2,625 research outputs found
System architecture and hardware implementations for a reconfigurable MPLS router
With extremely wide bandwidth and good channel properties, optical fibers have brought fast and reliable data transmission to today’s data communications. However, to handle heavy traffic flowing through optical physical links, much faster processing speed is required or else congestion can take place at network nodes. Also, to provide people with voice, data and all categories of multimedia services, distinguishing between different data flows is a requirement. To address these router performance, Quality of Service /Class of Service and traffic engineering issues, Multi-Protocol Label Switching (MPLS) was proposed for IP-based Internetworks. In addition, routers flexible in hardware architecture in order to support ever-evolving protocols and services without causing big infrastructure modification or replacement are also desirable. Therefore, reconfigurable hardware implementation of MPLS was proposed in this project to obtain the overall fast processing speed at network nodes.
The long-term goal of this project is to develop a reconfigurable MPLS router, which uniquely integrates the best features of operations being conducted in software and in run-time-reconfigurable hardware. The scope of this thesis includes system architecture and service algorithm considerations, Verilog coding and testing for an actual device. The hardware and software co-design technique was used to partition and schedule the protocol code for execution on both a general-purpose processor and stream-based hardware. A novel RPS scheme that is practically easy to build and can realize pipelined packet-by-packet data transfer at each output was proposed to take the place of the traditional crossbar switching. In RPS, packets with variable lengths can be switched intelligently without performing packet segmentation and reassembly. Primary theoretical analysis of queuing issues was discussed and an improved multiple queue service scheduling policy UD-WRR was proposed, which can reduce packet-waiting time without sacrificing the performance. In order to have the tests carried out appropriately, dedicated circuitry for the MPLS functional block to interface a specific MAC chip was implemented as well. The hardware designs for all functions were realized with a single Field Programmable Gate Array (FPGA) device in this project.
The main result presented in this thesis was the MPLS function implementation realizing a major part of layer three routing at the reconfigurable hardware level, which advanced a great step towards the goal of building a router that is both fast and flexible
PEARL: a programmable virtual router platform
International audienceProgrammable routers supporting virtualization are a key building block for bridging the gap between new Internet protocols and their deployment in real operational networks. This article presents the design and implementation of PEARL, a programmable virtual router platform with relatively high performance. It offers high flexibility by allowing users to control the configuration of both hardware and software data paths. The platform makes use of fast lookup in hardware and software exceptions in commodity multicore CPUs to achieve highspeed packet processing. Multiple isolated packet streams and virtualization techniques ensure isolation among virtual router instances
Deliverable JRA1.1: Evaluation of current network control and management planes for multi-domain network infrastructure
This deliverable includes a compilation and evaluation of available control and management architectures and protocols applicable to a multilayer infrastructure in a multi-domain Virtual Network environment.The scope of this deliverable is mainly focused on the virtualisation of the resources within a network and at processing nodes. The virtualization of the FEDERICA infrastructure allows the provisioning of its available resources to users by means of FEDERICA slices. A slice is seen by the user as a real physical network under his/her domain, however it maps to a logical partition (a virtual instance) of the physical FEDERICA resources. A slice is built to exhibit to the highest degree all the principles applicable to a physical network (isolation, reproducibility, manageability, ...). Currently, there are no standard definitions available for network virtualization or its associated architectures. Therefore, this deliverable proposes the Virtual Network layer architecture and evaluates a set of Management- and Control Planes that can be used for the partitioning and virtualization of the FEDERICA network resources. This evaluation has been performed taking into account an initial set of FEDERICA requirements; a possible extension of the selected tools will be evaluated in future deliverables. The studies described in this deliverable define the virtual architecture of the FEDERICA infrastructure. During this activity, the need has been recognised to establish a new set of basic definitions (taxonomy) for the building blocks that compose the so-called slice, i.e. the virtual network instantiation (which is virtual with regard to the abstracted view made of the building blocks of the FEDERICA infrastructure) and its architectural plane representation. These definitions will be established as a common nomenclature for the FEDERICA project. Other important aspects when defining a new architecture are the user requirements. It is crucial that the resulting architecture fits the demands that users may have. Since this deliverable has been produced at the same time as the contact process with users, made by the project activities related to the Use Case definitions, JRA1 has proposed a set of basic Use Cases to be considered as starting point for its internal studies. When researchers want to experiment with their developments, they need not only network resources on their slices, but also a slice of the processing resources. These processing slice resources are understood as virtual machine instances that users can use to make them behave as software routers or end nodes, on which to download the software protocols or applications they have produced and want to assess in a realistic environment. Hence, this deliverable also studies the APIs of several virtual machine management software products in order to identify which best suits FEDERICA’s needs.Postprint (published version
Recommended from our members
Design and Implementation of a High Performance Network Processor with Dynamic Workload Management
Internet plays a crucial part in today\u27s world. Be it personal communication, business transactions or social networking, internet is used everywhere and hence the speed of the communication infrastructure plays an important role. As the number of users increase the network usage increases i.e., the network data rates ramped up from a few Mb/s to Gb/s in less than a decade. Hence the network infrastructure needed a major upgrade to be able to support such high data rates. Technological advancements have enabled the communication links like optical fibres to support these high bandwidths, but the processing speed at the nodes remained constant. This created a need for specialised devices for packet processing in order to match the increasing line rates which led to emergence of network processors. Network processors were both programmable and flexible. To support the growing number of internet applications, a single core network processor has transformed into a multi/many core network processor with multiple cores on a single chip rather than just one core. This improved the packet processing speeds and hence the performance of a network node. Multi-core network processors catered to the needs of a high bandwidth networks by exploiting the inherent packet-level parallelism in a network. But these processors still had intrinsic challenges like load balancing. In order to maximise throughput of these multi-core network processors, it is important to distribute the traffic evenly across all the cores. This thesis describes a multi-core network processor with dynamic workload management. A multi-core network processor, which performs multiple applications is designed to act as a test bed for an effective workload management algorithm. An effective workload management algorithm is designed in order to distribute the workload evenly across all the available cores and hence maximise the performance of the network processor. Runtime statistics of all the cores were collected and updated at run time to aid in deciding the application to be performed on a core to to enable even distribution of workload among the cores. Hence, when an overloading of a core is detected, the applications to be performed on the cores are re-assigned. For testing purposes, we built a flexible and a reusable platform on NetFPGA 10G board which uses a FPGA-based approach to prototyping network devices. The performance of the designed workload management algorithm is tested by measuring the throughput of the system for varying workloads
Design and Implementation of HD Wireless Video Transmission System Based on Millimeter Wave
With the improvement of optical fiber communication network construction and the improvement of camera technology, the video that the terminal can receive becomes clearer, with resolution up to 4K. Although optical fiber communication has high bandwidth and fast transmission speed, it is not the best solution for indoor short-distance video transmission in terms of cost, laying difficulty and speed.
In this context, this thesis proposes to design and implement a multi-channel wireless HD video transmission system with high transmission performance by using the 60GHz millimeter wave technology, aiming to improve the bandwidth from optical nodes to wireless terminals and improve the quality of video transmission. This thesis mainly covers the following parts:
(1) This thesis implements wireless video transmission algorithm, which is divided into wireless transmission algorithm and video transmission algorithm, such as 64QAM modulation and demodulation algorithm, H.264 video algorithm and YUV420P algorithm.
(2) This thesis designs the hardware of wireless HD video transmission system, including network processing unit (NPU) and millimeter wave module. Millimeter wave module uses RWM6050 baseband chip and TRX-BF01 rf chip. This thesis will design the corresponding hardware circuit based on the above chip, such as 10Gb/s network port, PCIE.
(3) This thesis realizes the software design of wireless HD video transmission system, selects FFmpeg and Nginx to build the sending platform of video transmission system on NPU, and realizes video multiplex transmission with Docker. On the receiving platform of video transmission, FFmpeg and Qt are selected to realize video decoding, and OpenGL is combined to realize video playback.
(4) Finally, the thesis completed the wireless HD video transmission system test, including pressure test, Web test and application scenario test. It has been verified that its HD video wireless transmission system can transmit HD VR video with three-channel bit rate of 1.2GB /s, and its rate can reach up to 3.7GB /s, which meets the research goal
- …