451 research outputs found
Optimal Ensemble Control of Loads in Distribution Grids with Network Constraints
Flexible loads, e.g. thermostatically controlled loads (TCLs), are
technically feasible to participate in demand response (DR) programs. On the
other hand, there is a number of challenges that need to be resolved before it
can be implemented in practice en masse. First, individual TCLs must be
aggregated and operated in sync to scale DR benefits. Second, the uncertainty
of TCLs needs to be accounted for. Third, exercising the flexibility of TCLs
needs to be coordinated with distribution system operations to avoid
unnecessary power losses and compliance with power flow and voltage limits.
This paper addresses these challenges. We propose a network-constrained,
open-loop, stochastic optimal control formulation. The first part of this
formulation represents ensembles of collocated TCLs modelled by an aggregated
Markov Process (MP), where each MP state is associated with a given power
consumption or production level. The second part extends MPs to a multi-period
distribution power flow optimization. In this optimization, the control of TCL
ensembles is regulated by transition probability matrices and physically
enabled by local active and reactive power controls at TCL locations. The
optimization is solved with a Spatio-Temporal Dual Decomposition (ST-D2)
algorithm. The performance of the proposed formulation and algorithm is
demonstrated on the IEEE 33-bus distribution model.Comment: 7 pages, 6 figures, accepted PSCC 201
Fast and Reliable Primary Frequency Reserves From Refrigerators with Decentralized Stochastic Control
Due to increasing shares of renewable energy sources, more frequency reserves
are required to maintain power system stability. In this paper, we present a
decentralized control scheme that allows a large aggregation of refrigerators
to provide Primary Frequency Control (PFC) reserves to the grid based on local
frequency measurements and without communication.
The control is based on stochastic switching of refrigerators depending on
the frequency deviation. We develop methods to account for typical lockout
constraints of compressors and increased power consumption during the startup
phase. In addition, we propose a procedure to dynamically reset the thermostat
temperature limits in order to provide reliable PFC reserves, as well as a
corrective temperature feedback loop to build robustness to biased frequency
deviations. Furthermore, we introduce an additional randomization layer in the
controller to account for thermostat resolution limitations, and finally, we
modify the control design to account for refrigerator door openings.
Extensive simulations with actual frequency signal data and with different
aggregation sizes, load characteristics, and control parameters, demonstrate
that the proposed controller outperforms a relevant state-of-the-art
controller.Comment: 44 pages, 17 figures, 9 Tables, submitted to IEEE Transactions on
Power System
Recommended from our members
Provision of secondary frequency regulation by coordinated dispatch of industrial loads and thermal power plants
Demand responsive industrial loads with high thermal inertia have potential to provide ancillary service for frequency regulation in the power market. To capture the benefit, this study proposes a new hierarchical framework to coordinate the demand responsive industrial loads with thermal power plants in an industrial park for secondary frequency control. In the proposed framework, demand responsive loads and generating resources are coordinated for optimal dispatch in two-time scales: (1) the regulation reserve of the industrial park is optimally scheduled in a day-ahead manner. The stochastic regulation signal is replaced by the specific extremely trajectories. Furthermore, the extremely trajectories are achieved by the day-ahead predicted regulation mileage. The resulting benefit is to transform the stochastic reserve scheduling problem into a deterministic optimization; (2) a model predictive control strategy is proposed to dispatch the industry park in real time with an objective to maximize the revenue. The proposed technology is tested using a real-world industrial electrolysis power system based upon Pennsylvania, Jersey, and Maryland (PJM) power market. Various scenarios are simulated to study the performance of the proposed approach to enable industry parks to provide ancillary service into the power market. The simulation results indicate that an industrial park with a capacity of 500 MW can provide up to 40 MW ancillary service for participation in the secondary frequency regulation. The proposed strategy is demonstrated to be capable of maintaining the economic and secure operation of the industrial park while satisfying performance requirements from the real world regulation market
Wind Farms and Flexible Loads Contribution in Automatic Generation Control: An Extensive Review and Simulation
With the increasing integration of wind energy sources into conventional power systems, the demand for reserve power has risen due to associated forecasting errors. Consequently, developing innovative operating strategies for automatic generation control (AGC) has become crucial. These strategies ensure a real-time balance between load and generation while minimizing the reliance on operating reserves from conventional power plant units. Wind farms exhibit a strong interest in participating in AGC operations, especially when AGC is organized into different regulation areas encompassing various generation units. Further, the integration of flexible loads, such as electric vehicles and thermostatically controlled loads, is considered indispensable in modern power systems, which can have the capability to offer ancillary services to the grid through the AGC systems. This study initially presents the fundamental concepts of wind power plants and flexible load units, highlighting their significant contribution to load frequency control (LFC) as an important aspect of AGC. Subsequently, a real-time dynamic dispatch strategy for the AGC model is proposed, integrating reserve power from wind farms and flexible load units. For simulations, a future Pakistan power system model is developed using Dig SILENT Power Factory software (2020 SP3), and the obtained results are presented. The results demonstrate that wind farms and flexible loads can effectively contribute to power-balancing operations. However, given its cost-effectiveness, wind power should be operated at maximum capacity and only be utilized when there is a need to reduce power generation. Additionally, integrating reserves from these sources ensures power system security, reduces dependence on conventional sources, and enhances economic efficiency
- …