Accurate Feature Extraction and Control Point Correction for Camera Calibration with a Mono-Plane Target

The paper addresses two problems related to 3D camera calibration using a single mono-plane calibration target with circular control marks. The first problem is how to compute accurately the locations of the features (ellipses) in images of the target. Since the structure of the control marks is known beforehand, we propose to use a shape-specific searching technique to find the optimal locations of the features. Our experiments have shown this technique generates more accurate feature locations than the state-of-the-art ellipse extraction methods. The second problem is how to refine the control mark locations with unknown manufacturing errors. We demonstrate in a case study, where the control marks are laser printed on a A4 paper, that the manufacturing errors of the control marks can be compensated to a good extent so that the remaining calibration errors are reduced significantly. 1

Sensor for High Speed, High Precision Measurement of 2-D Positions

A sensor system to measure the 2-D position of an object that intercepts a plane in space is presented in this paper. This sensor system was developed with the aim of measuring the height and lateral position of contact wires supplying power to electric locomotives. The sensor comprises two line-scans focused on the zone to be measured and positioned in such a way that their viewing planes are on the same plane. The report includes a mathematical model of the sensor system, and details the method used for calibrating the sensor system. The procedure used for high speed measurement of object position in space is also described, where measurement acquisition time was less than 0.7 ms. Finally, position measurement results verifying system performance in real time are given

A Decoupled Calibration Method for Camera Intrinsic Parameters and Distortion Coefficients

Camera calibration is a necessary process in the field of vision measurement. In this paper, we propose a flexible and high-accuracy method to calibrate a camera. Firstly, we compute the center of radial distortion, which is important to obtain optimal results. Then, based on the radial distortion of the division model, the camera intrinsic parameters and distortion coefficients are solved in a linear way independently. Finally, the intrinsic parameters of the camera are optimized via the Levenberg-Marquardt algorithm. In the proposed method, the distortion coefficients and intrinsic parameters are successfully decoupled; calibration accuracy is further improved through the subsequent optimization process. Moreover, whether it is for relatively small image distortion or distortion larger image, utilizing our method can get a good result. Both simulation and real data experiment demonstrate the robustness and accuracy of the proposed method. Experimental results show that the proposed method can be obtaining a higher accuracy than the classical methods

Spin-scanning Cameras for Planetary Exploration: Imager Analysis and Simulation

In this thesis, a novel approach to spaceborne imaging is investigated, building upon the scan imaging technique in which camera motion is used to construct an image. This thesis investigates its use with wide-angle (≥90° field of view) optics mounted on spin stabilised probes for large-coverage imaging of planetary environments, and focusses on two instruments. Firstly, a descent camera concept for a planetary penetrator. The imaging geometry of the instrument is analysed. Image resolution is highest at the penetrator’s nadir and lowest at the horizon, whilst any point on the surface is imaged with highest possible resolution when the camera’s altitude is equal to that point’s radius from nadir. Image simulation is used to demonstrate the camera’s images and investigate analysis techniques. A study of stereophotogrammetric measurement of surface topography using pairs of descent images is conducted. Measurement accuracies and optimum stereo geometries are presented. Secondly, the thesis investigates the EnVisS (Entire Visible Sky) instrument, under development for the Comet Interceptor mission. The camera’s imaging geometry, coverage and exposure times are calculated, and used to model the expected signal and noise in EnVisS observations. It is found that the camera’s images will suffer from low signal, and four methods for mitigating this – binning, coaddition, time-delay integration and repeat sampling – are investigated and described. Use of these methods will be essential if images of sufficient signal are to be acquired, particularly for conducting polarimetry, the performance of which is modelled using Monte Carlo simulation. Methods of simulating planetary cameras’ images are developed to facilitate the study of both cameras. These methods enable the accurate simulation of planetary surfaces and cometary atmospheres, are based on Python libraries commonly used in planetary science, and are intended to be readily modified and expanded for facilitating the study of a variety of planetary cameras

Forum Bildverarbeitung 2016

Bildverarbeitung spielt in vielen Bereichen der Technik zur schnellen und berührungslosen Datenerfassung eine Schlüsselrolle. Der vorliegende Tagungsband des „Forums Bildverarbeitung“, das am 1. und 2. Dezember 2016 in Karlsruhe als Veranstaltung des Karlsruher Instituts für Technologie und des Fraunhofer-Instituts für Optronik, Systemtechnik und Bildauswertung stattfand, enthält die Aufsätze der eingegangenen Beiträge. Darin wird über aktuelle Trends und Lösungen der Bildverarbeitung berichtet

Three-dimensional scene recovery for measuring sighting distances of rail track assets from monocular forward facing videos

Rail track asset sighting distance must be checked regularly to ensure the continued and safe operation of rolling stock. Methods currently used to check asset line-of-sight involve manual labour or laser systems. Video cameras and computer vision techniques provide one possible route for cheaper, automated systems. Three categories of computer vision method are identified for possible application: two-dimensional object recognition, two-dimensional object tracking and three-dimensional scene recovery. However, presented experimentation shows recognition and tracking methods produce less accurate asset line-of-sight results for increasing asset-camera distance. Regarding three-dimensional scene recovery, evidence is presented suggesting a relationship between image feature and recovered scene information. A novel framework which learns these relationships is proposed. Learnt relationships from recovered image features probabilistically limit the search space of future features, improving efficiency. This framework is applied to several scene recovery methods and is shown (on average) to decrease computation by two-thirds for a possible, small decrease in accuracy of recovered scenes. Asset line-of-sight results computed from recovered three-dimensional terrain data are shown to be more accurate than two-dimensional methods, not effected by increasing asset-camera distance. Finally, the analysis of terrain in terms of effect on asset line-of-sight is considered. Terrain elements, segmented using semantic information, are ranked with a metric combining a minimum line-of-sight blocking distance and the growth required to achieve this minimum distance. Since this ranking measure is relative, it is shown how an approximation of the terrain data can be applied, decreasing computation time. Further efficiency increases are found by decomposing the problem into a set of two-dimensional problems and applying binary search techniques. The combination of the research elements presented in this thesis provide efficient methods for automatically analysing asset line-of-sight and the impact of the surrounding terrain, from captured monocular video.EThOS - Electronic Theses Online ServiceGBUnited Kingdo