Impact of Channel Disturbances on Current Narrowband Power Line Communications and Lessons to Be Learnt for the Future Technologies

[EN] The electricity network is a complex communication medium with properties that depend on both the topology of the grid and the usage pattern of the connected devices. These devices generate channel disturbances during normal operation, which need to be overcome by power line communications (PLC) transmission technologies for ensuring communication. This paper analyzes the influence of the channel disturbances on the performance of the physical layer of the main narrowband PLC technologies approved by international communication organisms and currently deployed in Europe: PoweRline Intelligent Metering Evolution (PRIME) 1.3.6, PRIME 1.4 and G3-PLC. The methodology of this paper applies a standardized test method, metrics and a set of representative channel disturbances defined by the European Telecommunications Standards Institute (ETSI). Moreover, noise recordings from field measurements in an environment equipped with distributed energy resources (DER) complete the subset of the types of noise used in the study. This paper develops a replicable, fully automated, and cost optimized test scenario, based on an innovative Virtual PLC Laboratory, which provides a replicable and automated test process, where a wide range of channel disturbances can be accurately replicated, and the performance of the PLC technologies can be compared under the same conditions. The results of this paper provide important conclusions to be applied in the development of future PLC technologie

Simulation-Based Evaluation of the Performance of Broadband over Power Lines with Multiple Repeaters in Linear Topology of Distribution Substations

Broadband over Power Lines (BPL) is considered a promising communication technology in the concept of Smart Grids. This paper evaluates networks based on BPL, with a focus on the impact of repeaters in the linear topology of distribution substations. In large-scale Smart Grids network planning, positions of repeaters have to be carefully chosen. This article should help to determine such positions and limitations of BPL linear topology networks. Laboratory and on-field measurements and their results are presented in this article. Results show the impact of repeater’s deployment for different testing methodologies also with regard to other already presented studies. Measured values and the determined impacts of repeaters are later used as input data for simulation of the linear BPL topology in terms of network throughput with multiple streams and bottlenecks. These occur especially on lines shared by multiple communicating nodes. Furthermore, the simulation investigates the balancing time of multiple data streams throughput. The simulation shows that the throughput balancing can occupy a significant time slot, up to tens of seconds before the throughput of different streams balances. Also, the more data is generated, the more time the balancing time takes. Additionally, the throughput drop caused by a repeater is determined into the range of 35–60%. Based on the measurement and simulation results, lessons learned are presented, and possible performance improvements are discussed

A Novel Methodology for the Scalability Analysis of ICT Systems for Smart Grids Based on SGAM: The InteGrid Project Approach

Information and Communication Technology (ICT) infrastructures are at the heart of emerging Smart Grid scenarios with high penetration of Distributed Energy Resources (DER). The scalability of such ICT infrastructures is a key factor for the large scale deployment of the aforementioned Smart Grid solutions, which could not be ensured by small-scale pilot demonstrations. This paper presents a novel methodology that has been developed in the scope of the H2020 project InteGrid, which enables the scalability analysis of ICT infrastructures for Smart Grids. It is based on the Smart Grid Architecture Model (SGAM) framework, which enables a standardized and replicable approach. This approach consists of two consecutive steps: a qualitative analysis that aims at identifying potential bottlenecks in an ICT infrastructure; and a quantitative analysis of the identified critical links under stress conditions by means of simulations with the aim of evaluating their operational limits. In this work the proposed methodology is applied to a cluster of solutions demonstrated in the InteGrid Slovenian pilot. This pilot consists of a Large Customer Commercial Virtual Power Plant (VPP) that provides flexibility in medium voltage for tertiary reserve and a Traffic Light System (TLS) to validate such flexibility offers. This approach creates an indirect Transmission System Operator (TSO)—Distribution System Operator (DSO) coordination scheme

Análisis del impacto de las perturbaciones de canal sobre las tecnologías PLC de banda estrecha.

350 p