Next Generation Silicon Photonic Transceiver: From Device Innovation to System Analysis

Silicon photonics is recognized as a disruptive technology that has the potential to reshape many application areas, for example, data center communication, telecommunications, high-performance computing, and sensing. The key capability that silicon photonics offers is to leverage CMOS-style design, fabrication, and test infrastructure to build compact, energy-efficient, and high-performance integrated photonic systems-on- chip at low cost. As the need to squeeze more data into a given bandwidth and a given footprint increases, silicon photonics becomes more and more promising. This work develops and demonstrates novel devices, methodologies, and architectures to resolve the challenges facing the next-generation silicon photonic transceivers. The first part of this thesis focuses on the topology optimization of passive silicon photonic devices. Specifically, a novel device optimization methodology - particle swarm optimization in conjunction with 3D finite-difference time-domain (FDTD), has been proposed and proven to be an effective way to design a wide range of passive silicon photonic devices. We demonstrate a polarization rotator and a 90◦ optical hybrid for polarization-diversity and phase-diversity communications - two important schemes to increase the communication capacity by increasing the spectral efficiency. The second part of this thesis focuses on the design and characterization of the next- generation silicon photonic transceivers. We demonstrate a polarization-insensitive WDM receiver with an aggregate data rate of 160 Gb/s. This receiver adopts a novel architecture which effectively reduces the polarization-dependent loss. In addition, we demonstrate a III-V/silicon hybrid external cavity laser with a tuning range larger than 60 nm in the C-band on a silicon-on-insulator platform. A III-V semiconductor gain chip is hybridized into the silicon chip by edge-coupling to the silicon chip. The demonstrated packaging method requires only passive alignment and is thus suitable for high-volume production. We also demonstrate all silicon-photonics-based transmission of 34 Gbaud (272 Gb/s) dual-polarization 16-QAM using our integrated laser and silicon photonic coherent transceiver. The results show no additional penalty compared to commercially available narrow linewidth tunable lasers. The last part of this thesis focuses on the chip-scale optical interconnect and presents two different types of reconfigurable memory interconnects for multi-core many-memory computing systems. These reconfigurable interconnects can effectively alleviate the memory access issues, such as non-uniform memory access, and Network-on-Chip (NoC) hot-spots that plague the many-memory computing systems by dynamically directing the available memory bandwidth to the required memory interface

Linearization techniques to suppress optical nonlinearity

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.This thesis is shown the implementation of the linearization techniques such as feedforward and pre-distortion feedback linearization to suppress the optical components nonlinearities caused by the fibre and semiconductor optical amplifier (SOA). The simulation verified these two linearization techniques for single tone direct modulation, two tone indirect modulation and ultra wideband input to the optical fibre. These techniques uses the amplified spontaneously emission (ASE) noise reduction in two loops of SOA by a feed-forward and predistortion linearizer and is shown more than 6dB improvement. Also it investigates linearization for the SOA amplifier to cancel out the third order harmonics or inter-modulation distortion (IMD) or four waves mixing. In this project, more than 20 dB reductions is seen in the spectral re-growth caused by the SOA. Amplifier non-linearity becomes more severe with two strong input channels leading to inter-channel distortion which can completely mask a third adjacent channel. The simulations detailed above were performed utilizing optimum settings for the variable gain, phase and delay components in the error correction loop of the feed forward and Predistortion systems and hence represent the ideal situation of a perfect feed-forward and Predistortion system. Therefore it should be consider that complexity of circuit will increase due to amplitude, phase and delay mismatches in practical design. Also it has describe the compatibility of Software Defined Radio with Hybrid Fibre Radio with simulation model of wired optical networks to be used for future research investigation, based on the star and ring topologies for different modulation schemes, and providing the performance for these configurations

Computation of Dispersion Penalty for the Analysis of WDM Link Quality

The provisioning of light path over WDM/DWDM network is a challenging factor, which depends on various physical layer impairments such as dispersion in fiber. We proposed a light path provisioning mechanism by considering the effect of dispersion in fiber termed as dispersion penalty, which is the prominent effect at high speed WDM network. In the case of non-ideal filter, light path provisioning without considering the physical layer impairments does not satisfy the signal quality guaranteed transmission. In this algorithm, Quality of Service is described in terms of dispersion penalty values with an assumption that the entire client has a requirement of penalty less than 2 Db. Here we have analyzed the degradation in bit rate due to the effect of dispersion. The maximum possible length of fiber is also reduced due to high dispersion in fiber. Dispersion penalty is the increment in the received power to eliminate the effect of some undesirable distortion in optical fiber. Dispersion penalty is calculated in terms of bit rate and band width for each data path. The proposal of dispersion penalty budgeting is to ensure that the optical power reaching the receiver is adequate under all circumstances. The proposed algorithm defines a mechanism for effective light path provisioning by comparing the requirement of client and the available resources of the network

Silicon Photonic Platforms and Systems for High-speed Communications

Data communication is a critical component of modern technology in our society. There is an increasing reliance on information being at our fingers tips and we expect a low-latency, high-bandwidth connection to deliver entertainment or enhanced productivity. In order to serve this demand, communications devices are being pressed for smaller form factors, higher data throughput, lower power consumption and lower cost. Similar demands exist in a number of applications including metro/long-haul telecommunications, shorter datacenter links and supercomputing. Silicon photonics promises to be a technology that will solve some of the difficulties with improving communication devices. Building photonics in silicon allows for reuse of the same fabrication technology that is used by the CMOS electronics industry, potentially allowing for large volumes, high yields and low costs. Part I of this thesis details the design of components needed in a high-speed silicon photonic platform to meet the current challenges for high-speed communications. The author’s work in modeling photodetectors resulted in improving photodetector bandwidth from 30 GHz to 67 GHz, the fastest reported at the time of publication. Details regarding the optimization and test of modulators are also presented with the first-reported 50 Gbps modulator at 1310-nm. A large scale parallel channel demonstration of high-speed silicon photonics is then presented showing the potential scalability for silicon photonics systems. A full transceiver requires a number of components other than the photodetector and modulator that are the core active pieces of a silicon photonics platform. Part II includes work on the design and test of silicon photonic components providing functionality beyond the photodetector and modulator. A novel design integrating Metal-Semiconductor Field Effect Transistors (MESFETs) into a silicon photonics platform without process change is shown. This integration enables enhanced control functionality with minimal overhead. The critical final piece for a silicon photonics platform, adding a light source, is demonstrated along with performance results of the resulting tunable, extended C-band laser. In Part III, previous work on an enhanced silicon photonics platform with complementary components is used to build a high-speed integrated coherent link and then tested with a silicon photonics-based tunable laser. The transceiver was shown to operate at 34 Gbaud dual-polarization 16-QAM for a total of 272 Gbps over a single channel. This was the first published demonstration of an integrated coherent where all of the optics were built in a silicon photonics platform

All-optical aggregation and distribution of traffic in large metropolitan area networks using multi-Tb/s S-BVTs

Current metropolitan area network architectures are based on a number of hierarchical levels that aggregate traffic toward the core at the IP layer. In this setting, routers are interconnected by means of fixed transceivers operating on a point-to-point basis where the rates of transceivers need to match. This implies a great deal of intermediate transceivers to collect traffic and groom and send it to the core. This paper proposes an alternative scheme based on sliceable bandwidth/bitrate variable transceivers (S-BVTs) where the slice-ability property is exploited to perform the aggregation of traffic from multiple edges �� -to-1 rather than 1-to-1. This approach can feature relevant cost reductions through IP offloading at intermediate transit nodes but requires viable optical signal-to-noise ratio (OSNR) margins for all-optical transmission through the network. In this work, we prove through simulation the viability and applicability of this technique in large metro networks with a vertical-cavity-surface-emitting laser-based S-BVT design to target net capacities per channel of 25, 40, and 50 Gb/s. The study reveals that this technology can support most of the paths required for IP offloading after simulation in a semi-synthetic topology modeling a 20-million-inhabitant metropolitan area. Moreover, OSNR margins enable the use of protection paths (secondary disjoint paths) between the target node and the core much longer than primary paths in terms of both the number of intermediate hops and kilometers.European Union H2020 project PASSION, grant no. 780326 (http://www.passion-project.eu/)