate. Different from conventional CS frameworks which require dedicated analog CS encoders, this thesis proposes a fully-passive CS-SAR ADC architecture which only requires minor modification to a conventional SAR ADC. Two chips are fabricated in a 0.13 µm process to prove the concept. One chip is a single-channel CS-SAR ADC which can reduce the ADC conversion rate by 4 times, thus reducing the ADC power by 4 times. In many wireless sensing applications, multiple ADCs are commonly required to sense multi-channel signals such as multi-lead ECG sensing and parallel neural recording. Therefore, the other chip is a multi-channel CS-SAR ADC which can simultaneously convert 4-channel signals with a sampling rate of one channel’s Nyquist rate. At 0.8 V and 1 MS/s, both chips achieve an effective Walden FoM of around 5 fJ/conversion-step. This thesis also proposes a novel NS SAR ADC architecture that is simple, robust and low power for high-resolution applications. Compared to conventional ∆Σ ADCs, it replaces the power-hungry active integrator with a passive integrator which only requires one switch and two capacitors. Compared to previous 1st-order NS SAR ADC works, it achieves the best NS performance and can be easily extended to 2nd-order. A 1st-order 10-bit NS SAR ADC is fabricated in a 0.13 µm process. Through NS, SNDR increases by 6 dB with OSR doubled, achieving a 12- bit ENOB at OSR = 8. An improved version of a 2nd-order 9-bit NS SAR ADC is designed and simulated in a 40 nm process. The SNDR increases by 10 dB with OSR doubled, achieving a 14-bit ENOB at OSR = 16. At a bandwidth of 312.5 kHz, the Schreier FoM is 181 dB and the Walden FoM is 12.5 fJ/conversion-step, proving that the proposed NS SAR ADC architecture can achieve high resolution and high power efficiency simultaneously.Electrical and Computer Engineerin