Design, analysis, and control of a cable-driven parallel platform with a pneumatic muscle active support

Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.The neck is an important part of the body that connects the head to the torso, supporting the weight and generating the movement of the head. In this paper, a cable-driven parallel platform with a pneumatic muscle active support (CPPPMS) is presented for imitating human necks, where cable actuators imitate neck muscles and a pneumatic muscle actuator imitates spinal muscles, respectively. Analyzing the stiffness of the mechanism is carried out based on screw theory, and this mechanism is optimized according to the stiffness characteristics. While taking the dynamics of the pneumatic muscle active support into consideration as well as the cable dynamics and the dynamics of the Up-platform, a dynamic modeling approach to the CPPPMS is established. In order to overcome the flexibility and uncertainties amid the dynamic model, a sliding mode controller is investigated for trajectory tracking, and the stability of the control system is verified by a Lyapunov function. Moreover, a PD controller is proposed for a comparative study. The results of the simulation indicate that the sliding mode controller is more effective than the PD controller for the CPPPMS, and the CPPPMS provides feasible performances for operations under the sliding mode control

Gait-Behavior Optimization Considering Arm Swing and Toe Mechanisms for Biped Robot on Rough Road

芝浦工業大学2019年

RPBP: Rapid-prototyped remote-brain biped with 3D perception

This paper provides the design of a novel open-hardware mini-bipedal robot, named Rapid-Prototyped Remote-Brain BiPed (RPBP), that is developed to provide a low-cost and reliable platform for locomotion and perception research. The robot is made of customized 3D-printed material (ABS plastic) and electronics, and commercial Robotics Dynamixel MX-28 actuators, as well as visual RGB-D and IMU sensing systems. We show that the robot is able to perform some locomotion/visual-odometry tasks and it is easy to switch between different feet designs, providing also a novel Center-of-Pressure (CoP) sensing system, so that it can deal with various types of terrain. Moreover, we provide a description of its control and perception system architecture, as well as our opensource software packages that provide sensing and navigation tools for locomotion and visual odometry on the robot. Finally, we briefly discuss the transferability of some prototype research that has been done on the developed mini-biped, to half or fullsize humanoid robots, such as COMAN or WALK-MAN

A Bioinspired Humanoid Foot Mechanism

This paper introduces an innovative robotic foot design inspired by the functionality and the anatomy of the human foot. Most humanoid robots are characterized by flat, rigid feet with limited mobility, which cannot emulate the physical behavior of the foot–ground interaction. The proposed foot mechanism consists of three main bodies, to represent the heel, plant, and toes, connected by compliant joints for improved balancing and impact absorption. The functional requirements were extracted from medical literature, and were acquired through a motion capture system, and the proposed design was validated with a numerical simulation

Simulation and Framework for the Humanoid Robot TigerBot

Walking humanoid robotics is a developing field. Different humanoid robots allow for different kinds of testing. TigerBot is a new full-scale humanoid robot with seven degrees-of-freedom legs and with its specifications, it can serve as a platform for humanoid robotics research. Currently TigerBot has encoders set up on each joint, allowing for position control, and its sensors and joints connect to Teensy microcontrollers and the ODroid XU4 single-board computer central control unit. The components’ communication system used the Robot Operating System (ROS). This allows the user to control TigerBot with ROS. It’s important to have a simulation setup so a user can test TigerBot’s capabilities on a model before using the real robot. A working walking gait in the simulation serves as a test of the simulator, proves TigerBot’s capability to walk, and opens further development on other walking gaits. A model of TigerBot was set up using the simulator Gazebo, which allowed testing different walking gaits with TigerBot. The gaits were generated by following the linear inverse pendulum model and the basic zero-moment point (ZMP) concept. The gaits consisted of center of mass trajectories converted to joint angles through inverse kinematics. In simulation while the robot follows the predetermined joint angles, a proportional-integral controller keeps the model upright by modifying the flex joint angle of the ankles. The real robot can also run the gaits while suspended in the air. The model has shown the walking gait based off the ZMP concept to be stable, if slow, and the actual robot has been shown to air walk following the gait. The simulation and the framework on the robot can be used to continue work with this walking gait or they can be expanded on for different methods and applications such as navigation, computer vision, and walking on uneven terrain with disturbances

Multi-Focal Visual Servoing Strategies

Multi-focal vision provides two or more vision devices with different fields of view and measurement accuracies. A main advantage of this concept is a flexible allocation of these sensor resources accounting for the current situational and task performance requirements. Particularly, vision devices with large fields of view and low accuracies can be use