Secure Multiuser Communications in Wireless Sensor Networks with TAS and Cooperative Jamming

In this paper, we investigate the secure transmission in wireless sensor networks (WSNs) consisting of one multiple-antenna base station (BS), multiple single-antenna legitimate users, one single-antenna eavesdropper and one multiple-antenna cooperative jammer. In an effort to reduce the scheduling complexity and extend the battery lifetime of the sensor nodes, the switch-and-stay combining (SSC) scheduling scheme is exploited over the sensor nodes. Meanwhile, transmit antenna selection (TAS) is employed at the BS and cooperative jamming (CJ) is adopted at the jammer node, aiming at achieving a satisfactory secrecy performance. Moreover, depending on whether the jammer node has the global channel state information (CSI) of both the legitimate channel and the eavesdropper's channel, it explores a zero-forcing beamforming (ZFB) scheme or a null-space artificial noise (NAN) scheme to confound the eavesdropper while avoiding the interference to the legitimate user. Building on this, we propose two novel hybrid secure transmission schemes, termed TAS-SSC-ZFB and TAS-SSC-NAN, for WSNs. We then derive the exact closed-form expressions for the secrecy outage probability and the effective secrecy throughput of both schemes to characterize the secrecy performance. Using these closed-form expressions, we further determine the optimal switching threshold and obtain the optimal power allocation factor between the BS and jammer node for both schemes to minimize the secrecy outage probability, while the optimal secrecy rate is decided to maximize the effective secrecy throughput for both schemes. Numerical results are provided to verify the theoretical analysis and illustrate the impact of key system parameters on the secrecy performance.This work was supported by the National Science Foundation of China (No. 61501507), and the Jiangsu Provincial Natural Science Foundation of China (No. BK20150719). The work of Nan Yang is supported by the Australian Research Council Discovery Project (DP150103905)

Joint Antenna and User Selection for Untrusted Relay Networks

In this paper, we investigate secure communication for an untrusted relay network, in which a source equipped with N S antennas communicates to M users with the help of an untrusted relay. To protect the data confidentially while concurrently relying on the untrusted relays, joint antenna and user selection scheme has been proposed with the aid of cooperative jamming. Furthermore, the impacts of both the number of antennas and the number of users on system performance are studied. Both the secrecy outage probability (SOP) and ergodic secrecy rate (ESR) are derived in closed form, and the secrecy diversity order of the considered networks is proved to be min(N S , M/2). Compared with the traditional single antenna and single source-destination scenario, both SOP and ESR can achieve a great improvement owing to the mutual effects of antenna diversity and user diversity. In addition, numerical results are conducted to demonstrate the validity of the proposed scheme. © 2018 IEEE

User-Pair Selection in Multiuser Cooperative Networks With an Untrusted Relay

This paper investigates the physical-layer security of an amplify-and-forward wireless cooperative network, where N source nodes communicate with their corresponding destination nodes under the help of an untrusted relay. In each slot, only one user-pair is scheduled to transmit the information, and the destination-aided cooperative jamming is adopted to protect information from being intercepted by the untrusted relay. Three user-pair selection schemes have been proposed for the considered system, namely opportunistic user-pair selection (OUS) scheme, greedy user-pair selection (GUS) scheme, and genie-aided user-pair selection scheme. Both the secrecy outage probability and the average secrecy rate have been studied to evaluate the performance of the OUS and GUS schemes, and the asymptotic analysis has also been obtained. It reveals that the proposed schemes can improve the secrecy performance for the cooperative multiuser networks as the number of user-pairs increases. We also prove that the achievable diversity order of both OUS and GUS schemes is N/2 . Finally, numerical and simulation results are presented to validate the accuracy of the developed analytical results

Secure Communication with a Wireless-Powered Friendly Jammer

In this paper, we propose to use a wireless-powered friendly jammer to enable secure communication between a source node and destination node, in the presence of an eavesdropper. We consider a two-phase communication protocol with fixed-rate transmission. In the first phase, wireless power transfer is conducted from the source to the jammer. In the second phase, the source transmits the information-bearing signal under the protection of a jamming signal sent by the jammer using the harvested energy in the first phase. We analytically characterize the long-time behavior of the proposed protocol and derive a closed-form expression for the throughput. We further optimize the rate parameters for maximizing the throughput subject to a secrecy outage probability constraint. Our analytical results show that the throughput performance differs significantly between the single-antenna jammer case and the multi-antenna jammer case. For instance, as the source transmit power increases, the throughput quickly reaches an upper bound with single-antenna jammer, while the throughput grows unbounded with multi-antenna jammer. Our numerical results also validate the derived analytical results.Comment: accepted for publication in IEEE Transactions on Wireless Communication

Secrecy Enhancement in Cooperative Relaying Systems

Cooperative communications is obviously an evolution in wireless networks due to its noticeable advantages such as increasing the coverage as well as combating fading and shadowing effects. However, the broadcast characteristic of a wireless medium which is exploited in cooperative communications leads to a variety of security vulnerabilities. As cooperative communication networks are globally expanded, they expose to security attacks and threats more than ever. Primarily, researchers have focused on upper layers of network architectures to meet the requirements for secure cooperative transmission while the upper-layer security solutions are incapable of combating a number of security threats, e.g., jamming attacks. To address this issue, physical-layer security has been recommended as a complementary solution in the literature. In this thesis, physical layer attacks of the cooperative communication systems are studied, and corresponding security techniques including cooperative jamming, beamforming and diversity approaches are investigated. In addition, a novel security solution for a two-hop decode-and-forward relaying system is presented where the transmitters insert a random phase shift to the modulated data of each hop. The random phase shift is created based on a shared secret among communicating entities. Thus, the injected phase shift confuses the eavesdropper and secrecy capacity improves. Furthermore, a cooperative jamming strategy for multi-hop decode-and-forward relaying systems is presented where multiple non-colluding illegitimate nodes can overhear the communication. The jamming signal is created by the transmitter of each hop while being sent with the primary signal. The jamming signal is known at the intended receiver as it is according to a secret common knowledge between the communicating entities. Hence, artificial noise misleads the eavesdroppers, and decreases their signal-to-noise-ratio. As a result, secrecy capacity of the system is improved. Finally, power allocation among friendly jamming and main signal is proposed to ensure that suggested scheme enhances secrecy

Relaying in the Internet of Things (IoT): A Survey

The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions

Physical Layer Security in Wireless Networks: Design and Enhancement.

PhDSecurity and privacy have become increasingly significant concerns in wireless communication networks, due to the open nature of the wireless medium which makes the wireless transmission vulnerable to eavesdropping and inimical attacking. The emergence and development of decentralized and ad-hoc wireless networks pose great challenges to the implementation of higher-layer key distribution and management in practice. Against this background, physical layer security has emerged as an attractive approach for performing secure transmission in a low complexity manner. This thesis concentrates on physical layer security design and enhancement in wireless networks. First, this thesis presents a new unifying framework to analyze the average secrecy capacity and secrecy outage probability. Besides the exact average secrecy capacity and secrecy outage probability, a new approach for analyzing the asymptotic behavior is proposed to compute key performance parameters such as high signal-to-noise ratio slope, power offset, secrecy diversity order, and secrecy array gain. Typical fading environments such as two-wave with diffuse power and Nakagami-m are taken into account. Second, an analytical framework of using antenna selection schemes to achieve secrecy is provided. In particular, transmit antenna selection and generalized selection combining are considered including its special cases of selection combining and maximal-ratio combining. Third, the fundamental questions surrounding the joint impact of power constraints on the cognitive wiretap channel are addressed. Important design insights are revealed regarding the interplay between two power constraints, namely the maximum transmit at the secondary network and the peak interference power at the primary network. Fourth, secure single carrier transmission is considered in the two-hop decode-andi forward relay networks. A two-stage relay and destination selection is proposed to minimize the eavesdropping and maximize the signal power of the link between the relay and the destination. In two-hop amplify-and-forward untrusted relay networks, secrecy may not be guaranteed even in the absence of external eavesdroppers. As such, cooperative jamming with optimal power allocation is proposed to achieve non-zero secrecy rate. Fifth and last, physical layer security in large-scale wireless sensor networks is introduced. A stochastic geometry approach is adopted to model the positions of sensors, access points, sinks, and eavesdroppers. Two scenarios are considered: i) the active sensors transmit their sensing data to the access points, and ii) the active access points forward the data to the sinks. Important insights are concluded