227 research outputs found
Electrostrictive Polymers for Mechanical-to-Electrical Energy Harvesting
Research of electrostrictive polymers has generated new opportunities for harvesting energy from the surrounding environment and converting it into usable electrical energy. Piezoelectric ceramic based devices have long been used in energy harvesting for converting mechanical motion to electrical energy. Nevertheless, those materials tend to be unsuitable for low-frequency mechanical excitations such as human movement. Since organic polymers are typically softer and more flexible, the translated electrical energy output is considerably higher under the same mechanical force. Currently, investigations in using electroactive polymers for energy harvesting, and mechanical-to-electrical energy conversion, are beginning to show potential for this application. In this paper we discuss methods of energy harvesting using membrane structures and various methods used to convert it into usable energy. Since polymers are typically used in capacitive energy harvesting designs, the uses of polymer materials with large relative permittivities have demonstrated success for mechanical to electrical energy conversion. Further investigations will be used to identify suitable micro-electro mechanical systems (MEMs) structures given specific types of low-frequency mechanical excitations (10-100Hz)
An expert system for restructurable control
Work in progress on an expert system which restructures and tunes control systems on-line is presented. The expert system coordinates the different methods for redesigning and implementing the control strategies due to system changes. The research is directed toward aircraft and jet engine applications. The implementation is written in LISP and is currently running on a special purpose LISP machine
Design of FerroElectric MEMS energy harvesting devices
Waste heat is a widely available but little used source of power. Converting a thermal gradient into electricity is conventionally done using the Seebeck effect, but devices that use this effect are naturally inefficient. An alternate approach uses microelectromechanical systems (MEMS) to generate movement and time-varying temperature from a constant temperature gradient. Ferroelectric materials can harvest electricity from moving structures and temperature variations. This concept was realized using traditional silicon microprocessing techniques. A silicon on insulator (SOI) wafer was backside Deep Reactive Ion Etched (DRIE) to form a one mm2 by 7 micron thick silicon/silicon dioxide membrane. Lead zirconate titanate (PZT) was deposited on the membrane and acts as a ferroelectric material. Heating the bulk of the SOI substrate causes an increase in stress and upward deflection of the membrane. The membrane then enters into contact with a cold sink fixed above the substrate. Cooling of the membrane from contact with the cold sink causes actuation downwards of the membrane. The alternating heating and cooling of the PZT layer generates electricity from the pyroelectric effect. The actuation of the membrane generates stress on the PZT layer resulting in electricity from the piezoelectric effect
Engineered surfaces to control secondary electron emission for multipactor suppression
A significant problem for space-based systems is multipactor - an avalanche of electrons caused by repeated secondary electron emission (SEE). The consequences of multipactor range from altering the operation of radio frequency (RF) devices to permanent device damage. Existing efforts to suppress multipactor rely heavily on limiting power levels below a multipactor threshold [1]. This research applies surface micromachining techniques to create porous surfaces to control the secondary electron yield (SEY) of a material for multipactor suppression. Surface characteristics of interest include pore aspect ratio and density. A discussion is provided on the advantage of using electroplating (vice etching) to create porous surfaces for studying the relationships between SEY and pore aspect ratio & density (i.e. porosity). Preventing multipactor through SEY reduction will allow power level restrictions to be eased, leading to more powerful and capable space-based systems
DC Microgrid based on Battery, Photovoltaic, and fuel Cells; Design and Control
Microgrids offer flexibility in power generation in a way of using multiple
renewable energy sources. In the past few years, microgrids become a very
active research area in terms of design and control strategies. Most of the
microgrids use DC/DC converters to connect renewable energy sources to the
load. In this paper, the simulation model of a DC microgrid with three
different energy sources (Lithium-ion battery (LIB), photovoltaic (PV) array,
and fuel cell) and external variant power load is built with MATLAB/Simulink
and the simulative results show that the stability of DC microgrid can be
guaranteed by the proposed maximum power point controller MPPT. The three
energy sources are connected to the load through DC/DC converters, one for
each. This type of topology ensures protection for each energy source as well
as optimum stability at the load
Standardized Testing of Non-Standard Photovoltaic Pavement Surfaces
Emerging photovoltaic products have expanded the applications for the technologies into markets previously unconsidered for what was thought to be a delicate electronic product. One company leading this effort, Solar Roadways, Incorporated, is producing pavement replacing photovoltaic systems and proposing their use in everything from sidewalks to runways. Current pavement testing methods cannot be applied to these non-homogenous structures to identify if they can support the required loads. However, the standards called out specifically for pavements may be able to be translated to these products and their non-homogenous structures and non-standard materials to identify if they are able to perform similarly to standard pavements. This research modified existing test standards in several ways: rigid pavements standards for advanced loading, structural adhesive standards for shear loading, structure specific standards for moisture conditioning, and application specific standards for freeze/thaw cycling. These modifications are due to the fact that the materials in these emerging products do not have established tests to evaluate their performance in non-traditional applications. The future of electronics is dependent on product unique applications. This, in turn, requires finding methods of testing them based on application, extrapolation, or correlation to traditional material testing which enables faster product development and subsequent roll out
Enhancing the thermal performance of temporary fabric structures for the advanced energy efficient shelter system
The focus of this research is to characterize the thermal load on temporary fabric shelters deployed in the Middle East in order to establish realistic contract specification for the thermal performance of future shelters. Three different testing methods were utilized to evaluate shelter thermal performance. Small-scale tests allowed for economical comparisons of different shelter materials and configurations
- …