Precoded FIR and Redundant V-BLAST Systems for Frequency-Selective MIMO Channels

The vertical Bell labs layered space-time (V-BLAST) system is a multi-input multioutput (MIMO) system designed to achieve good multiplexing gain. In recent literature, a precoder, which exploits channel information, has been added in the V-BLAST transmitter. This precoder forces each symbol stream to have an identical mean square error (MSE). It can be viewed as an alternative to the bit-loading method. In this paper, this precoded V-BLAST system is extended to the case of frequency-selective MIMO channels. Both the FIR and redundant types of transceivers, which use cyclic-prefixing and zero-padding, are considered. A fast algorithm for computing a cyclic-prefixing-based precoded V-BLAST transceiver is developed. Experiments show that the proposed methods with redundancy have better performance than the SVD-based system with optimal powerloading and bit loading for frequency-selective MIMO channels. The gain comes from the fact that the MSE-equalizing precoder has better bit-error rate performance than the optimal bitloading method

Channel equalization to achieve high bit rates in discrete multitone systems

textMulticarrier modulation (MCM) techniques such as orthogonal frequency division multiplexing (OFDM) and discrete multi-tone (DMT) modulation are attractive for high-speed data communications due to the ease with which MCM can combat channel dispersion. With all the benefits MCM could give, DMT modulation has an extra ability to perform dynamic bit loading, which has the potential to exploit fully the available bandwidth in a slowly time-varying channel. In broadband wireline communications, DMT modulation is standardized for asymmetric digital subscribe line (ADSL) and very-high-bit-rate digital subscriber line (VDSL) modems. ADSL and VDSL standards are used by telephone companies to provide high speed data service to residences and offices. In an ADSL receiver, an equalizer is required to compensate for the channel’s dispersion in the time domain and the channel’s distortion in the frequency domain of the transmitted waveform. This dissertation proposes design methods for linear equalizers to increase the bit rate of the connection. The methods are amenable to implementation on programmable fixed-point digital signal processors, which are employed in ADSL/VDSL transceivers. A conventional ADSL equalizer consists of a time-domain equalizer, a fast Fourier transform, and a frequency domain equalizer. The time domain equalizer (TEQ) is a finite impulse response filter that when coupled with a discretized channel produces an equivalent channel whose impulse response is shorter than that of the discretized channel. This channel shortening is required by the ADSL standards. In this dissertation, I first propose a linear phase TEQ design that exploits symmetry in existing eigen-filter approaches such as minimum mean square error(MMSE), maximum shortening signal to noise ratio (MSSNR) and minimum intersymbol interference (Min-ISI) equalizers. TEQs with symmetric coefficients can reach the same performance as non-symmetric ones with much lower training complexity. Second, I improve Min-ISI design. I reformulate the cost function to make long TEQs design feasible. I remove the dependency of transmission delay in order to reduce the complexity associated with delay optimization. The quantized weighting is introduced to further lower the complexity. I also propose an iterative optimization procedure of Min-ISI that completely avoids Cholesky decomposition hence is better suited for a fixed-point implementation. Finally I propose a dual-path TEQ structure, which designs a standard singleFIR TEQ to achieve good bit rate over the entire transmission bandwidth, and designs another FIR TEQ to improve the bit rate over a subset of subcarriers. Dualpath TEQ can be viewed as a special case of a complex valued filter bank structure that delivers the best bit rate of existing DMT equalizers. However, dual-path TEQ provides a very good tradeoff between achievable bit rate vs. implementation complexity on a programmable digital signal processor.Electrical and Computer Engineerin

Joint transceiver design for MIMO channel shortening.

Channel shortening equalizers can be employed to shorten the effective impulse response of a long intersymbol interference (ISI) channel in order, for example, to decrease the computational complexity of a maximum-likelihood sequence estimator (MLSE) or to increase the throughput efficiency of an orthogonal frequency-division multiplexing (OFDM) transmission scheme. In this paper, the issue of joint transmitter–receiver filter design is addressed for shortening multiple-input multiple-output (MIMO) ISI channels. A frequency-domain approach is adopted for the transceiver design which is effectively equivalent to an infinite-length time-domain design. A practical space–frequency waterfilling algorithm is also provided. It is demonstrated that the channel shortening equalizer designed according to the time-domain approach suffers from an error-floor effect. However, the proposed techniques are shown to overcome this problem and outperform the time-domain channel shortening filter design. We also demonstrate that the proposed transceiver design can be considered as a MIMO broadband beamformer with constraints on the time-domain multipath length. Hence, a significant diversity gain could also be achieved by choosing strong eigenmodes of the MIMO channel. It is also found that the proposed frequency-domain methods have considerably low computational complexity as compared with their time-domain counterparts

Enhanced multi-user DMT spectrum management using polynomial matrix decomposition techniques

This thesis researches the increasingly critical roles played by intelligent resource management and interference mitigation algorithms in present-day input multiple output (MIMO) communication systems. This thesis considers the application of polynomial matrix decomposition (PMD) algorithms, an emerging broadband factorisation technology for broadband MIMO access networks. Present DSL systems’ performance is constrained by the presence of interference (crosstalk) between multiple users sharing a common physical cable bundle. Compared to the traditional static spectrum management methods that define their survival to the worst-case scenarios, DSM methods provides some degree of flexibility to both direct channel and noise parameters to improve evolvability and robustness significantly. A novel crosstalk-aware DSM algorithm is proposed for the efficient management of multi-user DSL systems. Joint power allocation procedures are considered for the proposed single-channel equalisation method in DSL access networks. This thesis then shows that DSM can also benefit overdetermined precoding-equalisation systems, when the channel state information (CSI) parameters call for a specific decision feedback criterion to achieve a perfect reconstruction. A reasonable redundancy is introduced to reformulate the original multi-user MIMO problem into the simplest case of power management problem. DSM algorithms are primarily applied to solve the power allocation problem in DSM networks with the aim of maximising the system attribute rather than meeting specific requirements. Also, a powerful PMD algorithm known as sequential matrix diagonalisation (SMD) is used for analysing the eigenvalue decomposition problem by quantifying the available system resource including the effects of the crosstalk and its parameters. This analysis is carried out through joint precoding and equalisation structures. The thesis also investigates dynamic interference mitigation strategies for improving the performance of DSL networks. Two different mitigation strategies through a decision feedback equalisation (DFE) criterion are considered, including zero-forcing (ZF) and minimum mean square error (MMSE) equalisers. The difference between ZF and MMSE equalisations is analysed. Some experimental simulation results demonstrate the performance of both ZF and MMSE equalisation under the DFE equalisation constraint settings. Model reduction on the MMSE equalisation is thus applied to balance the crosstalk interference and enhance the data-rate throughput. Finally, the thesis studies a multi-user MIMO problem under the utility maximisation framework. Simulation results illustrate that the power allocation of multi-user DSL transmission can be jointly controlled and the interference can often be mitigated optimally on a single user basis. Driven by imperfect CSI information in current DSL networks, the research presents a novel DSM method that allows not only crosstalk mitigation, but also the exploitation of crosstalk environments through the fielding of versatile, flexible and evolvable systems. The proposed DSM tool is presented to achieve a robust mitigating system in any arbitrary overdetermined multi-user MIMO environment. Numerical optimisation results show that the mitigation of crosstalk impairment using the proposed DSM strategy. The design and implementation of the proposed DSM are carried out in the environment of MATLAB

Optimal designs for linear and nonlinear precoders and decoders

Master'sMASTER OF ENGINEERIN

MIMO Systems

In recent years, it was realized that the MIMO communication systems seems to be inevitable in accelerated evolution of high data rates applications due to their potential to dramatically increase the spectral efficiency and simultaneously sending individual information to the corresponding users in wireless systems. This book, intends to provide highlights of the current research topics in the field of MIMO system, to offer a snapshot of the recent advances and major issues faced today by the researchers in the MIMO related areas. The book is written by specialists working in universities and research centers all over the world to cover the fundamental principles and main advanced topics on high data rates wireless communications systems over MIMO channels. Moreover, the book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity

Space-time-frequency methods for interference-limited communication systems

textTraditionally, noise in communication systems has been modeled as an additive, white Gaussian noise process with independent, identically distributed samples. Although this model accurately reflects thermal noise present in communication system electronics, it fails to capture the statistics of interference and other sources of noise, e.g. in unlicensed communication bands. Modern communication system designers must take into account interference and non-Gaussian noise to maximize efficiencies and capacities of current and future communication networks. In this work, I develop new multi-dimensional signal processing methods to improve performance of communication systems in three applications areas: (i) underwater acoustic, (ii) powerline, and (iii) multi-antenna cellular. In underwater acoustic communications, I address impairments caused by strong, time-varying and Doppler-spread reverberations (self-interference) using adaptive space-time signal processing methods. I apply these methods to array receivers with a large number of elements. In powerline communications, I address impairments caused by non-Gaussian noise arising from devices sharing the powerline. I develop and apply a cyclic adaptive modulation and coding scheme and a factor-graph-based impulsive noise mitigation method to improve signal quality and boost link throughput and robustness. In cellular communications, I develop a low-latency, high-throughput space-time-frequency processing framework used for large scale (up to 128 antenna) MIMO. This framework is used in the world's first 100-antenna MIMO system and processes up to 492 Gbps raw baseband samples in the uplink and downlink directions. My methods prove that multi-dimensional processing methods can be applied to increase communication system performance without sacrificing real-time requirements.Electrical and Computer Engineerin