Efficient Implementations of Pairing-Based Cryptography on Embedded Systems

Many cryptographic applications use bilinear pairing such as identity based signature, instance identity-based key agreement, searchable public-key encryption, short signature scheme, certificate less encryption and blind signature. Elliptic curves over finite field are the most secure and efficient way to implement bilinear pairings for the these applications. Pairing based cryptosystems are being implemented on different platforms such as low-power and mobile devices. Recently, hardware capabilities of embedded devices have been emerging which can support efficient and faster implementations of pairings on hand-held devices. In this thesis, the main focus is optimization of Optimal Ate-pairing using special class of ordinary curves, Barreto-Naehring (BN), for different security levels on low-resource devices with ARM processors. Latest ARM architectures are using SIMD instructions based NEON engine and are helpful to optimize basic algorithms. Pairing implementations are being done using tower field which use field multiplication as the most important computation. This work presents NEON implementation of two multipliers (Karatsuba and Schoolbook) and compare the performance of these multipliers with different multipliers present in the literature for different field sizes. This work reports the fastest implementation timing of pairing for BN254, BN446 and BN638 curves for ARMv7 architecture which have security levels as 128-, 164-, and 192-bit, respectively. This work also presents comparison of code performance for ARMv8 architectures

Hardware processors for pairing-based cryptography

Bilinear pairings can be used to construct cryptographic systems with very desirable properties. A pairing performs a mapping on members of groups on elliptic and genus 2 hyperelliptic curves to an extension of the finite field on which the curves are defined. The finite fields must, however, be large to ensure adequate security. The complicated group structure of the curves and the expensive field operations result in time consuming computations that are an impediment to the practicality of pairing-based systems. The Tate pairing can be computed efficiently using the ɳT method. Hardware architectures can be used to accelerate the required operations by exploiting the parallelism inherent to the algorithmic and finite field calculations. The Tate pairing can be performed on elliptic curves of characteristic 2 and 3 and on genus 2 hyperelliptic curves of characteristic 2. Curve selection is dependent on several factors including desired computational speed, the area constraints of the target device and the required security level. In this thesis, custom hardware processors for the acceleration of the Tate pairing are presented and implemented on an FPGA. The underlying hardware architectures are designed with care to exploit available parallelism while ensuring resource efficiency. The characteristic 2 elliptic curve processor contains novel units that return a pairing result in a very low number of clock cycles. Despite the more complicated computational algorithm, the speed of the genus 2 processor is comparable. Pairing computation on each of these curves can be appealing in applications with various attributes. A flexible processor that can perform pairing computation on elliptic curves of characteristic 2 and 3 has also been designed. An integrated hardware/software design and verification environment has been developed. This system automates the procedures required for robust processor creation and enables the rapid provision of solutions for a wide range of cryptographic applications

Cryptographic key distribution in wireless sensor networks: a hardware perspective

In this work the suitability of different methods of symmetric key distribution for application in wireless sensor networks are discussed. Each method is considered in terms of its security implications for the network. It is concluded that an asymmetric scheme is the optimum choice for key distribution. In particular, Identity-Based Cryptography (IBC) is proposed as the most suitable of the various asymmetric approaches. A protocol for key distribution using identity based Non-Interactive Key Distribution Scheme (NIKDS) and Identity-Based Signature (IBS) scheme is presented. The protocol is analysed on the ARM920T processor and measurements were taken for the run time and energy of its components parts. It was found that the Tate pairing component of the NIKDS consumes significants amounts of energy, and so it should be ported to hardware. An accelerator was implemented in 65nm Complementary Metal Oxide Silicon (CMOS) technology and area, timing and energy figures have been obtained for the design. Initial results indicate that a hardware implementation of IBC would meet the strict energy constraint of a wireless sensor network node

Novel Area-Efficient and Flexible Architectures for Optimal Ate Pairing on FPGA

While FPGA is a suitable platform for implementing cryptographic algorithms, there are several challenges associated with implementing Optimal Ate pairing on FPGA, such as security, limited computing resources, and high power consumption. To overcome these issues, this study introduces three approaches that can execute the optimal Ate pairing on Barreto-Naehrig curves using Jacobean coordinates with the goal of reaching 128-bit security on the Genesys board. The first approach is a pure software implementation utilizing the MicroBlaze processor. The second involves a combination of software and hardware, with key operations in $F_{p}$ and $F_{p^{2}}$ being transformed into IP cores for the MicroBlaze. The third approach builds on the second by incorporating parallelism to improve the pairing process. The utilization of multiple MicroBlaze processors within a single system offers both versatility and parallelism to speed up pairing calculations. A variety of methods and parameters are used to optimize the pairing computation, including Montgomery modular multiplication, the Karatsuba method, Jacobean coordinates, the Complex squaring method, sparse multiplication, squaring in $G_{\phi 6}F_{p^{12}}$, and the addition chain method. The proposed systems are designed to efficiently utilize limited resources in restricted environments, while still completing tasks in a timely manner.Comment: 13 pages, 8 figures, and 5 table

Secure architectures for pairing based public key cryptography

Along with the growing demand for cryptosystems in systems ranging from large servers to mobile devices, suitable cryptogrophic protocols for use under certain constraints are becoming more and more important. Constraints such as calculation time, area, efficiency and security, must be considered by the designer. Elliptic curves, since their introduction to public key cryptography in 1985 have challenged established public key and signature generation schemes such as RSA, offering more security per bit. Amongst Elliptic curve based systems, pairing based cryptographies are thoroughly researched and can be used in many public key protocols such as identity based schemes. For hardware implementions of pairing based protocols, all components which calculate operations over Elliptic curves can be considered. Designers of the pairing algorithms must choose calculation blocks and arrange the basic operations carefully so that the implementation can meet the constraints of time and hardware resource area. This thesis deals with different hardware architectures to accelerate the pairing based cryptosystems in the field of characteristic two. Using different top-level architectures the hardware efficiency of operations that run at different times is first considered in this thesis. Security is another important aspect of pairing based cryptography to be considered in practically Side Channel Analysis (SCA) attacks. The naively implemented hardware accelerators for pairing based cryptographies can be vulnerable when taking the physical analysis attacks into consideration. This thesis considered the weaknesses in pairing based public key cryptography and addresses the particular calculations in the systems that are insecure. In this case, countermeasures should be applied to protect the weak link of the implementation to improve and perfect the pairing based algorithms. Some important rules that the designers must obey to improve the security of the cryptosystems are proposed. According to these rules, three countermeasures that protect the pairing based cryptosystems against SCA attacks are applied. The implementations of the countermeasures are presented and their performances are investigated

An FPGA-based programmable processor for bilinear pairings

Bilinear pairings on elliptic curves are an active research field in cryptography. First cryptographic protocols based on bilinear pairings were proposed by the year 2000 and they are promising solutions to security concerns in different domains, as in Pervasive Computing and Cloud Computing. The computation of bilinear pairings that relies on arithmetic over finite fields is the most time-consuming in Pairing-based cryptosystems. That has motivated the research on efficient hardware architectures that improve the performance of security protocols. In the literature, several works have focused in the design of custom hardware architectures for pairings, however, flexible designs provide advantages due to the fact that there are several types of pairings and algorithms to compute them. This work presents the design and implementation of a novel programmable cryptoprocessor for computing bilinear pairings over binary fields in FPGAs, which is able to support different pairing algorithms and parameters as the elliptic curve, the tower field and the distortion map. The results show that high flexibility is achieved by the proposed cryptoprocessor at a competitive timing and area usage when it is compared to custom designs for pairings defined over singular/supersingular elliptic curves at a 128-bit security level